ABS 105-2016 GUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS.pdf

《ABS 105-2016 GUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS.pdf》由会员分享，可在线阅读，更多相关《ABS 105-2016 GUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS.pdf（90页珍藏版）》请在麦多课文档分享上搜索。

1、 Guide for Crew Habitability on Offshore Installations GUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS FEBRUARY 2016 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2016 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston,

2、 TX 77060 USA Foreword Foreword (1 February 2016) This Guide, originally published in May 2002, has undergone significant revision. Key revisions areas include a change in the Whole-body Vibration (WBV) and Noise measurement and evaluation methodology and criteria, changes to the ambient Lighting me

3、thodology and criteria, and changes to the Accommodation Area criteria. These revisions are due to several factors including: 1. Input from industry (i.e., Owners, designers, and construction yards), 2. Revisions to standards referenced in this Guide 3. Revised statutory regulations 4. Changes in cu

4、rrent installation design practices and principles ABS has produced this Guide for Crew Habitability on Offshore Installations in order to provide a single source for habitability criteria suitable for offshore installations. This Guide may be applied to installations falling under the categories of

5、 tension leg platforms (TLPs), floating production, storage and offloading (FPSOs), floating, storage and offloading (FSOs), spars, fixed platforms or any other buoyant or non-buoyant structure supported by or attached to the seafloor. This Guide does not apply to offshore service vessels, dredgers,

6、 or mobile offshore drilling units such as self-elevating drilling units (SEDUs), column-stabilized drilling units, or drillships. These types of vessels are covered in other ABS Habitability Guides*. This Guide provides the assessment criteria and describes the measurement methodology for obtaining

7、 a Habitability notation. It is intended for use by installation Owners, operators or companies requesting an optional notation of offshore installation Habitability (HAB(OS), offshore installation Habitability Plus (HAB+(OS), or offshore installation Habitability Plus Plus (HAB+(OS) for offshore in

8、stallations. For the HAB(OS) level, this Guide focuses on five (5) categories of habitability criteria that can affect task performance and can be controlled, measured, and assessed in personnel work, rest, and recreation areas of offshore installations. These categories are: personnel accommodation

9、 area design, whole-body vibration (separate criteria for accommodation areas and work spaces), noise, indoor climate and lighting. For the HAB+(OS) level, this Guide invokes more stringent accommodation area, whole-body vibration, and noise criteria aimed at increasing personnel comfort and safety.

10、 For the HAB+(OS) level there are more stringent whole-body vibration, noise, and indoor climate criteria. To be awarded any of these notations, an installation must meet the appropriate prescriptive criteria across the various habitability categories. In addition to the HAB notation assignment, at

11、the Owners request, ABS may review the accommodation area design for compliance with ILO MLC, 2006 Title 3 requirements, as related to the MLC-ACCOM notation. * Note: The other ABS Habitability Guides include: ABS Guide for Crew Habitability on Ships, ABS Guide for Crew Habitability on Workboats, an

12、d ABS Guide for Crew Habitability on Mobile Offshore Drilling Units. This Guide becomes effective on the first day of the month of publication. Users are advised to check periodically on the ABS website www.eagle.org to verify that this version of this Guide is the most current. We welcome your feed

13、back. Comments or suggestions can be sent electronically by email to rsdeagle.org. ii ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 Table of Contents GUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS CONTENTS SECTION 1 General 1 1 Introduction . 1 2 Application 1 3 Scope 1 4 Ter

14、minology 2 5 Associated Documentation . 3 6 Notation . 3 7 Data and Plans to be Submitted . 4 7.1 General 4 7.2 Personnel Accommodation Areas . 4 7.3 Ambient Environment 4 8 Process for Obtaining a Notation 5 8.1 Personnel Accommodation Areas . 6 8.2 Ambient Environment 7 8.3 Results 8 9 Initial Req

15、uirements 8 10 Surveys after Construction 8 11 Alternatives . 8 11.1 General 8 11.2 National Regulations . 8 11.3 Departures from Criteria 8 TABLE 1 Threshold for Measurements to be Considered Close to Non-Compliance . 7 FIGURE 1 Process for Obtaining a Habitability Notation . 6 SECTION 2 Personnel

16、Accommodation Areas 10 1 Background . 10 2 Scope 10 3 Terminology 10 4 Associated Documentation . 10 5 Criteria . 11 6 Personnel Accommodation Area Documentation . 11 6.1 Data Requirements . 11 ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 iii 7 Submittal Review and Verification 11

17、8 Results 11 SECTION 3 Whole-body Vibration 12 1 Background . 12 2 Scope 12 3 Terminology 12 4 Associated Documentation . 13 5 Criteria . 14 6 Test Plan . 15 6.1 Documentation 15 6.2 Test Personnel 15 6.3 Test Conditions 15 6.4 Measurement Locations 15 6.5 Data Acquisition and Instruments 15 6.6 Dat

