BS PD CEN TR 15276-2-2009 Fixed firefighting nsystems — Condensed naerosol extinguishing nsystems nPart 2 Design installation and nmaintenance《固定式消防系统 浓缩气溶胶灭火系统 第2部分 设计、安.pdf

《BS PD CEN TR 15276-2-2009 Fixed firefighting nsystems — Condensed naerosol extinguishing nsystems nPart 2 Design installation and nmaintenance《固定式消防系统 浓缩气溶胶灭火系统 第2部分 设计、安.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TR 15276-2-2009 Fixed firefighting nsystems — Condensed naerosol extinguishing nsystems nPart 2 Design installation and nmaintenance《固定式消防系统 浓缩气溶胶灭火系统 第2部分 设计、安.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、PD CEN/TR 15276-2:2009 ICS 13.220.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW PUBLISHED DOCUMENT Fixed firefighting systems Condensed aerosol extinguishing systems Part 2: Design, installation and maintenanceThis Published Document was published under the authority of t

2、he Standards Policy and Strategy Committee on 30 April 2009. BSI 2009 ISBN 978 0 580 54125 4 Amendments/corrigenda issued since publication Date Comments PD CEN/TR 15276-2:2009 National foreword This Published Document is the UK implementation of CEN/TR 15276-2:2009. The UK participation in its prep

3、aration was entrusted to Technical Committee FSH/18/6, Gaseous extinguishing media and systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are respon

4、sible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.PD CEN/TR 15276-2:2009 TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15276-2 January 2009 ICS 13.220.20 English Version Fixed firefighting systems - Condensed aerosol e

5、xtinguishing systems - Part 2: Design, installation and maintenance Installations fixes de lutte contre lincendie - Systmes dextinction arosol - Partie 2 : Calcul, installation et maintenance Ortsfeste Brandbekmpfungsanlagen - Lschanlagen fr kondensierte Aerosole - Teil 2: Planung, Installation und

6、Instandhaltung This Technical Report was approved by CEN on 9 September 2008. It has been drawn up by the Technical Committee CEN/TC 191. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

7、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: ru

8、e de Stassart, 36 B-1050 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15276-2:2009: EPD CEN/TR 15276-2:2009 CEN/TR 15276-2:2009 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6

9、3 Terms and definitions .7 4 Use and limitations . 10 4.1 General . 10 4.2 Extinguishants 11 4.2.1 General . 11 4.2.2 Extinguishing mechanism . 11 4.3 Potentially explosive atmosphere . 11 4.4 Temperature limitations . 11 5 Safety . 12 5.1 Hazard to personnel . 12 5.2 Safety precautions 12 5.2.1 Gen

10、eral . 12 5.2.2 Normally unoccupied areas . 13 5.2.3 Unoccupiable areas 14 5.2.4 Installers responsibility . 14 5.2.5 Users responsibility 15 5.3 Electrical hazards . 15 5.3.1 General . 15 5.3.2 Electrical earthing . 15 5.3.3 Electrostatic discharge 15 6 System design . 15 6.1 General . 15 6.2 Speci

11、fications, plans and approvals. 16 6.3 Enclosures . 16 6.3.1 Protected enclosure . 16 6.3.2 Openings . 16 6.3.3 Unclosable openings 16 6.3.4 Ventilation and services . 16 6.3.5 Venting requirements . 16 6.4 Design factor requirements . 17 6.5 Design factor adjustment . 18 6.5.1 Effects of altitude 1

12、8 6.5.2 Effects of temperature 18 6.5.3 Effects of ventilation 19 6.5.4 Compensation for Leakage through enclosure openings 19 6.6 Design quantity . 19 6.7 Unit size and quantity of aerosol generators . 19 6.7.1 Aerosol generator size selection 19 6.7.2 Quantity of aerosol generator . 20 6.8 Duratio

13、n of protection 21 6.9 System discharge . 21 6.9.1 Discharge time 21 6.9.2 Extended discharge 21 6.10 Plans 21 PD CEN/TR 15276-2:2009 CEN/TR 15276-2:2009 (E) 3 7 System installation . . 22 7.1 General . 22 7.2 Aerosol generator arrangement . 22 7.3 Operating conditions 23 7.4 Installation recommenda

14、tions . 23 7.5 System operation 23 7.5.1 General . 23 7.5.2 Automatic operation 23 7.5.3 Manual operation . 23 7.5.4 System isolate switch (lock off device) . 23 8 Detection, alarm and control systems 24 8.1 General . 24 8.2 Automatic detection . . 24 8.3 Operating devices . 24 8.3.1 General . 24 8.

