ARMY A-A-50172-1988 COLLECTION PLATE《奉献盘》.pdf

《ARMY A-A-50172-1988 COLLECTION PLATE《奉献盘》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-50172-1988 COLLECTION PLATE《奉献盘》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-501 72 October 3, 1988 COMMERCIAL ITEM DESCRIPTION COLLECT ION PLATE The General Services Administration has authorized the use of this commercial item description in preference to MIL-C-43474. 1. SALIENT CHARACTERISTICS 1.1 Design and construction. The collection plate shall be fabricated of co

2、mercial brass with a chromium plate finish. The plate shall be round in design and measure 12 inches f one inch with a depth of 2-1/2 inches 2 one inch. The base shall be round and measure 6 inches 2 1 inch. A velour mat, reinforced by cardboard and glued to the plate, as available in the supplier?

3、commercial practice may be included as an optional item. The color of the cotton velour mat may be specified by the procuring activity. 2 QUALITY ASSURANCE 2.1 Certification. The contractor shall certify that the product offered meets the salient characteristics and requirements of this description

4、and conforms to the producer? s own drawings, specifications, standards, and quality assurance practices. When specific quality assurance provisions are specified for any commercial characteristic the contractor shall furnish data resulting from inspection conducted in accordance with the specific q

5、uality assurance provisions. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 3. PACKAGING 3.1 Packaging. Each collection plate shall be completely enclosed in a clear

6、polyethylene bag. Bags shall be closed by folding the end around and securing it with a piece of pressure-sensitive tape. Each plate shall then be inserted into a snug-fitting folding or Set-up paperboard box. 3.2 Packing. Twelve collection plates, packaged as specified, shall be packed in a snug-fi

7、tting RSC style corrugated fiberboard shipping container conforming to type CF, (variety SW) or SF, class domestic, grade 275 of PPP-B-636. and of size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be closed in accordance with the appendix of The shipping conta

8、iner shall be completely filled with no voids, PPP-B-536. ABC N/A FSC 9925 DISTRIBWION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-501 72 3.3 Palletization. When specified (

9、see 4.21, collection plates, packed as specified, shall be palletized on a 4-way entry pallet in accordance with load type la of MIL-STD-147. Each prepared load shall be bonded by means K and L or O or P, in accordance with MIL-STD-147. 3.4 Marking. purchase order, unit packs, shipping containers an

10、d unitized pallet loads shall be marked in accordance with MIL-STD-129. In addition to any special markings required by the contract or 4. NOTES 4.1 Intended use. The collection plate covered by this document is intended to receive offerings at religious services in Military Chapels. 4.2 Ordering da

11、ta. a. Title, number, and date of this document. b. When palletization is required (see 3.3). 4.3 Source for government documents. Copies of military and Federal documents are available from: Naval Publications and Forms Center 5801 Tabor Avenue Philadelphia, PA 191 20 MILITARY INTERESTS : CIVIL AGE

12、NCY COORDINATING ACT IV IT Y: Custodians : Army - GL Navy - PE Air Force - 28 GSA - FSS P re par i ng Act i vi ty : Army - GL Review Activities: PROJECT NO. 9925-101 1 Navy - PE Air Force - 28 Armed Forces Chaplains Board 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-