ISO 26430-2-2008 Digital cinema (D-cinema) operations - Part 2 Digital certificate《数字电影院(D-cinema)指令操作码 第2部分 数字鉴定》.pdf

《ISO 26430-2-2008 Digital cinema (D-cinema) operations - Part 2 Digital certificate《数字电影院(D-cinema)指令操作码 第2部分 数字鉴定》.pdf》由会员分享，可在线阅读，更多相关《ISO 26430-2-2008 Digital cinema (D-cinema) operations - Part 2 Digital certificate《数字电影院(D-cinema)指令操作码 第2部分 数字鉴定》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference number ISO 26430-2:2008(E) ISO 2008INTERNATIONAL STANDARD ISO 26430-2 First edition 2008-09-01 Digital cinema (D-cinema) operations Part 2: Digital certificate Oprations du cinma numrique (cinma D) Partie 2: Certificat numrique ISO 26430-2:2008(E) PDF disclaimer This PDF file may contain

2、embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility

3、 of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation paramet

4、ers were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2008 All right

5、s reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the

6、requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2008 All rights reservedISO 26430-2:2008(E) ISO 2008 All rights reserved iii Foreword ISO (the International Organiza

7、tion for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established

8、has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. In

9、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publi

10、cation as an International Standard requires approval by at least 75 % of the member bodies casting a vote. ISO 26430-2 was prepared by the Society of Motion Picture and Television Engineers (as SMPTE 430-2-2006) and was adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC

11、36, Cinematography, in parallel with its approval by the ISO member bodies. ISO 26430 consists of the following parts, under the general title Digital cinema (D-cinema) operations: Part 1: Key delivery message Part 2: Digital certificate Part 3: Generic extra-theater message format ISO 26430-2:2008(

12、E) iv ISO 2008 All rights reservedIntroduction The International Organization for Standardization (ISO) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent. ISO takes no position concerning the evidence, validity and scope of this patent

13、right. The holder of this patent right has assured ISO that he is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO. Information may

14、 be obtained from: Eastman Kodak Company Intellectual Property Transactions 343 State Street Rochester, NY 14650 USA Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO shall not be held responsib

15、le for identifying any or all such patent rights. ISO 26430-2:2008(E) ISO 2008 All rights reserved 1Table of Contents Page 1 Scope 3 2 Normative References 3 3 Glossary 3 4 Overview of Digital Certificates (Informative) 4 5 Certificate Fields . 5 5.1 Required Fields. 5 5.2 Field Constraints. 6 5.3 N

16、aming and Roles 6 5.3.1 Public Key Thumbprint (DnQualifier) . 7 5.3.2 Root Name (OrganizationName) . 7 5.3.3 Organization Name (OrganizationUnitName) 8 5.3.4 Entity Name and Roles (CommonName) 8 5.4 Certificate and Public Key Thumbprint . 8 6 Certificate Processing Rules. 8 6.1 Validation Context. 9

17、 6.2 Validation Rules 9 6.3 Human Verification (Informative) 11 Annex A CommonName Role Descriptions (Informative). 12 Annex B Design Features and Validation Context Considerations (Informative) . 14 Annex C Bibliography (Informative) 16 Annex D Example D-Certificate (Informative). 17 Page 1 of 21 p

18、ages SMPTE 430-2-2006 SMPTE STANDARD D-Cinema Operations Digital Certificate Copyright 2006 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue, White Plains, NY 10601 (914) 761-1100 Approved October 3, 2006 ISO 26430-2:2008(E) 2 ISO 2008 All rights reservedSMPTE 430-2-2006 Pag

19、e 2 of 21 pages Foreword SMPTE (the Society of Motion Picture and Television Engineers) is an internationally recognized standards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTEs Engineering Doc

20、uments, including Standards, Recommended Practices and Engineering Guidelines, are prepared by SMPTEs Technology Committees. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO

