BS ISO IEC 29182-7-2015 Information technology Sensor networks Sensor Network Reference Architecture (SNRA) Interoperability guidelines《信息技术 传感器网络 传感器网络参考架构 (SNRA) 互操作性指.pdf

《BS ISO IEC 29182-7-2015 Information technology Sensor networks Sensor Network Reference Architecture (SNRA) Interoperability guidelines《信息技术 传感器网络 传感器网络参考架构 (SNRA) 互操作性指.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 29182-7-2015 Information technology Sensor networks Sensor Network Reference Architecture (SNRA) Interoperability guidelines《信息技术 传感器网络 传感器网络参考架构 (SNRA) 互操作性指.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 29182-7:2015 Information technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 7: Interoperability guidelinesBS ISO/IEC 29182-7:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 29182-7:2015.

2、 The UK participation in its preparation was entrusted to Technical Committee IST/70, Sensor Networks. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are

3、 responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 72481 7 ICS 35.110 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the

4、 Standards Policy and Strategy Committee on 28 February 2015. Amendments/corrigenda issued since publication Date Text affectedInformation technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 7: Interoperability guidelines Technologies de linformation Rseaux de capteurs: Arc

5、hitecture de rfrence pour rseaux de capteurs Partie 7: Lignes directrices pour linteroprabilit INTERNATIONAL STANDARD ISO/IEC 29182-7 Reference number ISO/IEC 29182-7:2015(E) First edition 2015-02-15 ISO/IEC 2015 BS ISO/IEC 29182-7:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT

6、 ISO/IEC 2015 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission ca

7、n be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ISO/IEC 29182-7:2015(E)BS ISO/

8、IEC 29182-7:2015ISO/IEC 29182-7:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erms and definitions . 1 4 Symbols (and abbreviated terms) 1 5 Overview of interoperability between heterogeneous sensor networks 2 5.1 General . 2 5.2 Interoperability in sensor network servic

9、e framework 2 6 Guidelines for interoperability between heterogeneous sensor networks 4 6.1 General . 4 6.2 Interoperability between the user and the service provider (Interface 1) . 5 6.3 Interoperability between the gateway and the service provider (Interface 3) . 5 6.4 Interoperability between th

10、e sensor network and the gateway (Interface 4) . 7 6.5 Interoperability between sensor nodes (Interface 5) . 7 Bibliography 8 ISO/IEC 2015 All rights reserved iiiBS ISO/IEC 29182-7:2015ISO/IEC 29182-7:2015(E) Foreword ISO (the International Organization for Standardization) and IEC (the Internationa

11、l Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of

12、 technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint

13、technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee a

14、re circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not

15、be held responsible for identifying any or all such patent rights. ISO/IEC 29182-7 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology. ISO/IEC 29182 consists of the following parts, under the general title Information technology Sensor networks: Sensor Network Reference

16、Architecture (SNRA): Part 1: General overview and requirements Part 2: Vocabulary and terminology Part 3: Reference architecture views Part 4: Entity models Part 5: Interface definitions Part 6: Applications Part 7: Interoperability guidelinesiv ISO/IEC 2015 All rights reservedBS ISO/IEC 29182-7:201

17、5ISO/IEC 29182-7:2015(E) Introduction A wide range of applications has been proposed for sensor networks. In practice, however, sensor networks have been built and deployed for a relatively small number of applications. This is partly due to the lack of a business case for certain applications and p

18、artly due to technical challenges in building a non-trivial sensor network of reasonable complexity. The main reason for this impediment is multi-disciplinary expertise such as sensors, communications and networking, signal processing, electronics, computing, and cyber security is required to design

19、 a sensor network. Presently, the design process is so complex that one can leverage little from one sensor network design to another. It appears as if one has to start from almost scratch every time one wishes to design and deploy a sensor network. Yet, upon closer inspection, there are many common

20、alities in instantiations of sensor networks that realize various applications. These commonalities include similarities in the choice of network architecture and the entities/functional blocks that are used in the architecture. The purpose of the ISO/IEC 29182 series is to provide guidance to facil

21、itate the design and development of sensor networks, improve interoperability of sensor networks, and make sensor networks plug-and-play, so that it becomes fairly easy to add/remove sensor nodes to/from an existing sensor network. The ISO/IEC 29182 series can be used by sensor network designers, so

22、ftware developers, and service providers to meet customer requirements, including any applicable interoperability requirements. The ISO/IEC 29182 series is comprised of seven parts. Brief descriptions of these parts are given next. ISO/IEC 29182-1 provides a general overview and the requirements for

23、 the sensor network reference architecture. ISO/IEC 29182-2 provides definitions for the terminology and vocabulary used in the reference architecture. ISO/IEC 29182-3 presents the reference architecture from various viewpoints, such as business, operational, system, technical, functional, and logic

24、al views. ISO/IEC 29182-4 categorizes the entities comprising the reference architecture into two classes of physical and functional entities and presents models for the entities. ISO/IEC 29182-5:2013 provides detailed information on the interfaces among various entities in the reference architectur

25、e. ISO/IEC 29182-6 provides detailed information on the development of International Standardized Profiles. ISO/IEC 29182-7 provides design principles for the reference architecture that take the interoperability requirements into account. There are no requirements for compliance in ISO/IEC 29182-1

26、to ISO/IEC 29182-7. Users are to ensure that the sensor nodes and the related sensor network are compliant with the application or deployment governing body. ISO/IEC 2015 All rights reserved vBS ISO/IEC 29182-7:2015BS ISO/IEC 29182-7:2015Information technology Sensor networks: Sensor Network Referen

