IEC 62289-2002 Video recording - Helical-scan digital video cassette recording format using 12 65 mm magnetic tape and incorporating MPEG-2 compression - Format.pdf

《IEC 62289-2002 Video recording - Helical-scan digital video cassette recording format using 12 65 mm magnetic tape and incorporating MPEG-2 compression - Format.pdf》由会员分享，可在线阅读，更多相关《IEC 62289-2002 Video recording - Helical-scan digital video cassette recording format using 12 65 mm magnetic tape and incorporating MPEG-2 compression - Format.pdf（108页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL STANDARD IEC 62289 First edition 2002-07 Video recording Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression Format D-10 Reference number IEC 62289:2002(E)Publication numbering As from 1 January 1997 all IEC publication

2、s are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the bas

3、e publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relat

4、ing to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this pu

5、blication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/catlg-e.htm) enables you to search by a variety of criteria including text searches, technical co

6、mmittees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/JP.htm) is also available by email. Please contact the Cust

7、omer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00INTERNATIONAL STANDARD IEC 62

8、289 First edition 2002-07 Video recording Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression Format D-10 IEC 2002 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,

9、 electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: w

10、ww.iec.ch XA For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission 2 62289 IEC:2002(E) CONTENTS FOREWORD 5 1 Scope 6 2 Normative references. 6 3 Abbreviations and acronyms 7 4 Environment and test conditions 7 4.1 Calibration

11、 tape 7 4.2 Record locations and dimensions . 7 5 Tape and cassette physical specifications 7 5.1 Magnetic tape specifications. 7 5.2 Cassette specifications. 8 6 Tape record physical parameters28 6.1 Tape speed .28 6.2 Helical record physical parameters 28 6.3 Longitudinal record physical parameter

12、s28 7 Longitudinal track signal and magnetic parameters.31 7.1 Longitudinal track record parameters.31 7.2 Control track record parameters 32 7.3 Time and control code record parameters32 8 Helical track signal parameters and magnetization34 8.1 General .34 8.2 Helical track data parameters 35 8.3 S

13、crambling and channel coding .47 8.4 Magnetization 48 8.5 Data arrangement in video sectors 49 8.6 Data arrangement in audio data sectors 63 Annex A (normative) Video shuffling tables 69 Annex B (normative) Digital interfaces .89 B.1 Introduction .89 B.2 Video interface 89 B.3 Audio interface 89 B.4

14、 Serial data interface 90 Annex C (informative) Tape transport and scanner.91 Annex D (informative) Compatibility with the other digital formats using type-L derivative cassettes 94 Annex E (informative) Compatibility with analog Type-L .95 Annex F (normative) SMPTE 356M, “D-10 Type Stream Specifica

15、tions: MPEG-2 4:2:2PML for 525/60 and 625/50” 96 F.1 Scope96 F.2 Specification of the D-10 type MPEG-2 4:2:2PML elementary stream.96 F.3 Interfaces 98 F.4 D-10 type ES Stream operating points .98 F.5 D-10 recording format compression model.99 F.6 D-10 recording format digital interfaces .100 Annex G

16、 (informative) D-10 document reference tree10162289 IEC:2002(E) 3 Figure 1 Top and side view (S-cassette).10 Figure 2 Bottom view (S-cassette)11 Figure 3 Datum areas, supporting areas, tape guides and associated dimensions (S-cassette) 13 Figure 4 Reel location in the unlocked position (S-cassette).

17、13 Figure 5 Protecting lid dimensions (S-cassette)14 Figure 6 Reel dimensions (S-cassette).15 Figure 7 Reel height in the unlocked position (S-cassette) .15 Figure 8 Unlocking lever insertion area (S-cassette) 16 Figure 9 Lid unlocking force (S-cassette) .17 Figure 10 Lid opening force (S-cassette)1

18、7 Figure 11 Reelspring force (S-cassette) .18 Figure 12 Safety plug strength (S-cassette)18 Figure 13 Extraction force (F1, F2) and friction torque (S-cassette)19 Figure 14 Top and side view (L-cassette).19 Figure 15 Bottom view (L-cassette) 20 Figure 16 Datum areas, supporting areas and tape guides

19、 (L-cassette)22 Figure 17 Reel location in unlocked position (L-cassette) .22 Figure 18 Protecting lid (L-cassette).23 Figure 19 Reel dimensions (L-cassette) .24 Figure 20 Reel height in unlocked operation (L-cassette) .24 Figure 21 Unlocking lever insertion area (L-cassette).25 Figure 22 Lid unlock

20、ing force (L-cassette)26 Figure 23 Lid opening force (L-cassette) 26 Figure 24 Reel spring force (L- cassette)26 Figure 25 Safety plug strength (L-cassette)27 Figure 26 Extraction force (F1, F2) and friction torque (L-cassette) 27 Figure 27 Locations and dimensions of recorded tracks .30 Figure 28 L

21、ocations and dimensions of tolerance zones of helical track records.31 Figure 29 Recorded control code waveform for the 525/60 system .33 Figure 30 Recorded control code waveform for the 625/50 system .33 Figure 31 Helical recording block diagram34 Figure 32 Helical playback block diagram.35 Figure

22、33 Sector arrangement on a helical track 36 Figure 34 Sector arrangement on a helical track (525/60 system).37 Figure 35 Sector arrangement on a helical track (625/50 system).38 Figure 36 Video sync block format39 Figure 37 Audio sync block format (525/60 system)39 Figure 38 Audio sync block format

23、(625/50 system)39 Figure 39 Sync block identification bytes40 Figure 40 ID 0 : sync block number (525/60 system) 41 Figure 41 ID0: sync block number (625/50 system) 42 Figure 42 Track, segment and frame/field counts .45 4 62289 IEC:2002(E) Figure 43 Re-ordering of coefficient data50 Figure 44 Length