21、, IEC and ITU. SMPTE Engineering Documents are drafted in accordance with the rules given in Part XIII of its Administrative Practices. SMPTE Standard 430-2 was prepared by Technology Committee DC28. Introduction This standard presents a specification for Digital Certificates used in a D-Cinema syst

22、em. These certificates are used to help secure communications both within an exhibition facility and between business entities (Studios, Distributors and Exhibitors). This standard defines the Digital Certificate format and associated processing rules in sufficient detail to enable vendors to develo

23、p and rollout interoperable security solutions for D-Cinema. This Digital Certificate standard is based on a constrained form of the X.509v3 format and processing rules. X.509v3 certificates have been widely used in other well-respected security standards such as SSL/TLS secure internet access, IPSe

24、c Virtual Private Networks and S/MIME secure email. The specific constraints on the X.509v3 format are chosen to reduce the amount of time and implementation effort required to achieve interoperability with high security and yet provide a robust flexible foundation that can support future enhancemen

25、ts. These certificates support a simple yet flexible trust model without having to introduce new business entities. Specifically, there is no need to create an industry wide certification lab, though one could be supported. These certificates are used in several D-Cinema standards. They are used to

26、provide authenticity and integrity for Composition Play Lists CPL and Packing Lists PL. They provide authenticity, integrity and confidentiality in Extra-Theatre Messages ETM such as the Key Delivery Message KDM, and they are used with the TLS session security protocol to protect Intra-Theater Messa

27、ges. NOTE The brackets convention “” as used herein denotes either a normative or informative reference. ISO 26430-2:2008(E) ISO 2008 All rights reserved 3 SMPTE 430-2-2006 Page 3 of 21 pages 1 Scope This standard presents a specification for Digital Certificates for use in D-Cinema systems. The sta

28、ndard defines the Digital Certificate format and associated processing rules in sufficient detail to enable vendors to develop and implement interoperable security solutions. In the D-Cinema environment, certificates have these primary applications: Establishing identity of security devices Supporti

29、ng secure communications at the network layer (e.g. TLS) or application-messaging layer (e.g., Extra Theater Messages ETM) Authentication and integrity requirements for Composition Play Lists (CPL) and Packing Lists (PL) The Digital Certificate standard is based on a constrained form of the X.509v3

30、X.509 format and processing rules. Only the most widely supported features of X.509v3 are used in order to give vendors a large selection of X.509v3 development toolkits and certificate issuing products. The constraints also avoid the complexity and ambiguity that often occurs in systems that use X.

31、509v3 certificates. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based o

32、n this standard are encouraged to investigate the possibility of applying the most recent edition of the standards indicated below. ASN.1 ISO/IEC 8824-1:2002 (ITU-T X.680, Information Technology) - Abstract Syntax Notation One (ASN.1). See: http:/www.iso.org/iso/en/CatalogueDetailPage.CatalogueDetai

33、l?CSNUMBER=35684 Base64 MIME (Multipurpose Internet Mail Extensions) Part One: Mechanisms for Specifying and Describing the Format of Internet Message Bodies. See: http:/www.ietf.org/rfc/rfc1521.txt FIPS-180-2 “Secure Hash Standard” Version 2. August 1, 2002. FIPS-180-2. http:/csrc.nist.gov/publicat

34、ions/fips/fips180-2/fips180-2.pdf PKCS1 “PKCS #1: RSA Encryption Version 2.1” By B. Kaliski. February 2003. IETF RFC 3447 See: http:/www.ietf.org/rfc/rfc3447.txt RFC4055 “Additional Algorithms and Identifiers for RSA Cryptography for Use in the Internet X.509 Public Key Infrastructure” by J. Schaad,

35、 B. Kaliski, R. Housley, June 2005. See: http:/www.ietf.org/rfc/rfc4055.txt RFC3280 “Internet X.509 Public Key Infrastructure Certificate and CRL Profile” by R. Housley, W. Ford, W. Polk, D. Solo, April 2002. See: http:/www.ietf.org/rfc/rfc3280.txt Time UTC, RFC 3339: Date and Time on the Internet:

