Introduction to OptoelectronicsOptical Communication(1).ppt

《Introduction to OptoelectronicsOptical Communication(1).ppt》由会员分享，可在线阅读，更多相关《Introduction to OptoelectronicsOptical Communication(1).ppt（19页珍藏版）》请在麦多课文档分享上搜索。

1、Introduction to Optoelectronics Optical Communication(1),Prof. Katsuaki Sato,Answer to the quiz 1. Can you tell a range of wavelength (in nm) of visible light?,The visible wavelength region is between 380 nm and 780 nm Light whose wavelength is shorter than 380nm is called ultraviolet. Light whose w

2、avelength is longer than 780 nm is called infrared.,Spectrum,ultraviolet,infrared,National Observatory http:/centaurs.mtk.nao.ac.jp/avell/study/SPECTR/node9.html,Answer to the quiz 2. Laser is an abbreviation of a word string. Spell it out.,Light Amplification by Stimulated Emission of Radiation “St

3、imulated emission” antonym of “spontaneous emission” optical transition stimulated by the effect of electric field of light wave on the contrary usually emission occur spontaneously without help of electric field,Answer to the quiz 3. What is the difference between LED and LD?,LED is light emitting

4、diode LD is laser diode Diode is a semiconductor device which has an effect of rectification Both LED and LD are semiconductor diode with a forward bias. Both emit light LED emits light by spontaneous emission mechanism, while LD has an optical cavity which enables multiplication of photon by stimul

5、ated emission,LED and LD,LD (laser diode) works as LED if the operating current does not exceed the threshold value.,Answer to the quiz 4. What is the difference between CD-R and CD-RW?,CD-R is a write-once memory. It uses organic dye which is decomposed by laser irradiation CD-RW is a rewritable me

6、mory It uses phase change for recording and erasing,Answer to the quiz 5. Explain how the light is transmitted through optical fiber.,Light is transmitted along the core by total reflection mechanism at the boundary with the cladding layer,Development of Communication Trend of increase in data carry

7、ing capacity,To meet with the growing need for large capacity information exchange, optical fiber communication system has been developed.,Broadband and Narrow band,Recently we hear the word “broadband”. What does the “broadband” mean? Broadband stands for broad bandwidth in communication path. The

8、band width is defined in the frequency domain, the broader the frequency region for communication the larger is the capacity of information. The broadness of communication path is expressed in terms of bit transfer rate, the unit being bps=bit per second. Analog telephone line with metallic cable ha

9、s a bit rate of 56 kbps, while digital telephone (ISDN=integrated service digital network) line has a rate of 128 kbps. These are called “narrowband” systems. On the contrary, even metallic line can have higher rate by using ADSL (asymmetric digital subscriber line) which has asymmetric data rate of

10、 1.5Mbps to 50 Mbps for downward steam, and 12kbps to 3 Mbps for upward steam. Higher rate is provided only for close area from station. FTTH (fiber to the home) supports 100Mbps for both up and down stream.,Optical fiber is becoming the leading actor of information network,FTTH can transfer as larg

11、e as100Mbit=13MB information per second It means you take only one minute to download information on one CD sheet（640MB）,http:/www.kyoto- distance between Tokyo and Paris is approximately 10,000km. Calculate the time necessary to transfer signal between two cities, assuming the refractive index of f

12、iber as n=1.5. (Light speed in the fiber c can be calculated as c/n) The height from the earth of a communication satellite is about 35,000km. Estimate the delay of signal to go to and fro between the earth and the satellite.,Important components for optical communication,Light source：LD=laser diode

13、 pn junction, DH structure, DFB structure Transmission line: Optical fiber Total reflection, attenuation by Rayleigh scattering and infrared absorption Photo detector: PD=photodiode Amplifier: EDFA=Erbium-doped fiber amplifier Elements: isolator, attenuator, circulator,Component（） Optical Fiber,Mate

14、rial： (fused silica SiO2) Structure: concentric arrangement of core and cladding Transmission: total reflection of light at the boundary between core and cladding,Web site of Kageyama Lab. TIT,http:/ reflection,Transmission loss of optical fiber,Short wavelength: Rayleigh scattering Log wavelength:

15、Infrared absorption Loss peak at 1.4m comes from water vapor,Sato, Koshida：Applied Physics of Electronic Materials（）,wavelength,Photon energy,transmission loss (dB/km),Transmission loss of fiber,Physics Today Online http:/www.aip.org/pt/vol-53/iss-9/captions/p30cap1.html,Attenuation and dispersion i

16、n optical fiber,Attenuation: reduction of light amplitude Dispersion: deterioration of waveform,http:/ the critical angle for core index of 1.5 and cladding index of 1.3. Obtain critical angle for realistic system: core index of 1.4 and cladding index of 1.38 Using a fiber with a loss of 0.2dB/km, calculate an attenuation of light intensity when transmitted between Tokyo and Mt. Fuji. Use 1dB=10log(I0/I) for light intensity,