UL 62275-2010 UL Standard for Safety Cable Management Systems - Cable Ties for Electrical Installations (First Edition Reprint with Revisions Through and Including October 10 2014).pdf

《UL 62275-2010 UL Standard for Safety Cable Management Systems - Cable Ties for Electrical Installations (First Edition Reprint with Revisions Through and Including October 10 2014).pdf》由会员分享，可在线阅读，更多相关《UL 62275-2010 UL Standard for Safety Cable Management Systems - Cable Ties for Electrical Installations (First Edition Reprint with Revisions Through and Including October 10 2014).pdf（82页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 62275 Cable Management Systems Cable Ties for Electrical InstallationsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED

2、 MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Cable Management Systems Cable Ties For Electrical Installations, UL 62275 First Edition, Dated February 26, 2010 Summary of Topics This revision of ANSI/UL 62275 is being issued t

3、o reaffirm approval as an American National Standard. No changes to the requirements have been made. As noted in the Commitment for Amendments statement located on the back side of the title page, UL, CSA, and ANCE are committed to updating this harmonized standard jointly. However, the revision pag

4、es dated October 10, 2014 will not be jointly issued by UL, CSA, and ANCE as these revision pages only address UL ANSI approval date information. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. The revisions are s

5、ubstantially in accordance with Proposal(s) on this subject dated August 15, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior per

6、mission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar da

7、mages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exce

8、ed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resu

9、lting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective d

10、ates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. OCTOBER 10, 2014 UL 62275 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU

11、CTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL OCTOBER 10, 2014 UL 62275 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-623-ANCE First Edition CSA Group CAN/CSA-

12、C22.2 No. 62275-10 First Edition Underwriters Laboratories Inc. UL 62275 First Edition Cable Management Systems Cable Ties for Electrical Installations February 26, 2010 (Title Page Reprinted: October 10, 2014) This national standard is based on publication IEC 62275, First edition (2006) ANSI/UL 62

13、275-2010 (R2014) Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating

14、 as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, C

15、SA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Cop

16、yright 2013 Rights reserved in favor of ANCE. ISBN 978-1-55436-680-4 2013 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to periodic review, and suggestions for its improvemen

17、t will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation 62275; relevant clause, table, and/or gure number; wording of the proposed change;

18、 and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2014 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor

19、electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the First Edition. The most recent designation of ANS

20、I/UL 62275 as an American National Standard (ANSI) occurred on October 8, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-

21、based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m-

22、or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .5 NATIONAL DIFFERENCES .8 FOREWORD 9 1 Scope 11 2 Normative references .11 3 Terms and denitions 13 4 General requirements 13 5 General notes

23、on tests .14 6 Classication 21 6.1 According to material 21 6.2 According to loop tensile strength for cable ties .21 6.3 According to temperature .22 6.4 According to contribution to re for non-metallic and composite cable ties only 23 6.5 According to environmental inuences .24 7 Marking and docum

24、entation .24 8 Construction .27 9 Mechanical properties 29 9.1 Requirements .29 9.2 Installation test 31 9.3 Minimum installation temperature test for cable ties 31 9.4 Minimum operating temperature test for cable ties .32 9.5 Loop tensile strength test for cable ties classied according to 6.2.1 .34

25、 9.6 Loop tensile strength test for cable ties classied according to 6.2.2 .36 9.7 Mechanical strength test for xing devices 40 10 Contribution to re 45 11 Environmental inuences 48 11.1 Resistance to ultraviolet light 48 11.2 Resistance to corrosion .50 12 Electromagnetic compatibility .53 13DV Smo

26、ke and heat release test 53 ANNEX DVA (Normative) Adhesives DVA.1 Scope .55 DVA.2 Requirements 55 DVA.3 Method general .55 DVA.4 As-received test 56 DVA.5 Effect of temperature .56 DVA.6 Effect of humidity .58 DVA.7 Effect of cold .58 DVA.8 Effect of cyclic conditions 58 DVA.9 Other test considerati

27、ons 59 FEBRUARY 26, 2010 NMX-J-623-ANCE CAN/CSA-C22.2 NO. 62275-10 UL 62275 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL ANNEX DVB (Normative) Smoke and heat release test DVB.1 Scope .60 DVB.2 Apparatus .60 ANNEX DVC (Informative) Substi

