AECMA PREN 4171-2005 Aerospace series Paints and varnishes Test method for determination of phosphoric acid index Edition P 1《航空航天系列.油漆涂料试验方法磷酸含量测定.P1版》.pdf

《AECMA PREN 4171-2005 Aerospace series Paints and varnishes Test method for determination of phosphoric acid index Edition P 1《航空航天系列.油漆涂料试验方法磷酸含量测定.P1版》.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 4171-2005 Aerospace series Paints and varnishes Test method for determination of phosphoric acid index Edition P 1《航空航天系列.油漆涂料试验方法磷酸含量测定.P1版》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、ASD STANDARD NORME ASD ASD NORM prEN 4171 Edition P1 November 2005 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONGulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION Aerospace seri

2、es Paints and varnishes Test method for determination of phosphoric acid index Srie arospatiale Peintures et vernis Dtermination de la teneur en acide phosphorique Luft- und Raumfahrt Anstrichstoffe Phosphorsauere Belastung This “Aerospace Series“ Prestandard has been drawn up under the responsibili

3、ty of ASD-STAN (The Aerospace and Defense Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Pr

4、estandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (pr

5、EN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting wit

6、h the EN. Edition approved for publication 30 November 2005 Comments should be sent within six months after the date of publication to ASD-STAN Non-metallic Material Domain Copyright 2005 by ASD-STAN Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under lice

7、nse with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4171:20052 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and definitions .3 4 Principle3 5 Apparatus .3 6 Specimen4 7 Procedure .4 8 Results5 9 Designation 5 10 Test report 5 Fo

8、reword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Non-metallic Material Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. Copyright

9、Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4171:2005 3 1 Scope This test standard specifies a method for the titration and determination of the phospho

10、ric acid content of an hydroalcoholic solution for aerospace applications. This test method is relevant for the determination of total acidity and phosphoric acid content in a reactive thinner of a wash primer or in metal cleaners. 2 Normative references The following referenced documents are indisp

11、ensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1513, Paints and varnishes Examination and preparation of samples for testing. ISO 3696, W

12、ater for analytical laboratory use Specification and test methods. ISO 15528, Paints, varnishes and raw materials for paints and varnishes Sampling. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 reactive thinner alcoholic phosphoric acid so

13、lution, which reacts with the metallic substrate and the base 3.2 metal cleaner aqueous phosphoric acid solution for the removal of slightly oxidic films on aluminium 4 Principle The phosphoric acid content is determined by titration with aqueous solution of sodium or potassium hydroxide after ionis

14、ation of the phosphoric acid. Successive pH jumps allow the determination of: total acidity; phosphoric acid content. 5 Apparatus conical flasks: 250 ml; burette: 50 ml or 100 ml; PTFE coated magnetic stirrer; pipette: 10 ml; Copyright Association Europeene des Constructeurs de Materiel Aerospatial

15、Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4171:2005 4 buffered solutions (pH = 4,5 and pH = 6,2); indicator solution (helianthine and phenolphtalein); automatic acid/base titrator or glass electrode (and SCE electr

16、ode); 1 N sodium or potassium hydroxide solution: (calibrate N using phthalic acid). All chemicals are analytical reagent grade. Titration has to be carried out accordingly. 6 Specimen Test specimen shall be taken directly from the original container. See ISO 1513 and ISO 15528. 7 Procedure In the c

17、onical flask containing an accurate volume of 10 ml, (Vs), of the test specimen, add approximately 150 ml of fresh distilled water in accordance with ISO 3696; Introduce the magnetic stirring bar and pu t the erlenmeyer on the magnetic stirrer; Add few drops of both coloured indicators in case of ma

18、nual procedure; Introduce the glass electrode and the SCE in case of pH-f (V) procedure; Using automatic or manual procedure add slowly the alkaline solution and record alkaline solution volume versus pH or colour change; Determine accurately the volume of alkali added to achieve the first and secon

19、d end points indicated by observed jumps in pH using the potentiometric method or colour change in the case of the manual procedure. According to the pKa of the phosphoric acid (2,1, 7,2, 12,7) three main pH jumps are theoretically detected, but the two first jumps (pH 4,5 and 9) are detected with g

20、ood accuracy (see Figure 1); Note V1 and V2, the alkaline solution volume required to obtain these two pH jumps or colour change. 9 4,5 V (ml) Figure 1 Titration of phosphoric acid by a strong base. Typical curve CAUTION In case of solution containing phosphoric acid as only acidic material, theoret

21、ically V1 = V2 but due to carbonic acid dissolved in water V2 may be slightly higher than V1. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 4171

22、:2005 5 8 Results Acid normality: N1 = (V1*N)/Vs. H3PO4content: Na = 3*(V2-V1)*N/Vs. In order to avoid the contribution of the presence of any other strong acid in the test specimen, for the calculation of the phosphoric acid content only the difference (V2 V1) shall be used. 9 Designation EXAMPLE D

23、escription block PHOSPHORIC ACID INDEX Identity block EN4171 Number of this standard 10 Test report This test standard specifies a method for the titration and determination of the phosphoric acid content of an hydroalcoholic solution used in etch primer activators for aerospace applications. a) des

24、ignation of standard; b) date; c) product designation; d) batch number; e) code number; f) N (Normality of sodium or potassium hydroxide solution); g) N1 (Acid normality); h) Na (H3PO4content); i) test procedure: coloured indicators, pH = f (V). Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-