ANSI IEEE C62.23-1995 Application Guide for Surge Protection of Electric Generating Plants.pdf

《ANSI IEEE C62.23-1995 Application Guide for Surge Protection of Electric Generating Plants.pdf》由会员分享，可在线阅读，更多相关《ANSI IEEE C62.23-1995 Application Guide for Surge Protection of Electric Generating Plants.pdf（51页珍藏版）》请在麦多课文档分享上搜索。

1、 Copyright 1999 IEEE All Rights Reserved1IEEE Std C62.23-1995(R2001)IEEE Application Guide for Surge Protection of Electric Generating PlantsSponsorSurge-Protective Devices Committeeof theIEEE Power Engineering SocietyApproved May 2, 2002American National Standards InstituteReaffirmed December 6,200

2、1Approved January 18, 1995 IEEE Standards BoardAbstract: This standard consolidates most electric utility power industry practices, accepted theories,existing standards/guides, definitions, and technical references as they specifically pertain to surgeprotection of electric power generating plants.

3、Where technical information is not readily available,guidance is provided to aid toward proper surge protection and to reduce interference to communication,control, and protection circuits due to surges and other overvoltages. It has to be recognized that thisapplication guide approaches the subject

4、 of surge protection from a common or generalized applicationviewpoint. Complex applications of surge protection practices may require specialized study byexperienced engineers.Keywords: electric utilities, electric power, electric generating plants, generating plants, power plants,surge protectionT

5、he Institute of Electrical and Electronics Engineers, Inc.345 East 47th Street, New York, NY 10017-2394, USACopyright 1995 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 1995. Printed in the United States of America.ISBN 1-55937-520-5No part of this publ

6、ication may be reproduced in any form, in an electronic retrieval system or otherwise, without theprior written permission of the publisher.IEEE Standardsdocuments are developed within the Technical Committees of theIEEE Societies and the Standards Coordinating Committees of the IEEE StandardsBoard.

7、 Members of the committees serve voluntarily and without compensation.They are not necessarily members of the Institute. The standards developed withinIEEE represent a consensus of the broad expertise on the subject within the Instituteas well as those activities outside of IEEE that have expressed

8、an interest in partici-pating in the development of the standard.Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standarddoes not imply that there are no other ways to produce, test, measure, purchase, mar-ket, or provide other goods and services related to the scope of the IEE

9、E Standard.Furthermore, the viewpoint expressed at the time a standard is approved and issued issubject to change brought about through developments in the state of the art and com-ments received from users of the standard. Every IEEE Standard is subjected toreview at least every five years for revi

10、sion or reaffirmation. When a document ismore than five years old and has not been reaffirmed, it is reasonable to conclude thatits contents, although still of some value, do not wholly reflect the present state of theart. Users are cautioned to check to determine that they have the latest edition o

11、f anyIEEE Standard.Comments for revision of IEEE Standards are welcome from any interested party,regardless of membership affiliation with IEEE. Suggestions for changes in docu-ments should be in the form of a proposed change of text, together with appropriatesupporting comments.Interpretations: Occ

12、asionally questions may arise regarding the meaning of portionsof standards as they relate to specific applications. When the need for interpretationsis brought to the attention of IEEE, the Institute will initiate action to prepare appro-priate responses. Since IEEE Standards represent a consensus

13、of all concerned inter-ests, it is important to ensure that any interpretation has also received the concurrenceof a balance of interests. For this reason IEEE and the members of its technical com-mittees are not able to provide an instant response to interpretation requests except inthose cases whe

14、re the matter has previously received formal consideration. Comments on standards and requests for interpretations should be addressed to:Secretary, IEEE Standards Board445 Hoes LaneP.O. Box 1331Piscataway, NJ 08855-1331USAIEEE Standards documents may involve the use of patented technology. Theirapp

15、roval by the Institute of Electrical and Electronics Engineers does not mean thatusing such technology for the purpose of conforming to such standards is authorizedby the patent owner. It is the obligation of the user of such technology to obtain allnecessary permissions.iiiIntroduction(This introdu

16、ction is not a part of IEEE Std C62.23-1995, IEEE Application Guide for Surge Protection of Electric Gen-erating Plants.)The need for an application guide for surge protection of electric generating plants was indicated in 1979when the US Nuclear Regulatory Commission published a draft regulatory gu

17、ide and value/impact statemententitled, “Lightning Protection for Nuclear Power Plants.”After meetings between IEEE Surge-Protective Devices Committee members and members of the USNuclear Regulatory Commission, it was agreed that the task of writing an application guide for the surgeprotection of el

18、ectric generating plants would be performed by a specially assigned working group of theIEEE Surge-Protective Devices Committee.The first function of this working group was to publish a bibliography containing many standards and tech-nical papers pertaining to the protection of all elements inside a