24、 information for video data .53 Figure 45 Example of packing 10 slices into 10 sync blocks.55 Figure 46 Video AUX sync block 57 Figure 47 Block interleave (525/60 system)58 Figure 48 Block interleave (625/50 system)58 Figure 49 Video outer ECC (525/60 system).60 Figure 50 Video outer ECC (625/50 sys

25、tem).62 Figure 51 Audio video timing63 Figure 52 Audio data word assignment.64 Figure 53 Audio auxiliary data words65 Figure 54 Audio data block layout (525/60 system) 66 Figure 55 Audio data block layout (625/50 system) 67 Figure 56 Sync block shuffling67 Figure 57 Channel sector shuffling.68 Figur

26、e C.1 Possible scanner configuration (525/60 and 625/50 systems) .92 Figure C.2 Possible longitudinal head location and tape wrap (525/60 and 625/50 systems) .93 Figure F.3 Digital recorder compression model.99 Figure G.1 D-10 document reference tree 101 Table 1 Record location and dimensions for th

27、e 525/60 and 625/50 systems .29 Table 2 ID 0 : sync block number .43 Table A.1 Shuffling pattern (525/60 system).69 Table A.2 Shuffling pattern (625/50 system).78 Table C.1 Parameters for a possible scanner design91 Table C.2 Data rate and wavelength.91 Table F.1 Basic bit stream constraints96 Table

28、 F.2 Operating points.9962289 IEC:2002(E) 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ VIDEO RECORDING HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING FORMAT USING 12,65 MM MAGNETIC TAPE AND INCORPORATING MPEG-2 COMPRESSION FORMAT D-10 FOREWORD 1) The IEC (International Electrotechnical Commission) i

29、s a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in additio

30、n to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising

31、with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters exp

32、ress, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of sta

33、ndards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their

34、 national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to b

35、e in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62289 has

36、been prepared by IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on the following documents: CDV Report on voting 100/416A/CDV 100/481/RVC Full information on the voting for the approval of this standard can be found in the report on

37、 voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. The committee has decided that the contents of this publication will remain unchanged until 2007. At this date, the publication will be reconfirmed; withdrawn; replaced by a rev

38、ised edition, or amended. 6 62289 IEC:2002(E) VIDEO RECORDING HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING FORMAT USING 12,65 MM MAGNETIC TAPE AND INCORPORATING MPEG-2 COMPRESSION FORMAT D-10 1 Scope This standard specifies the formatting for the recording of data blocks containing MPEG-2 compresse

39、d video, multiple channels of AES3 audio and associated data which form helical records on 12,65 mm tape in cassettes. This standard also defines the helical track record parameters, the content and format of the longitudinal records and the cassette physical specifications. The compressed video use

40、s the MPEG-2 compression which is defined by ISO/IEC 13818-2 with constraints as defined by Annex F. The compressed video channel supports frame frequencies of 30/1,001 Hz (hereafter referred to as 525/60 system) and 25 Hz (hereafter referred to as 625/50 system). 2 Normative references The followin

41、g referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61213:1993, Analogue audio recording on video tape Polari

42、ty of magnetization IEC 61237-1:1994, Broadcast video tape recorders Methods of measurement Part 1: Mechanical measurements ISO/IEC 13818-2:2001, Information technology Generic coding of moving pictures and associated audio information: Video ITU-R BT.601-5, Studio encoding parameters of digital tel

43、evision for standard 4:3 and wide- screen 16:9 aspect ratios SMPTE 12M:1999, Time and Control Code SMPTE 259M:1997, 10-Bit 4:2:2 Component and 4 f scNTSC Composite Digital Signals Serial Digital Interface SMPTE 305M, Television - Serial Data Transport Interface SMPTE 326M, SDTI Content Package Forma

44、t (SDTI-CP) SMPTE 328M, MPEG-2 Video Elementary Stream Editing Information SMPTE 331M, Element and Metadata Definitions for the SDTI-CP SMPTE RP 204, SDTI-CP MPEG Decoder Templates AES3-1992, Serial transmission format for two-channel linearly represented digital audio data62289 IEC:2002(E) 7 3 Abbr

45、eviations and acronyms For the purposes of this standard, the following abbreviations and acronyms apply. AUX: Auxiliary CH: Channel DCT: Discrete cosine transform ECC: Error correcting code EOB: End of block I-NRZI: Interleaved non return to zero inverted MUX Multiplex SYNC: Synchronization VLC: Va

46、riable length coding 4 Environment and test conditions Tests and measurements made on the system to check the requirements of this standard shall be carried out under the following conditions: temperature: 20 C 1 C; relative humidity: 50 % 2 %; barometric pressure: from 86 kPa to 106 kPa; tape tensi

47、on: 0,3 N 0,05 N; tape conditioning: not less than 24 h. 4.1 Calibration tape Calibration tapes meeting the tolerances specified below should be made available by manufacturers of digital television tape recorders and players in accordance with this standard. 4.2 Record locations and dimensions Geom

48、etrical location and dimensions of the recordings on the tape and their relative positions in regard to timing relations of the recorded signals shall be as specified in Figure 27 and Table 1. Tolerances shown in Table 1 should, however, be reduced by 50 % for calibration tapes. 5 Tape and cassette physical specifications 5.1 Magnetic tape specifications 5.1.1 Base The base material shall be polyester or equivalent. 5.1.2 Tape width and width fluctuation The tape width shall be 12,650 mm 0,01 mm. Tape width fluctuation shall not exceed 6 m peak to peak. The value of tape width fluct