28、tution of materials DVC.1 Normative references .69 DVC.2 Criteria for substitution of materials .69 ANNEX DVD (Informative) Polymeric material modications DVD.1 Regrind material .70 DVD.2 Additives used in the moulding process .70 DVD.3 Blending materials 71 ANNEX DVE (Normative) Tests for Polymer I

29、dentication DVE.1 Normative references .72 DVE.2 Infrared spectroscopy .72 DVE.3 Thermogravimetry 74 DVE.4 Differential scanning calorimetry 75 ANNEX DVF (Informative) Index of requirements by type ANNEX DVG (Informative) Classications worksheet (Canada and the United States) FEBRUARY 26, 2010 NMX-J

30、-623-ANCE CAN/CSA-C22.2 NO. 62275-10 UL 62275 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the harmonized ANCE, CSA Group, and UL standard for Cable Management Systems Cable Ties for Electrical Installations. It is the rs

31、t edition of NMX-J-623-ANCE, the rst edition of CAN/CSA-C22.2 No. 62275, and the rst edition of UL 62275. This edition of CAN/CSA-C22.2 No. 62275 supersedes the requirements of CSA Standard C22.2 No. 18.5, published in 2002, for products covered in this standard, as indicated in the scope of this st

32、andard. This standard is an adoption, with national differences, of the identically titled CEI/IEC (Commission Electrotechnique Internationale/International Electrotechnical Commission) Standard IEC 62275 (rst edition, 2006-10). This harmonized standard was prepared by the Association of Standardiza

33、tion and Certication (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the CANENA Technical Harmonization Subcommittee 23A-62275 are gratefully acknowledged. This Standard is considered suitable for use for conformity assessment within the stated scope of the Sta

34、ndard. The Mexican Standard was developed by the CT PIE-A from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the collaboration of the manufacturers and users. This standard was reviewed by the CSA Integrated Committee on Fittings, Hardware, and Posi

35、tioning Devices, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by

36、 the Standards Council of Canada. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Where reference is made to a specic number of samples to be tested, the specied number is considered a minimum quantity. Note: Although the intended

37、 primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization This standard adopts the IEC text with national differences. This standa

38、rd is published as an equivalent standard for ANCE, CSA, and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in acco

39、rdance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. FEBRUARY 12, 2013

40、 NMX-J-623-ANCE CAN/CSA-C22.2 NO. 62275-10 UL 62275 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL All national differences from the IEC text are included in the ANCE, CSA, and UL versions of the standard. While the technical content is th

41、e same in each organizations version, the format and presentation may differ. Reasons for differences from IEC This standard adopts the IEC text with national differences. Throughout the standard, national differences have been identied for the countries to which they apply. These differences are ne

42、cessary in order to maintain compliance with existing nationally based codes and regulations, or to take into account essential safety practices or market based preferences. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based o

43、n the literal text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development

44、 organizations to more accurately reect the intent. ANCE effective date The effective date for ANCE will be announced through the Diario Ocial de la Federacin (Official Gazette) and is indicated on the cover page. CSA Group effective date The effective date for CSA Group will be announced through CS

45、A Informs or a CSA Group certication notice. UL effective date As of June 1, 2014 all products Listed or Recognized by UL must comply with the requirements in this standard. Between February 26, 2010 and June 1, 2014, new product submittals to UL may be evaluated under all requirements in this stand

46、ard or, if requested in writing, evaluated under presently effective requirements only. The presently effective requirements are contained in the Fourth edition of UL 1565. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. IEC Cop

47、yright For ANCE, the text, gures, and tables of International Electrotechnical Commission Publication 62275, Cable management systems Cable ties for electrical installations, copyright 2006, are used in this standard according to the guidelines provided in the ISO/IEC/POCOSA. For CSA, the text, gure

48、s, and tables of International Electrotechnical Commission Publication 62275, Cable management systems Cable ties for electrical installations, copyright 2006, are used in this standard with the consent of the International Electrotechnical Commission. The IEC Foreword is not a part of the requireme

49、nts of this standard but is included for information purposes only. FEBRUARY 12, 2013 NMX-J-623-ANCE CAN/CSA-C22.2 NO. 62275-10 UL 62275 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL For UL, the text, gures and tables of IEC publication 62275, Safety of Cable management systems Cable ties for electrical installations copyright 2006 are used in this Standard with t