IEC 61988-2-1-2012 Plasma Display Panels - Part 2-1 Measuring methods - Optical and optoelectrical《等离子体显示板.第2-1部分 光学和光电学测量方法》.pdf

《IEC 61988-2-1-2012 Plasma Display Panels - Part 2-1 Measuring methods - Optical and optoelectrical《等离子体显示板.第2-1部分 光学和光电学测量方法》.pdf》由会员分享，可在线阅读，更多相关《IEC 61988-2-1-2012 Plasma Display Panels - Part 2-1 Measuring methods - Optical and optoelectrical《等离子体显示板.第2-1部分 光学和光电学测量方法》.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61988-2-1 Edition 2.0 2012-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Plasma display panels Part 2-1: Measuring methods Optical and optoelectrical Panneaux daffichage plasma Partie 2-1: Mthodes de mesure Mesures optiques et opto-lectriques IEC61988-2-1:2012 THIS PUBLICATION IS COPYRIGHT PRO

2、TECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs

3、 member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduc

4、tion rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du de

5、mandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax

6、: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publicati

7、ons The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC

8、publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publication

9、s released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known

10、 as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique

11、 Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vo

12、us assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtude

13、s,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois

14、par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulai

15、re Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61988-2-1 Edition 2.0 2012-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Plasma disp

16、lay panels Part 2-1: Measuring methods Optical and optoelectrical Panneaux daffichage plasma Partie 2-1: Mthodes de mesure Mesures optiques et opto-lectriques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE V ICS 31.260 PRICE CODE CODE PRIX ISBN 978-2-88912-892-1

17、 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un di

18、stributeur agr. 2 61988-2-1 IEC:2012 CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Structure of measuring equipment 7 5 Standard measuring conditions . 7 5.1 Environmental conditions 7 5.2 Set-up conditions 7 5.2.1 General . 7 5.2.2 Measuring layout . 8 5

19、.2.3 Field frequency 8 5.2.4 Adjustment of PDP modules 9 5.2.5 Warm-up condition of PDP modules 9 5.3 Lighting conditions 9 5.3.1 Dark-room conditions 9 5.3.2 Bright-room conditions . 9 6 Measuring methods 11 6.1 Measuring methods of 4 % window luminance . 11 6.1.1 Purpose . 11 6.1.2 Measuring equip

20、ment 11 6.1.3 Measurement. 11 6.2 Measuring method of luminance uniformity 12 6.2.1 Purpose . 12 6.2.2 Measuring equipment 12 6.2.3 Measurement. 12 6.3 Measuring method of dark-room contrast ratio . 13 6.3.1 Purpose . 13 6.3.2 Measuring equipment 13 6.3.3 Measurement. 14 6.4 Measuring method of brig

21、ht-room contrast ratio 100/70 . 15 6.4.1 General . 15 6.4.2 Purpose . 15 6.4.3 Measuring equipment 15 6.4.4 Measurement. 15 6.5 Measuring method of white chromaticity and chromatic uniformity . 16 6.5.1 Purpose . 16 6.5.2 Measuring equipment 16 6.5.3 Measurement. 16 6.6 Measuring method of colour ga

22、mut 17 6.6.1 Purpose . 17 6.6.2 Measuring equipment 17 6.6.3 Measurement. 17 6.7 Measuring method of module power and current consumption . 18 6.7.1 Purpose . 18 6.7.2 Measuring equipment 18 6.7.3 Measurement. 19 61988-2-1 IEC:2012 3 6.8 Measuring method of module power consumption using video signa

23、l . 21 6.8.1 General . 21 6.8.2 Measuring equipment 21 6.8.3 Applied digital video signal 21 6.8.4 Image processing board 21 6.8.5 Measurement. 22 6.9 Measuring method of module luminous efficacy . 23 6.9.1 Purpose . 23 6.9.2 Measuring equipment 23 6.9.3 Measurement. 23 6.10 Measuring method of pane