27、ce Architecture (SNRA) Part 7: Interoperability guidelines 1 Scope This part of ISO/IEC 29182 provides a general overview and guidelines for achieving interoperability between sensor network services and related entities in a heterogeneous sensor network. 2 Normative references The following documen

28、ts, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 29182-1, Information

29、 technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 1: General overview and requirements ISO/IEC 29182-2, Information technology Sensor networks: Sensor Network Reference Architecture (SNRA) Part 2: Vocabulary and terminology ISO/IEC 29182-5:2013, Information technology Se

30、nsor networks: Sensor Network Reference Architecture (SNRA) Part 5: Interface definitions 3 T erms a nd definiti ons For the purposes of this document, the terms and definitions given in ISO/IEC 29182-2 apply. 4 Symbols (and abbreviated terms) This part of ISO/IEC 29182 uses the following abbreviati

31、ons and acronyms. ADSL Asymmetric Digital Subscriber Line API Application Programming Interface GSM Global System for Mobile Communication ICT Information and Communication Technologies SNRA Sensor Network Reference Architecture TCP/IP Transfer Control Protocol/Internet Protocol UWB Ultra Wideband W

32、CDMA Wideband Code Division Multiple Access INTERNATIONAL ST ANDARD ISO/IEC 29182-7:2015(E) ISO/IEC 2015 All rights reserved 1BS ISO/IEC 29182-7:2015ISO/IEC 29182-7:2015(E) 5 Overview of interoperability between heterogeneous sensor networks 5.1 General A sensor network is a system of spatially dist

33、ributed sensor nodes interacting with each other and, depending on applications, with ICT infrastructures, in order to acquire, process, and provide information about the physical world and optionally react to such information ISO/IEC 29182-1. There are many different sensor network applications in

34、a variety of domains such as environment monitoring, logistics management, industrial automation, intelligent highway system, and perimeter protection. From one sensor network service domain to another, significant differences exist in service requirements, service types, processing functions, inter

35、faces, operational attributes, data formats, and so on. These differences influence the interoperability of sensor networks. Due to these differences, a sensor network may be classified into two different types of sensor network, a homogeneous sensor network and a heterogeneous sensor network. The d

36、ifferentiation of the homogeneous and heterogeneous sensor networks can be viewed from sensor type perspective and from communication protocol perspective. From the sensor type perspective, the homogeneous sensor networks can be classified as having the same type or functionally identical sensor nod

37、es while the heterogeneous sensor networks can be classified as having different types or functionally different sensor nodes. From the communication protocol perspective, the homogeneous sensor networks can be classified as having the same or interoperable protocols while the heterogeneous sensor n

38、etworks can be classified as having different or not interoperable types of protocols. In this standard, the communication protocol perspective is used to differentiate the types of sensor networks. The typical difference is the communication protocol. There are various communication protocols for s

39、ensor networks, such as IEEE 802.15.4x series, IETF 6LoWPAN, ZigBee, Bluetooth, and UWB. From the communication protocol perspective, homogeneous sensor networks are by definition interoperable with each other, because they use the same communication protocol between entities of their service domain

40、s. On the other hand, heterogeneous sensor networks are not able to interwork with each other due to the differentiation of the communication protocols they use. Heterogeneity is a common feature of sensor networks, but it may cause various problems. A sensor network application may rely on differen

41、t sub-networks of a heterogeneous sensor network. Therefore, the interoperability between heterogeneous sensor networks is a great challenge in the Sensor Network Reference Architecture (SNRA). 5.2 Interoperability in sensor network service framework From a service-oriented viewpoint, the flow of in

42、formation from sensor nodes to service providers for providing specific sensor network services to users, the overall architecture of sensor network can be represented in the hierarchical architecture. This hierarchical architecture, which is called the sensor network service framework, is illustrat

43、ed in Figure 1. It is the same as Figure 7 in ISO/IEC 29182-5. It has been reproduced in this document for ease of reference.2 ISO/IEC 2015 All rights reservedBS ISO/IEC 29182-7:2015ISO/IEC 29182-7:2015(E) Figure 1 Interfaces and entities of the sensor network service framework There are various com

44、munication protocols or interfaces for each entity in Figure 1. Interoperability implies an internetworking capability between the entities in the sensor network service framework. Figure 2 is a graphical representation of an interoperable sensor network service framework with the arrows representin

45、g the interfaces that enable seamless interoperability between the entities. Figure 2 Graphical representation of an interoperable sensor network service framework Interoperability also needs to exist vertically so that information may be exchanged seamlessly within the hierarchical structure of the

46、 sensor networks supporting a complex system of systems. Therefore, ISO/IEC 2015 All rights reserved 3BS ISO/IEC 29182-7:2015ISO/IEC 29182-7:2015(E) various cases for the interoperability of sensor networks need to be considered. Figure 3 illustrates the complexity of interoperability within this sy

47、stem of systems. Figure 3 Interoperability of sensor network service framework in detail Various entities of the sensor network service framework shown in Figure 3 may use different communication technologies, protocols and data formats. Therefore, data flow between various entities must be interope

48、rable. The advantages of interoperability between heterogeneous sensor networks are: Improving sensor network service scalability Extending sensor network functionality Reusability Potential cost and development/implementation time reduction Interchangeability of components for ease of maintenance a

49、nd upgrade 6 Guidelines for interoperability between heterogeneous sensor networks 6.1 General This clause describes ways of maintaining interoperability within the sensor network service framework. Also, It provides guidelines for interoperability. Interoperability can be achieved by a standard development process that promotes open architectures and a standardization of interfaces between subdivisions (both subsystems and sensor networks), la