UL 60947-7-1-2017 UL Standard for Safety Low-voltage switchgear and controlgear C Part 7-1 Ancillary equipment C Terminal blocks for copper conductors (Fourth Edition).pdf

《UL 60947-7-1-2017 UL Standard for Safety Low-voltage switchgear and controlgear C Part 7-1 Ancillary equipment C Terminal blocks for copper conductors (Fourth Edition).pdf》由会员分享，可在线阅读，更多相关《UL 60947-7-1-2017 UL Standard for Safety Low-voltage switchgear and controlgear C Part 7-1 Ancillary equipment C Terminal blocks for copper conductors (Fourth Edition).pdf（61页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60947-7-1 Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REP

2、RODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors, UL 60947-7-1 Fourth Edition, Date

3、d January 27, 2017 Summary of Topics This revision of ANSI/UL 60947-7-1 is to revise the National Differences to include Canada. This standard is harmonized for Canada, Mexico and the United States and co-published by all three standards development organizations (CSA Group, ANCE and UL). All rights

4、 reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed

5、 or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out

6、of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electr

7、onic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standar

8、d on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and

9、that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. JANUARY 27, 2017 UL 60947-7-1 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JANUARY 27, 2017 UL 60947-7-1 tr2 No Tex

10、t on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-538/7-1-ANCE First Edition CSA Group CAN/CSA-C22.2 No. 60947-7-1:17 First Edition (IEC 60947-7-1:2002, MOD) Underwriters Labor

11、atories Inc. UL 60947-7-1 Fourth Edition Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors January 27, 2017 This national standard is based on publication IEC 60947-7-1, second edition (2002) including Corrigendum 1 (2003). ANSI/UL 60947-7-1-2

12、017 Approved byUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Grou

13、p”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and

14、 UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2011 A

15、NCE Rights reserved in favor of ANCE. ISBN 978-1-4883-0019-6 2017 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review within ve years from the date of publication, and su

16、ggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number;

17、wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publications, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2017 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighte

18、d by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Fourth Edition inc

19、luding revisions through January 27, 2017. The most recent designation of ANSI/UL 60947-7-1 as an American National Standard (ANSI) occurred on January 27, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National

20、 Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Developme

21、nt System (CSDS) at https:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface . 5 NATIONAL DIFFERENCES . 8 FOREWORD 9 1 General .11 1.1 Sc

22、ope 11 1.2 Normative references 12 2 Denitions 12 3 Classication 13 4 Characteristics .14 4.1 Summary of characteristics .14 4.2 Type of terminal block .14 4.3 Rated and limiting values .14 5 Product information 17 5.1 Marking 17 5.2 Additional information 18 6 Normal service, mounting and transport

23、 conditions .19 7 Constructional and performance requirements .19 7.1 Constructional requirements 19 7.1.5DV.1 Insulation .22 7.2 Performance requirements 24 7.3 Electromagnetic compatibility (EMC) .26 8 Tests .26 8.1 Kinds of test 26 8.2 General 27 8.3 Verication of mechanical characteristics .28 8

24、.4 Verication of electrical characteristics .33 8.5 Verication of thermal characteristics 44 8.6 Verication of EMC characteristics .46 Annex A (informative) Clearances and creepage distances A.1 General .48 A.2 Determination of clearances and creepage distances .48 Annex B (informative) Items subjec

25、t to agreement between manufacturer and user Annex C (normative) Tightening torques for the verication of the mechanical strength of screw-type clamping units Annex DVA (normative) Aluminum Requirements DVA.1 Scope .52 DVA.2 Characteristics .52 JANUARY 27, 2017 NMX-J-538/7-1-ANCE CAN/CSA-C22.2 NO. 6

26、0947-7-1:17 UL 60947-7-1 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL DVA.3 Markings 52 DVA.4 Constructional requirements .52 DVA.5 Performance requirements .53 Annex DVB (normative) Normative References Bibliography JANUARY 27, 2017 NMX

27、-J-538/7-1-ANCE CAN/CSA-C22.2 NO. 60947-7-1:17 UL 60947-7-1 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the harmonized ANCE, CSA Group, and UL standard for Low-voltage switchgear and controlgear Part 7-1: Ancillary equip