18、a Analysis . 15 6.7 Test Schedule 15 6.8 Data Collection Sheets 16 6.9 Conflict of Interest Declaration . 16 7 Test Requirements 16 7.1 General 16 7.2 Data Acquisition and Instruments 16 7.3 Test Conditions 16 7.4 Measurement Locations 17 8 Test Report . 18 8.1 Test Details 18 8.2 Transducer Placeme

19、nt Positions . 18 8.3 Measurement Equipment Details . 18 8.4 Results . 18 8.5 Deviations 19 8.6 Surveyor Witnessing Documentation . 19 9 Results 19 TABLE 1 Maximum Weighted Root-Mean-Square Acceleration Level 15 TABLE 2 Distribution of Transducer Positions Within Spaces . 18 FIGURE 1 Measurement Axe

20、s . 14 SECTION 4 Noise 20 1 Background . 20 2 Scope 20 3 Terminology 20 4 Associated Documentation . 21 iv ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 5 Criteria . 21 5.1 Equivalent Continuous A-weighted Sound Pressure Level 21 5.2 Acoustic Insulation 21 6 Test Plan . 23 6.1 Docum

21、entation 23 6.2 Test Personnel 23 6.3 Test Conditions . 23 6.4 Measurement Locations 23 6.5 Data Acquisition and Instruments 23 6.6 Data Analysis 23 6.7 Test Schedule . 23 6.8 Data Collection Sheets 23 6.9 Conflict of Interest Declaration 23 7 Test Requirements 24 7.1 General 24 7.2 Data Acquisition

22、 and Instruments 24 7.3 Test Conditions . 24 7.4 Measurement Locations 25 7.5 Measurement Procedures and Recorded Results . 26 8 Test Report . 26 8.1 Test Details . 26 8.2 Measurement Positions . 26 8.3 Measurement Equipment Details 26 8.4 Results 26 8.5 Deviations 27 8.6 Surveyor Witnessing Documen

23、tation 27 9 Results 27 TABLE 1 Noise Criteria 22 SECTION 5 Indoor Climate 28 1 Background . 28 2 Scope 28 3 Terminology 28 4 Associated Documentation . 29 5 Criteria . 29 5.1 Air Temperature 30 5.2 Relative Humidity 30 5.3 Enclosed Space Vertical Gradient . 30 5.4 Air Velocity 30 5.5 Personnel Cabin

24、 Area Horizontal Gradient 30 5.6 Air Supply Quantity 30 5.7 Summary . 30 6 Test Plan . 31 6.1 Documentation 31 6.2 Test Personnel 31 6.3 Test Conditions . 31 ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 v 6.4 Measurement Locations 31 6.5 Data Acquisition and Instruments 31 6.6 Data

25、 Analysis . 32 6.7 Test Schedule 32 6.8 Data Collection Sheets 32 6.9 Conflict of Interest Declaration . 32 7 Test Requirements 32 7.1 General 32 7.2 Data Acquisition and Instruments 32 7.3 Test Conditions 33 7.4 Measurement Locations 34 8 Test Report . 34 8.1 Test Details 35 8.2 Transducer Placemen

26、t Positions . 35 8.3 Measurement Equipment Details . 35 8.4 Results . 35 8.5 Deviations 35 8.6 Surveyor Witnessing Documentation . 36 9 Results 36 TABLE 1 Summary of Indoor Climate Requirements . 31 SECTION 6 Lighting . 37 1 Background . 37 2 Scope 37 3 Terminology 37 4 Associated Documentation . 38

27、 5 Criteria . 38 5.1 General and Task Lighting . 39 5.2 Red or Low-level White Illuminance . 39 6 Test Plan . 42 6.1 Documentation 42 6.2 Test Personnel 42 6.3 Test Conditions 42 6.4 Measurement Locations 42 6.5 Data Acquisition and Instruments 42 6.6 Data Analysis . 42 6.7 Test Schedule 42 6.8 Data

28、 Collection Sheets 42 6.9 Conflict of Interest Declaration . 42 7 Test Requirements 43 7.1 General 43 7.2 Data Acquisition and Instruments 43 7.3 Test Conditions 43 7.4 Measurement Locations 44 vi ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 8 Test Report . 46 8.1 Test Details . 46

29、 8.2 Measurement Positions . 46 8.3 Measurement Equipment Details 46 8.4 Results 46 8.5 Deviations 46 8.6 Surveyor Witnessing Documentation 46 9 Results 47 TABLE 1 Lighting Criteria for Personnel Accommodation Spaces 39 TABLE 2 Lighting Criteria for Entrances and Passageways 39 TABLE 3 Lighting Crit

30、eria for Navigation and Control Spaces . 40 TABLE 4 Lighting Criteria for Service Spaces 40 TABLE 5 Lighting Criteria for Operating and Maintenance Spaces/Areas 41 TABLE 6 Lighting Criteria for Red or Low-level White Illuminance 41 TABLE 7 Distribution of Measurement Positions within Spaces 45 APPEN

31、DIX 1 References 48 1 General References 48 2 Accommodation Area References 48 3 Whole-body Vibration References 50 4 Noise References . 50 5 Indoor Climate References . 51 6 Lighting References 51 APPENDIX 2 Procedural Requirements for ABS Recognized Ambient Environmental Testing Specialists . 52 1

32、 Terminology 52 2 Objective . 52 3 Application 52 4 Procedure for Approval and Certification 53 4.1 Documentation Requirements . 53 4.2 General Requirements 53 4.3 Auditing of the Testing Specialist 54 4.4 Certification . 54 4.5 Quality Assurance System 54 4.6 Testing Specialist Relations with the T

33、est Equipment Manufacturer . 55 5 Certificate of Approval . 55 5.1 Renewal 55 6 Alterations . 55 7 Cancellation of Approval . 56 ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 vii 8 Detailed Requirements by Ambient Environmental Aspect 56 8.1 Whole-body Vibration 56 8.2 Noise . 57 8.