15、3.2 Automatic operation 24 8.3.3 Manual operation . 25 8.4 Control equipment . 25 8.4.1 Electric control equipment . 25 8.4.2 Pneumatic control equipment . . 25 8.4.3 Operating alarms and indicators . 25 8.4.4 Time delay device 26 8.4.5 Control and indicating equipment . 26 9 Commissioning and accep

16、tance . 26 9.1 General . 26 9.2 Tests . 27 9.2.1 General . 27 9.2.2 Enclosure check 27 9.2.3 Review of mechanical components . 27 9.2.4 Review of enclosure integrity . 27 9.2.5 Review of electrical components . 28 9.2.6 Preliminary functional tests . 28 9.2.7 System functional operational test 29 9.

17、2.8 Remote monitoring operations (if applicable) 29 9.2.9 Control panel primary power source . 29 9.3 Completion of functional tests . 29 9.4 Completion certificate and documentation 29 10 Inspection . 30 10.1 General . 30 10.2 Inspection . 30 10.2.1 General . 30 10.2.2 Enclosures . 30 11 Maintenanc

18、e . 31 11.1 General . 31 11.2 Users programme of inspection . 31 11.3 Service schedule . 31 12 Training. 31 Annex A (normative) Working documents . 32 A.1 General . 32 A.2 Working documents . . 32 Bibliography 33 PD CEN/TR 15276-2:2009 CEN/TR 15276-2:2009 (E) 4 Foreword This document (CEN/TR 15276-2

19、:2009) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI. This document has the general title Fixed firefighting systems Condensed aerosol extinguishing systems and will consist of the following parts: Part 1: Requirements and t

20、est methods for components; Part 2: Design, installation and maintenance. PD CEN/TR 15276-2:2009 CEN/TR 15276-2:2009 (E) 5 Introduction It has been assumed in the preparation of this document that the execution of its provisions is entrusted to appropriately qualified and experienced people in the s

21、pecification, design, installation, testing, approval, inspection, operation and maintenance of systems and equipment, for whose guidance it has been prepared, and who can be expected to exercise a duty of care to avoid unnecessary release of extinguishant. Product certification: Users of this docum

22、ent are advised to consider the desirability of independent certification of product conformity with this document based on testing and continuing surveillance, which may be coupled with assessment of manufacturer quality systems against EN ISO 9001. Fire-fighting systems covered in this document ar

23、e designed to provide a supply of fixed condensed aerosol extinguishing medium to extinguish fire. The requirements of this document are made in the light of the best technical data known to the working group at the time of writing but, since a wide field is covered, it has been impracticable to con

24、sider every possible factor or circumstance that might affect implementation of the requirements. It is important that the fire protection of a building or plant be considered as a whole. Aerosol extinguishant systems form only a part of the available facilities, but it should not be assumed that th

25、eir adoption necessarily removes the need to consider supplementary measures, such as the provision of portable fire extinguishers or other mobile appliances for first aid or emergency use, or to deal with special hazards. Small scale fire tests, comparable with the test methods mentioned in this st

26、andard, indicate that aerosol extinguishants can be recognized as effective media for the extinction of certain Class A fires (solid surface burning fires) and Class B and Class C fires according to EN 2, but it should not be forgotten, in the planning of comprehensive schemes, that there may be haz

27、ards for which these mediums are not suitable, or that in certain circumstances or situations there may be dangers in their use requiring special precautions. Advice on these matters can be obtained from the appropriate manufacturer of the aerosol generators or the extinguishing system. Information

28、may also be sought from the appropriate fire authority, the health and safety authorities and insurers. In addition, reference should be made as necessary to other national standards and statutory regulations. It is essential that fire-fighting equipment, the enclosure and the protected occupancy is

29、 carefully maintained and managed to ensure instant readiness when required and effectiveness of the protection. Routine maintenance is liable to be overlooked or given insufficient attention by the owner of the system. It is, however, neglected at peril to the lives of occupants of the premises and

30、 at the risk of crippling financial loss. The importance of maintenance cannot be too highly emphasised. Condensed aerosol may contain traces of toxic substances like those produced by a fire, and will obscure vision like smoke from fire. This standard requires, as a precaution, that the room is eva