19、 power plant complex. The “Bibliography onPower Generating Plants Surge Protection” was published in IEEE Transactions on Power Delivery, vol. 6,no. 2, pp. 754793, April 1991.The working group also decided that this guide should not only cover nuclear power plants but that themethod of surge protect

20、ion is applicable to nuclear as well as all electric generating plants, and that no spe-cial differentiation should be made.This guide is the result of efforts of the working group over a period of more than ten years. The workinggroup is part of the application of Surge-Protective Devices Subcommit

21、tee, sponsored by the Surge-Protec-tive Devices Committee of the IEEE Power Engineering Society. Comments were also solicited from the fol-lowing groups:IEEE Power Engineering Society/Transmission and Distribution CommitteeIEEE Power Engineering Society/Power System Relaying CommitteeIEEE Power Engi

22、neering Society/Nuclear Power Engineering CommitteeIEEE Power Engineering Society/Substations CommitteeIEEE Power Engineering Society/Power System Communications CommitteeIEEE Power Engineering Society/Energy Development and Power Generation CommitteeIEEE Power Engineering Society/Electric Machinery

23、 CommitteeIEEE Industry Applications Society/Power Systems Engineering CommitteeSuggestions for the improvement of this guide will be welcome. They should be sent toSecretaryIEEE Standards BoardInstitute of Electrical and Electronic Engineers, Inc.445 Hoes LaneP. O. Box 1331Piscataway, NJ 08855-1331

24、USAivAt the time this guide was completed, the working group on surge protection of generating plants had thefollowing membership:Gilbert L. Gaibrois,ChairAldean Benge John A. Hetrick Joseph L. KoepfingerGordon Black David W. Jackson Subinoy MazumdarJim R. Detweiler Robert A. Jones Burt NemroffH. E.

25、 Foelker E. W. Knapp William R. Ossman (past chair)George S. Haralampu (past chair) Edgar R. Taylor, Jr.The following persons were on the balloting committee:Charles L. Ballentine Andrew R. Hileman John B. PoseyMike G. Comber Hieu Huynh Keith B. StumpDouglas C. Dawson David W. Jackson Dennis P. Syma

26、nskiCliff Erven Bengt Johnnerfelt Edgar R. Taylor, Jr.H. E. Foelker Robert A. Jones Rao ThallamGilbert L. Gaibrois Stanley S. Kershaw Arnold VitolsGeorge S. Haralampu Gerald E. Lee Steve G. WhisenantJohn A. Hetrick Joseph C. Osterhout J. W. WilsonAt the time this standard was published, it was under

27、 consideration for approval as an American NationalStandard. The Accredited Standards Committee on Surge Arresters, C62, had the following members at thetime this document was sent to letter ballot:Joseph L. Koepfinger,ChairJohn A. Gauthier,SecretaryOrganization Represented Name of RepresentativeAll

28、iance for Telecommunications Industry Solutions . C. ChrysanthouAssociation of American Railroads.Wayne EtterBonneville Power Administration . G. E. LeeCanadian Standards Association (Liaison). D. M. SmithElectric Light and Power R. A. JonesH. E. FoelkerW. A. MaguireJ. W. WilsonM. C. Mingoia (Alt.)F

29、. MartinezInstitute of Electrical and Electronics Engineers.J. L. KoepfingerJ. J. BurkeG. L. GaibroisW. H. KappS. S. Kershaw, Jr.C. Hansell (Alt.)Edgar Taylor (Alt.)National Electrical Manufacturers Association .Dennis W. LenkBernhard WolffD. WordenLarry BockJ. WoodworthvNational Institute of Standa

30、rds and Technology. F. D. MartzloffRural Electrification Administration.George J. BagnallUnderwriters Laboratories.P. NotarianLarry Williams (Alt.)Members-at-Large . J. OsterhoutB. PanesarR. B. StandlerThe final conditions for approval of this standard were met on January 18, 1995. This standard was

31、 condi-tionally approved by the IEEE Standards Board on December 13, 1994, with the following membership:Wallace S. Read,ChairDonald C. Loughry,Vice ChairAndrew G. Salem,SecretaryGilles A. Baril Donald N. Heirman Joseph L. Koepfinger*Bruce B. Barrow Richard J. Holleman D. N. “Jim” LogothetisJos A. B

32、errios de la Paz Jim Isaak L. Bruce McClungClyde R. Camp Ben C. Johnson Marco W. MigliaroJames Costantino Sonny Kasturi Mary Lou PadgettStephen L. Diamond Lorraine C. Kevra Arthur K. ReillyDonald C. Fleckenstein E. G. “Al” Kiener Ronald H. ReimerJay Forster* Ivor N. Knight Gary S. RobinsonRamiro Gar

33、cia Leonard L. Tripp*Member EmeritusAlso included are the following nonvoting IEEE Standards Board liaisons:Satish K. AggarwalJames BeallRichard B. EngelmanRobert E. HebnerMary Lynne NielsenIEEE Standards Project EditorviiContentsCLAUSE PAGE1. Overview 12. References 33. Definitions 64. Power lines.

