ISO IEC 29145-2-2014 Information Technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services - Part 2 MAC Lay.pdf

《ISO IEC 29145-2-2014 Information Technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services - Part 2 MAC Lay.pdf》由会员分享，可在线阅读，更多相关《ISO IEC 29145-2-2014 Information Technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services - Part 2 MAC Lay.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、 Edition 1.0 2014-03 ISO/IEC 29145-2 INTERNATIONAL STANDARD Information technology Wireless beacon-enabled energy efficient mesh network (WiBEEM) standard for wireless home network services Part 2: MAC layer ISO/IEC 29145-2:2014-03(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 ISO/IEC,

2、Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee

3、in the country of the requester. If you have any questions about ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11

4、 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies

5、. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting

6、 the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variet

7、y of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on

8、line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International

9、Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications o

10、f IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. ISO/IEC 29145-2 Edition 1.0 2014-03 INTERNATIONAL STANDARD Information technolo

11、gy Wireless beacon-enabled energy efficient mesh network (WiBEEM) standard for wireless home network services Part 2: MAC layer INTERNATIONAL ELECTROTECHNICAL COMMISSION U ICS 35.200 PRICE CODE ISBN 978-2-8322-1449-7 Warning! Make sure that you obtained this publication from an authorized distributo

12、r. 2 ISO/IEC 29145-2 ISO/IEC 2014 CONTENTS FOREWORD . 5 INTRODUCTION . 6 1 Scope 7 2 Normative reference 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 3.3 Conventions . 9 4 Conformance . 10 5 Overview of the WiBEEM technology . 10 6 MAC layer specif

13、ications . 10 6.1 General 10 6.2 MAC layer service specifications 10 6.2.1 Service overview 10 6.2.2 MAC data service . 11 6.2.3 MAC management service 17 6.2.4 Association primitives . 17 6.2.5 Disassociation primitives 22 6.2.6 Beacon notification primitive . 24 6.2.7 Primitives for reading PIB at

14、tributes 27 6.2.8 RAP management primitives . 28 6.2.9 Primitives for orphan notification . 31 6.2.10 Primitives for resetting the MAC layer . 34 6.2.11 Primitives for specifying the receiver enable time . 35 6.2.12 Primitives for channel scanning 37 6.2.13 Communication status primitive 39 6.2.14 P

15、rimitives for writing MAC PIB attributes . 41 6.2.15 Primitives for updating the superframe configuration . 42 6.2.16 Primitives for synchronising with a WRC . 45 6.2.17 Primitives for requesting data from a WRC . 47 6.3 MAC frame formats 49 6.3.1 General 49 6.3.2 General MAC frame format . 50 6.3.3

16、 Beacon frame format 52 6.3.4 MAC command frame format 52 Bibliography 62 Figure 1 MAC layer structure . 11 Figure 2 Message sequence chart describing the MAC data service 16 Figure 3 Message sequence chart for association 22 Figure 4 Message sequence chart for disassociation . 24 Figure 5 Message s

17、equence chart for RAP allocation initiated by a device . 31 Figure 6 Message sequence chart for RAP deallocation initiated by a device and the WMC 31 ISO/IEC 29145-2 ISO/IEC 2014 3 Figure 7 Beacon lost (orphan notification) message sequence chart 33 Figure 8 Message sequence chart for updating the s

18、uperframe configuration . 45 Figure 9 Message sequence chart for synchronising to a WRC in a beacon-enabled WPAN . 47 Figure 10 Message sequence chart for requesting data from the WRC. 49 Figure 11 General MAC frame format . 50 Figure 12 Beacon frame format 52 Table 1 MLDE-DATA.request parameters 12

19、 Table 2 MLDE-DATA.confirm parameters . 13 Table 3 MLDE-DATA.indication parameters . 14 Table 4 MLDE-ERASE.request parameters 15 Table 5 MLDE-ERASE.confirm parameters 16 Table 6 Summary of the primitives accessed through the MLME-SAP 17 Table 7 MLME-ASSOCIATE.request parameters 18 Table 8 MLME-ASSOC