24、l luminous efficacy . 24 6.10.1 Purpose . 24 6.10.2 Measuring equipment 24 6.10.3 Panel conditions 25 6.10.4 Driving waveform . 26 6.10.5 Applied display patterns 27 6.10.6 Measurement. 27 Annex A (informative) Clause cross-references from the previous edition of IEC 61988-2-1:2002 and IEC 61988-2-2

25、:2003 to IEC 61988-2-1:2011. 31 Bibliography 33 Figure 1 Measuring layout (side view) 8 Figure 2 Example of bright-room conditions . 10 Figure 3 4 % window luminance measuring pattern 11 Figure 4 Measuring points 13 Figure 5 Minimum luminance measuring pattern 15 Figure 6 Example of the colour gamut

26、 measurement 18 Figure 7 Example of power and current measuring diagram . 19 Figure 8 System diagram of sustain power measurement . 25 Figure 9 Driving system and waveform . 27 Table 1 Example of luminance uniformity measurement . 13 Table 2 Example of chromaticity measurement 17 Table 3 Example of

27、power and current measurements (for a module that includes an AC input) 20 Table 4 Example of power and current measurement (for a module with DC inputs only) . 20 Table 5 Example of measurement results of module power consumption using video signal 22 Table A.1 Clause cross-references . 32 4 61988-

28、2-1 IEC:2012 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PLASMA DISPLAY PANELS Part 2-1: Measuring methods Optical and optoelectrical FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (I

29、EC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports

30、, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-

31、governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of

32、IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are ac

33、cepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote internat

34、ional uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the

35、latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users s

36、hould ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other d

37、amage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use

38、of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent ri

39、ghts. International Standard IEC 61988-2-1 has been prepared by IEC technical committee 110: Electronic display devices. This second edition cancels and replaces the first edition published in 2002. This edition constitutes a technical revision. This edition includes the following significant techni

40、cal changes with respect to the previous edition: The first edition of IEC 61988-2-1 and IEC 61988-2-2 were combined and reconstructed in this document. 61988-2-1 IEC:2012 5 The text of this standard is based on the following documents: FDIS Report on voting 110/337/FDIS 110/352/RVD Full information

41、 on the voting for the approval on this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 61988 series, under the general title Plasma display panels, can

42、 be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed,

43、 withdrawn, replaced by a revised edition, or amended. 6 61988-2-1 IEC:2012 PLASMA DISPLAY PANELS Part 2-1: Measuring methods Optical and optoelectrical 1 Scope This part of IEC 61988 determines the following measuring methods for characterizing the performance of plasma display modules (PDP modules

44、): a) four per cent (4 %) window luminance; b) luminance uniformity; c) dark-room contrast ratio; d) bright-room contrast ratio 100/70; e) white chromaticity and chromatic uniformity; f) colour gamut in the centre box; g) module power and current consumption; h) module power consumption using video

45、signal; i) module luminous efficacy, and j) panel luminous efficacy. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated reference

46、s, the latest edition of the referenced document (including any amendments) applies. IEC 60068-1, Environmental Testing Part 1: General and guidance IEC 60107-1, Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations Measurements at radio and video

47、frequencies IEC 61988-1, Plasma display panels Part 1: Terminology and letter symbols IEC 62087, Methods of measurement for the power consumption of audio, video and related equipment CIE 15:2004, Colorimetry 3 Terms and definitions For the purposes of this document, the terms and definitions given

48、in IEC 61988-1, IEC 60068-1, and IEC 60107-1, as well as the following, apply. 61988-2-1 IEC:2012 7 3.1 4 % window panel luminous efficacy p0,04panel luminous efficacy measured by displaying the patterns of 4 % white window and full screen black NOTE Ohmic loss is smaller than that of full screen pa

49、nel luminous efficacy (see 3.4). 3.2 full screen panel luminous efficacy p,fspanel luminous efficacy measured by displaying the patterns of full screen white and full screen black NOTE Ohmic loss is larger than that of 4 % window panel luminous efficacy (see 3.4). 3.3 panel checker system used to drive and test plasma display panel NOTE Panel checker includes the same or the equivalent ele