34、 64.1 Scope 64.2 Protection of transmission lines. 74.3 Protection of distribution lines. 135. Switchyard . 165.1 Scope 165.2 Equipment protection. 165.3 Controls/Communication. 196. Power plant 276.1 Scope 276.2 Equipment protection. 286.3 Controls/Communication. 317. Remote ancillary facilities .

35、377.1 Scope 377.2 Indoor equipment. 377.3 Outdoor equipment 37ANNEXESAnnex A Soil resistivity 38Annex B Bibliography 391IEEE Application Guide for Surge Protection of Electric Generating Plants1. OverviewThis application guide consolidates most electric utility power industry practices, accepted the

36、ories, existingstandards/guides, definitions, and technical references as they specifically pertain to surge protection of elec-tric power generating plants. Where technical information is not readily available, guidance is provided toaid toward proper surge protection and to reduce interference to

37、communication, control, and protection cir-cuits due to surges and other overvoltages. It has to be recognized that this application guide approaches thesubject of surge protection from a common or generalized application viewpoint. Complex applications ofsurge protection practices may require speci

38、alized study by experienced engineers.Surge overvoltages can cause equipment damage, system malfunction, or power interruptions at electricpower generating plants if plants are not adequately protected against them. Excessive surge voltages haveto, therefore, be controlled or reduced to permissible

39、levels. These overvoltage surges in power generatingplants may be generated by lightning or by system events such as switching, faults, load rejections, or bysome combinations of these.The subject of surge protection of power generating plants is very broad and complex, with many ramifica-tions. To

40、provide an understanding for consistent and comprehensive surge protection and to reduce interfer-ence, the power generating plant has been divided in this guide into four subareas: the power lines, theswitchyard, the power plant, and the remote ancillary systems (see figure 1). Within each subarea,

41、 the “surgeenvironment” in which the associated equipment and systems are required to operate is addressed in terms ofthe common overvoltage and electromagnetic interference sources identified below: Direct lightning strokes Incoming surges Internally generated surges Ground potential rise Electroma

42、gnetic interference To evaluate each of these sources, the following questions are addressed: Is there a surge or interference problem from this source? How is surge protection accomplished? What standards and guides are available? How is surge interference initiated?A typical power generating plant

43、 is illustrated by the one-line diagram in figure 2. The subareas “switchyard” and “power lines” include the substation equipment, the incoming power andcommunication lines, and utilization power systems, as well as other plant switchyard systems. The “powerplant” subarea includes the power equipmen

44、t (distribution and utilization) and its associated communication,instrumentation, and protective/control equipment. IEEEStd C62.23-1995 IEEE APPLICATION GUIDE FOR SURGE PROTECTION2The “remote ancillary facilities” subarea includes all equipment pertaining to systems outside the powerplant and switc

45、hyard, such as fuel handling facilities, the water intake building, the weather tower, outsideplant monitoring facilities, etc. Figure 1Power generating plant block diagramIEEEOF ELECTRIC GENERATING PLANTS Std C62.23-199532. ReferencesThis guide shall be used in conjunction with the listed reference

46、s applicable to the electrical system to beprotected.Accredited Standards Committee (ASC) C2-1993, National Electrical Safety Code.1Figure 2Power generating plant simplified one-line diagramIEEEStd C62.23-1995 IEEE APPLICATION GUIDE FOR SURGE PROTECTION4ANSI C62.61-1993, American National Standard f

47、or Gas Tube Surge Arresters on Wire Line TelephoneCircuits.ANSI/NFPA 70-1993, National Electrical Code.2ANSI/NFPA 780-1992, Lightning Protection Code.IEEE Std 18-1992, IEEE Standard for Shunt Power Capacitors (ANSI).3IEEE Std 141-1993, IEEE Recommended Practice for Electric Power Distribution for In

48、dustrial Plants(IEEE Red Book) (ANSI).IEEE Std 142-1991, IEEE Recommended Practice for Grounding of Industrial and Commercial Power Sys-tems (IEEE Green Book) (ANSI).IEEE Std 367-1987, IEEE Recommended Practice for Determining the Electric Power Station GroundPotential Rise and Induced Voltage from

49、a Power Fault (ANSI).IEEE Std 368-1977, IEEE Recommended Practice for Measurement of Electrical Noise and Harmonic FilterPerformance of High-Voltage Direct-Current Systems.4IEEE Std 384-1992, IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits.IEEE Std 487-1992, IEEE Recommended Practice for the Protection of Wire Line Communications Facili-ties Serving Electric Power Stations (ANSI).IEEE Std 518-1982 (Reaff. 1990), IEEE Guide for the Installation of Electrical Equipment to MinimizeNoise Inputs to Controllers from External Sources (ANSI).IEEE Std 519-19