34、3 Indoor Climate . 59 8.4 Lighting 60 APPENDIX 3 Accommodation Area Criteria . 62 General 63 Access/Egress . 64 Personnel Cabins . 67 Sanitary Spaces . 70 Office 73 Food Service Areas . 74 Recreation 77 Laundry 78 Medical . 79 APPENDIX 4 Acronyms and Abbreviations 80 APPENDIX 5 Associated Documentat

35、ion . 82 viii ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 Section 1: General SECTION 1 General 1 Introduction ABS recognizes the positive impact that suitable habitability criteria and design practices may have on the productivity, morale, overall well-being and safety of personne

36、l. The ABS Guide for Crew Habitability on Offshore Installations has been developed with the objective of improving the quality of personnel performance by improving working and living environments in terms of accommodation area design and ambient environmental qualities. These habitability criteria

37、 have been chosen to provide a means to help reduce personnel fatigue, improve performance and safety, and to assist with personnel recruiting and retention. 2 Application (1 February 2016) This Guide is applicable to new and existing offshore installations for which an optional offshore installatio

38、n Habitability (HAB(OS), offshore installation Habitability Plus (HAB+(OS), or offshore installation Habitability Plus Plus (HAB+(OS) notation has been requested. The habitability criteria are a measure of the acceptability of personnel accommodation areas and work spaces for living and working. In

39、addition to the HAB notation assignment, at the Owners request, ABS may review the accommodation area design for compliance with ILO MLC, 2006 Title 3 requirements, as related to the MLC-ACCOM notation. ABS has produced this Guide for Crew Habitability on Offshore Installations in order to provide a

40、 single source for habitability criteria suitable for offshore installations. This Guide may be applied to installations falling under the categories of tension leg platforms (TLPs), floating production, storage and offloading (FPSOs), floating, storage and offloading (FSOs), spars, fixed platforms,

41、 or any other buoyant or non-buoyant structure supported by or attached to the seafloor. This Guide does not apply to offshore service vessels, dredgers, or mobile offshore drilling units such as self-elevating drilling units (SEDUs), column-stabilized drilling units, or drillships. These types of v

42、essels are covered in other ABS Habitability Guides. 3 Scope This Guide focuses on five (5) habitability aspects of offshore installation design and layout that can be controlled, measured and assessed. These five (5) aspects are broken into two (2) categories in this Guide, personnel accommodation

43、areas and the ambient environment. Accommodation area criteria pertain to dimensional and outfitting aspects of spaces and open deck areas where personnel eat, sleep, recreate and perform routine daily activities. The ambient environmental aspects of habitability pertain to the environment that pers

44、onnel are exposed to during periods of work, leisure and rest. Specifically, this Guide provides criteria, limits and measurement methodologies for the following: i) Whole-body Vibration (separate criteria for personnel accommodation areas and work spaces) ii) Noise iii) Indoor Climate iv) Lighting

45、The criteria provided in this Guide are based on currently available research data and standards for the purpose of improving personnel performance and providing a base level of habitability and elements of safety related to habitability. While producing this Guide, ABS has taken a practical approac

46、h to measurements, test personnel (Testing Specialists) and test equipment. ABSGUIDE FOR CREW HABITABILITY ON OFFSHORE INSTALLATIONS .2016 1 Section 1 General 4 Terminology (1 February 2016) ABS Recognized Ambient Environmental Testing Specialists: Companies providing test or measurement services on

47、 behalf of the Owner of an offshore installation or shipyard for the purposes of meeting any of the ABS offshore installation Habitability (HAB(OS), HAB+(OS), HAB+(OS), notation requirements. Approval of the Testing Specialist for offshore installations may also allow for testing and measurement ser

48、vices for other ABS Habitability, Comfort, and MLC notations. Ambient Environment: Ambient environment refers to the environmental conditions that personnel are exposed to during periods of work, leisure or rest. Specifically, this Guide provides criteria and limits for whole-body vibration, noise,

49、indoor climate and lighting. Associated Documentation: Documents referenced in this Guide that are needed to provide measuring techniques and further guidance. Dynamic Positioning: A system to automatically maintain an installations position and heading by controlling propellers and/or thrusters. Dynamic positioning can maintain a position to a fixed point over the bottom, or in relation to a moving object (such as another vessel). It can also be used to position the installation at a favorable angle towards wind, waves, and current. Fixed Installation: Bottom-founded offshor