36、Timestamps. G. Klyne and C. Newman. Informational, July 2002. See: http:/ietf.org/rfc/rfc3339.txt X.509 ITU-T Recommendation X.509 (1997 E): Information Technology - Open Systems Interconnection The Directory: Authentication Framework, June 1997. See: http:/www.itu.int/ITU-T/asn1/database/itu- t/x/x

37、509/1997/ 3 Glossary The following paragraphs define the acronyms used in this standard. ISO 26430-2:2008(E) 4 ISO 2008 All rights reservedSMPTE 430-2-2006 Page 4 of 21 pages ASN.1: Abstract Syntax Notation 1. BER: Basic Encoding Rules for ASN.1 structures. There are multiple BER encodings for a giv

38、en value. Base64: A printable encoding of binary data. Defined in Base64. CA: Certificate (issuing) Authority DC: Digital Cinema. DER: Distinguished Encoding Rules for ASN.1 structures. These rules create a canonical representation. ETM: Extra Theatre Message. FIPS: Federal Information Processing St

39、andards of NIST. IETF: Internet Engineering Task Force standards group. IP: Internet Protocol. An IETF standard. ISO: International Standards Organization. LE: Link Encryptor. LD: Link Decryptor. MD: Media Decryptor. NIST: National Institute of Standards and Technologies. RO: Rights Owner. RSA: Rive

40、st Shamir Adleman public key algorithm. SE: Security Entity. Any Digital Cinema entity that performs cryptography. SHA-1: Secure Hash Algorithm revision 1. See FIPS-180-2. SHA-256: Secure Hash Algorithm. See FIPS-180-2. SM: Security Manager. S/MIME: Secure Multipurpose Internet Mail Extensions. SPB:

41、 Secure Processing Block. SSL: Secure Socket Layer protocol. See TLS. TCP: Transmission Control Protocol. IETF standard for reliable bi-directional streams. TLS: Transport Layer Security protocol. See Rescorla. TMS: Theatre Management System. X.509: A widely used and supported digital certificate st

42、andard. XML: Extensible Mark-up Language. 4 Overview of Digital Certificates (Informative) Digital certificates provide a way for a D-Cinema device to start with a small amount of trustworthy information and use that to verify the trustworthiness of additional information. Certificates also support

43、the privacy, integrity and authenticity of communications. The certificate for a security device is a statement signed by the vendor of the device saying “If you speak to an entity that can prove that it has current access to the private key that matches the public key in this certificate, then I, t

44、he vendor of the device, state that the entity has the following attributes.” The body of the certificate lists attributes such as the make, model and serial number of the device, and the D-Cinema roles supported by the device. For reasons of scaling and security, equipment vendors need not directly

45、 sign the certificates of devices. Instead there may be one or more intermediate certificates in a chain. The vendors primary certificate is the “root” of this chain (called the root certificate), and the devices certificate is the “leaf-end” of the chain. The ISO 26430-2:2008(E) ISO 2008 All rights

46、 reserved 5 SMPTE 430-2-2006 Page 5 of 21 pages public key in the vendors root certificate (which is self-signed) may be used to verify the attributes in an intermediate certificate. Those attributes include the public key of the intermediate Certificate issuing Authority (CA), which is then used to

47、 verify the next certificate in the chain, and so forth. Eventually, the public key from the last CA certificate in the chain is used to verify the devices certificate, and thus establish the trustworthiness of the attributes in the certificate (including the devices public key). Devices that perfor

48、m certificate chain validation assume that the vendor has established good policies and procedures for securely operating the CAs in the chain, which should make it unlikely that an attacker will be able to create fraudulent certificates. The name of the organization that owns the root certificate a

49、ppears in all the certificates in the chain and this serves as an indication of the quality of the policies and procedures. 5 Certificate Fields D-Cinema certificates shall use the standard X.509 (version 3) (see X.509) format in constrained ways defined in this standard in order to reduce the complexity and ambiguity that often occurs in systems that used X.509 certificates. This section defines those constraints. 5.1 Required Fields This section specifies the re