20、IATE.indication parameters 19 Table 9 MLME-ASSOCIATE.response parameters . 20 Table 10 MLME-ASSOCIATE.confirm parameters 21 Table 11 MLME-DISASSOCIATE.request parameters 22 Table 12 MLME-DISASSOCIATE.indication parameters . 23 Table 13 MLME-DISASSOCIATE.confirm parameters 24 Table 14 MLME-BEACON-NOT

21、IFY.indication parameters 25 Table 15 Elements of mesh descriptor . 26 Table 16 MLME-READ-MIB.request parameters . 27 Table 17 MLME-READ-MIB.confirm parameters . 28 Table 18 MLME- RAP-MANAGEMENT.request parameters 29 Table 19 MLME-RAP-MANAGEMENT.confirm parameters . 29 Table 20 MLME-RAP-MANAGEMENT.i

22、ndication parameters 30 Table 21 MLME-BEACON-LOST.indication parameters 32 Table 22 MLME-BEACON-LOST.indication parameters 33 Table 23 MLME-RESET.request parameters 34 Table 24 MLME-RESET.confirm parameters 35 Table 25 MLME-RX-ON.request parameters 35 Table 26 MLME-RX-ON.confirm parameters 36 Table

23、27 MLME-SCAN.request parameters 37 Table 28 MLME-SCAN.confirm parameters 39 Table 29 MLME-COMM-RESULT.indication parameters . 40 Table 30 MLME-WRITE-MIB.request parameters . 41 Table 31 MLME-WRITE-MIB.confirm parameters . 42 Table 32 MLME-START.request parameters 43 Table 33 MLME-START.confirm param

24、eters 44 Table 34 MLME-SYNC.request parameters 45 Table 35 MLME-SYNC-LOSS.indication parameters 46 4 ISO/IEC 29145-2 ISO/IEC 2014 Table 36 MLME-INDIRECT-COMM.request parameters . 48 Table 37 MLME-INDIRECT-COMM.confirm parameters . 48 Table 38 MAC command frame 53 Table 39 Association request command

25、 . 53 Table 41 Association response command 54 Table 42 Association status field 55 Table 43 Disassociation notification command format 55 Table 44 Disassociation reason code . 56 Table 45 Data request command format . 57 Table 46 Mesh ID conflict notification command format 57 Table 47 Orphan notif

26、ication command format . 58 Table 48 Beacon request command format 58 Table 49 Co-ordinator realignment command format 59 Table 50 CFP request command format . 60 Table 51 CFP characteristics field format . 60 Table 52 Rate reconfiguration request format 60 Table 53 Data rate . 61 Table 54 Rate reco

27、nfiguration request command format 61 ISO/IEC 29145-2 ISO/IEC 2014 5 INFORMATION TECHNOLOGY WIRELESS BEACON-ENABLED ENERGY EFFICIENT MESH NETWORK (WIBEEM) STANDARD FOR WIRELESS HOME NETWORK SERVICES Part 2: MAC layer FOREWORD 1) ISO (International Organization for Standardization) and IEC (Internati

28、onal Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards. Their preparation is entrusted to technical committees; any ISO and IEC member body interested in the

29、 subject dealt with may participate in this preparatory work. International governmental and non-governmental organizations liaising with ISO and IEC also participate in this preparation. 2) In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC

30、 1. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. 3) The formal decisions or agreements of IEC and ISO on technica

31、l matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC and ISO member bodies. 4) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and ar

32、e accepted by IEC and ISO member bodies in that sense. While all reasonable efforts are made to ensure that the technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 5

33、) In order to promote international uniformity, IEC and ISO member bodies undertake to apply IEC, ISO and ISO/IEC publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any ISO/IEC publication and the corresponding national or re