31、cuated and sealed off whenever a generator is activated - much like recommended response to fires. Precautions include evacuation of the proximity area, criteria for re-entering and other safeguards as stated in paragraph 5. PD CEN/TR 15276-2:2009 CEN/TR 15276-2:2009 (E) 6 1 Scope This document spec

32、ifies requirements and describes the methods for the design, installation, testing, maintenance and safety of condensed aerosol extinguishing systems and the characteristics of the extinguishant media and types of fire for which it is a suitable extinguishing medium. This document also covers the us

33、e of condensed aerosol extinguishing systems for total flooding applications in normally unoccupied and unoccupiable areas, primarily related to buildings, plant and other specific applications, utilising electrically non-conducting aerosol fire extinguishants and for which there are sufficient data

34、 available to enable validation of performance characteristics by an appropriate independent authority. This document is intended as a standard covering solely condensed aerosol. This document is not applicable to explosion suppression applications. This document is not intended to indicate approval

35、 of the extinguishants listed herein by the appropriate authorities, as other extinguishants may be equally acceptable. This document is applicable to the extinguishants which fulfil CEN/TR 15276-1. 2 Normative references The following referenced documents are indispensable for the application of th

36、is document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 54 (all parts), Fire detection and fire alarm systems EN 12094-1, Fixed firefighting systems Components for gas extinguishin

37、g systems Part 1: Requirements and test methods for electrical automatic control and delay devices CEN/TR 15276-1:2009, Fixed firefighting systems Condensed aerosol extinguishing systems Part 1: Requirements and test methods for components EN 50110, Operation of electrical installations PD CEN/TR 15

38、276-2:2009 CEN/TR 15276-2:2009 (E) 7 3 Terms and definitions For the purposes of this document, the terms and definitions given in CEN/TR 15276-1:2009 and the following apply. 3.1 actuating mechanism automatic or manual activation leading to the physical discharge of extinguishant 3.2 approved accep

39、table to a relevant authority 3.3 authority organisation, office or individual responsible for approving equipment, installations or procedures in determining acceptability NOTE The authority may base acceptance on conformity to the appropriate standards. 3.4 automatic performing a function without

40、the necessity of intentional intervention 3.5 automatic/manual switch means of converting the system from automatic to manual actuation NOTE This may be in the form of a manual switch on the control panel or other units, or a personnel door interlock. In all cases, this changes the actuation mode of

41、 the system from automatic and manual to manual only or vice versa. 3.6 clearance 3.6.1 electrical clearance unobstructed air distance between extinguishing system equipment and unenclosed or uninsulated live electrical components not at ground potential 3.6.2 thermal clearance air distance between

42、a condensed aerosol generator and any structure or components sensitive to the temperature developed by the generator 3.7 competent person designated person, suitably trained, qualified by knowledge and practical experience and with the necessary instructions to enable the required tests and examina

43、tions to be carried out 3.8 condensed aerosol extinguishing medium consisting of finely divided solid particles and gaseous matter, these being generated by a combustion process of a solid aerosol-forming compound 3.9 condensed aerosol generator non-pressurised device which, when activated, generate

44、s an aerosol PD CEN/TR 15276-2:2009 CEN/TR 15276-2:2009 (E) 8 NOTE It includes the mounting brackets. 3.10 control device device which is able to control the sequence of events leading to the activation 3.11 coolant heat absorbing medium or process 3.12 design application density (g/m 3 ) extinguish

45、ing factor multiplied by the safety factor, required for system design purposes NOTE 1 The design factor is expressed in grams per cubic metre. NOTE 2 Extinguishing factor and design factor have been introduced as an alternative to extinguishing concentration and design concentration respectively as

46、 concentration of the actual aerosol cannot be measured or even assessed in some cases (the discharged medium, apart from the condensed aerosol, may contain products of the thermal decomposition of a chemical coolant). 3.13 design quantity mass of solid aerosol-forming composition necessary to achie

47、ve the design factor (density) in the maximum protected volume of a specific risk NOTE The design quantity is expressed in grams. 3.14 discharge time time from the generator activation to the end of its discharge 3.15 extinguishing application density the minimum mass of a specific aerosol-forming c

48、ompound per cubic meter of enclosure volume required to extinguish fire involving a specific fuel under defined experimental conditions, using a specific aerosol generator type and size, excluding any safety factor. NOTE The extinguishing factor is expressed in grams per cubic metre. 3.16 family group of generators with same solid compound, same kind of cooling device, same kind of discharge outlet, same ignition device, same layout and same internal/external architecture 3.17 holding time period of time during which the e