ARMY A-A-50176-1988 BOWL BAPTISMAL《洗礼碗》.pdf

《ARMY A-A-50176-1988 BOWL BAPTISMAL《洗礼碗》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-50176-1988 BOWL BAPTISMAL《洗礼碗》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-501 76 October 7, 1988 CObPIERCIAL ITEM DESCRIPTION BOWL, BAPTISMAL The General Services Administration has authorized the use of this commercial item description in preference to MIL-B-43401. 1. SALIENT CHARACTERISTICS 1.1 Design and construction. The baptismal bowl shall be fabricated of comer

2、cial brass with a chromium plate finish. The bowl should approximate 9-70 inches in diameter, with a 5-6 inch round base. The overall height shall be 5 inches 2 1 inch. Design of the bowl shall be the manufacturers standard commercial model. 2. QUALITY ASSURANCE 2.1 Certification. The contractor sha

3、ll certify that the product offered meets the salient characteristics of this description and conforms to the producers own drarIings, specifications, standards, and quality assurance practices. When specific quality assurance provisions are specified for any commercial characteristic the contractor

4、 shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 3

5、. PACKAGING REQUIREMENTS 3.1 Packaging. Each baptismal bowl shall be completely enclosed in a clear polyethylene bag. Bags shall be closed by folding the end around and securing it with a piece of pressure sensitive tape. Each bowl shall then be inserted into a snug-fitting folding or set-up paperbo

6、ard box. 3.2 Packing. Six baptismal bowls, packaged as specified, shall be packed in a snug-fitting RSC style corrugated fiberboard shipping container conforming to type CF, (variety SW) or SF, class domestic, grade 275 of PPP-B-636. The shipping container shall be completely filled with no voids, a

7、nd of a size that can be palletized in accordance with MIL-STD-147. be closed in accordance with the appendix of PPP-3-636. Each shipping container shall AMSC NIA FSC 9925 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. a Provided by IHSNot for ResaleNo reproduction

8、 or networking permitted without license from IHS-,-,-A-A-501 76 3.3 Palletization. When specified (see 4.2) ,. baptismal bowls, packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. O or P, in accordance with MIL-STD-147. Each prepared load

9、 shall be bonded by means K and L or 3.4 Marking. purchase order, unit packs, shipping containers and unitized pallet loads shall be marked in accordance with MIL-STD-129. In addition to any special markings required by the contract or 4. NOTES 4.1 use during Baptismal Ceremonies. Intended use. The

10、baptismal bowl covered by this document is intended for 4.2 Ordering data. a. Title, number, and date of this document. b. When palletization is required (see 3.3). 4.3 Source of government documents. are availa.ble from: Copies of military and Federal documents Naval Publications and Forms Center 5

11、801 Tabor Avenue Philadelphia, PA 191 02 MILITARY INTERESTS : CIVIL AGENCY COORDI NAT ING ACTIVITY: Custodians : GSA - FSS Army - GL Navy - PE Preparing activity: Air Force - 28 Army - GL Review activities: Navy - PE Air Force - 28 Armed Forces Chaplains board Project No. 9925-1015 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-