34、gional publication should be clearly indicated in the latter. 6) ISO and IEC provide no marking procedure to indicate their approval and cannot be rendered responsible for any equipment declared to be in conformity with an ISO/IEC publication. 7) All users should ensure that they have the latest edi

35、tion of this publication. 8) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts and members of their technical committees and IEC or ISO member bodies for any personal injury, property damage or other damage of any nature whatsoever,

36、whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC publication or any other IEC, ISO or ISO/IEC publications. 9) Attention is drawn to the normative references cited in this publication. Use of the re

37、ferenced publications is indispensable for the correct application of this publication. 10) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such pa

38、tent rights. International Standard ISO/IEC 29145-2 was prepared by subcommittee 25: Interconnection of information technology equipment, of ISO/IEC joint technical committee 1: Information technology. The list of all currently available parts of the ISO/IEC 29145 series, under the general title Inf

39、ormation technology Wireless beacon-enabled energy efficient mesh network (WiBEEM) for wireless home network services, can be found on the IEC web site. This International Standard has been approved by vote of the member bodies, and the voting results may be obtained from the address given on the se

40、cond title page. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 6 ISO/IEC 29145-2 ISO/IEC 2014 INTRODUCTION This International Standard specifies the WiBEEM (Wireless Beacon-enabled Energy Efficient Mesh network) protocol, which provides low-power-consuming mesh

41、 network functions by enabling the “beacon mode operation”. WiBEEM is based on IEEE 802.15.4 standard with additional upper layer protocols and a specific usage of the MAC layer protocol. Through the novel use of beacons, WiBEEM technology achieves longer battery life, larger network support, quicke

42、r response, enhanced mobility and dynamic reconfiguration of the network topology compared with other protocols such as ZigBee. In the beacon mode, Beacon information propagates over the entire mesh network nodes during the BOP (Beacon-Only Period) of the superframe structure without any beacon conf

43、licts by utilising a smart beacon scheduling technique in the BOP. It also provides location information about moving devices without spending extra time running a positioning and locating algorithm by using RSSI (Received Signal Strength Indication). These features allow the WiBEEM protocol to be w

44、idely used for wireless home network services in the ubiquitous network era. One of the key features of the WiBEEM protocol is that it has a special time interval called BOP (Beacon-Only Period) in the superframe structure that allows more than two beacons to be transmitted. This unique time period

45、is located at the beginning of the Superframe. Because the BOP does not use the CSMA/CA mechanism, the network will not work properly in the beacon mode unless an appropriate algorithm is applied. This algorithm needs to manage and control multiple beacons in a single superframe. The solution is the

46、 Beacon Scheduling method applied in the BOP to avoid collisions among beacons, providing synchronisation among all the nodes of the entire mesh network. For the network layer, the NAA (Next Address Available) mechanism, which is a short address allocation algorithm, has been adopted to provide an e

47、fficient way of utilising the complete 16- bit address space. The NAA algorithm does not limit the maximum number of children nodes that a node of a mesh network can have. Since the number of children nodes is unlimited, the NAA mechanism allows the WiBEEM protocol to be used not only for home netwo

48、rk services, but also for community services. WiBEEM can be used where high network expandability through efficient use of short address spaces, device mobility and end-to-end QoS are required. This part of the standard ISO/IEC 29145 specifies the Medium Access Control (MAC) layer of the WiBEEM prot

49、ocol. ISO/IEC 29145-2 ISO/IEC 2014 7 INFORMATION TECHNOLOGY WIRELESS BEACON-ENABLED ENERGY EFFICIENT MESH NETWORK (WIBEEM) STANDARD FOR WIRELESS HOME NETWORK SERVICES Part 2: MAC layer 1 Scope This part of ISO/IEC 29145 specifies the MAC of the WiBEEM (Wireless Beacon-enabled Energy Efficient Mesh network) protocol for wireless home network services that supports a low power-consuming wireless mesh networ