28、ment Terminal blocks for copper conductors. It is the rst edition of NMX-J-538/7-1-ANCE, the rst edition of CAN/CSA-C22.2 No. 60947-7-1, and the fourth edition of UL 60947-7-1. This edition of UL 60947-7-1 supersedes the previous edition(s) published on May 6, 2011. This harmonized standard is based

29、 on IEC Publication 60947-7-1: Edition 2 (2002), Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors, as revised by corrigendum (March 2003). IEC 60947-7-1 is copyrighted by the IEC. This harmonized standard was prepared by the Association of St

30、andardization and Certication (ANCE), CSA Group, and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee for Industrial Control Equipment, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are

31、gratefully acknowledged. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. The Mexican Standard was developed by the CT PIE-A from the Comite de Normalizacion de la Asociacion de Normalizacion y Certicacion, A.C., CONANCE, with the collab

32、oration of the manufacturers and users. This standard was reviewed by the CSA Subcommittee on Terminal Assemblies, under the jurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approv

33、ed by the CSA Technical Committee. This standard has been approved as a National Standard of Canada by the Standards Council of Canada (SCC). This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference

34、is made to a specic number of samples to be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its

35、 suitability for their particular purpose. This is the NMX-J-538/7-1-ANCE Standard for Safety for Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors. This NMX-J-538/-1-ANCE Part 1 is to be used in conjunction with the appropriate NMX-J-538/7-1-

36、ANCE Part 2 and 3, which contains clauses to supplement or modify the corresponding clauses in the Part 1, to provide relevant requirements for each type of product. This is the CAN/CSA-C22.2 No. 60947-7-1 Standard for Safety for Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment T

37、erminal blocks for copper conductors. This CSA Group Part 1 is to be used in conjunction with the appropriate CSA Group Part 2 and 3, which contain clauses to supplement or modify the corresponding clauses in the Part 1, to provide relevant requirements for each type of product. This is the UL Stand

38、ard for Safety for Low-voltage switchgear and JANUARY 27, 2017 NMX-J-538/7-1-ANCE CAN/CSA-C22.2 NO. 60947-7-1:17 UL 60947-7-1 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL controlgear Part 7-1: Ancillary equipment Terminal blocks for copp

39、er conductors. This UL Part 1 is to be used in conjunction with the appropriate UL Part 2 and 3, which contain clauses to supplement or modify the corresponding clauses in the Part 1, to provide relevant requirements for each type of product. Level of harmonization This standard adopts the IEC text

40、with national differences. This standard is published as an equivalent standard for ANCE, CSA Group, and UL. An equivalent standard is a standard that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations

41、as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technological, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word exc

42、ept for editorial changes. All national differences from the IEC text are included in the ANCE, CSA Group and UL versions of the standard. While the technical content is the same in each organizations version, the format and presentation may differ. Reasons for differences from IEC National differen

43、ces from the IEC are being added in order to address safety and regulatory situations present in the US, Canada and Mexico. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with th

44、e standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent

45、. IEC Copyright For ANCE, the text, gures, and tables of International Electrotechnical Commission Publication 60947-7-1, Low-Voltage Switchgear and Controlgear Part 71: Ancillary Equipment Terminal Blocks for Copper Conductors, are used in this standard according to the guidelines provided in the I

46、SO/IEC/POCOSA. For CSA Group, the text, gures, and tables of International Electrotechnical Commission Publication 60947-7-1, Low-Voltage Switchgear and Controlgear Part 71: Ancillary Equipment Terminal Blocks for Copper Conductors, copyright 2002, are used in this standard with the consent of the I

47、nternational Electrotechnical Commission. The IEC Foreword is not a part of the requirements of this standard but is included for information purposes only. For UL, the text, gures and tables of IEC publication 60947-7-1, Low-Voltage Switchgear and Controlgear Part 7-1: Ancillary Equipment Terminal

48、Blocks for Copper Conductors copyright 2002 are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of th

49、e IEC material. The IEC Foreword is not a part of the requirements of this Standard but is included for information purposes only. Copies of IEC Publication 60947-7-1 may be purchased from ANSI, 25 West 43rd Street, 4th Floor, New York, New York, 10036, JANUARY 27, 2017 NMX-J-538/7-1-ANCE CAN/CSA-C22.2 NO. 60947-7-1:17 UL 60947-7-1 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITH