UL 60730-2-15-2014 UL STANDARD FOR SAFETY Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic Electrical Air Flow Water Flow ann.pdf

《UL 60730-2-15-2014 UL STANDARD FOR SAFETY Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic Electrical Air Flow Water Flow ann.pdf》由会员分享，可在线阅读，更多相关《UL 60730-2-15-2014 UL STANDARD FOR SAFETY Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Automatic Electrical Air Flow Water Flow ann.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-15 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing ControlsUL COPYR

2、IGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2:

3、 Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls, UL 60730-2-15 Second Edition, Dated July 29, 2014 Summary of Topics UL 60730-2-15 is an adoption of the second edition of IEC 60730-2-15. This new edition dated July 29, 2014, was issued to reect

4、 the latest approval date as an American National Standard that was proposed March 28, 2014. For further information regarding Summary of Requirements, please visit https:/ It is also being issued to reect the established effective date for UL 60730-2-15. AS OF OCTOBER 19, 2018, THE FIRST EDITION OF

5、 UL 60730-2-16A, THE FIRST EDITION OF UL 60730-2-18, AND THE TWELFTH EDITION OF UL 873 WILL BE WITHDRAWN AND WILL BE REPLACED BY THIS STANDARD. The revised requirements are substantially in accordance with Proposal(s) on this subject dated March 28, 2014. All rights reserved. No part of this publica

6、tion may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not lim

7、ited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to

8、use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for

9、 Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer syste

10、m. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date

11、are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. The following table lists the future effective dates with the corresponding reference. JULY 29, 2014 UL 60730-2-15 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSI

12、ON FROM UL Future Effective Date Reference October 19, 2018 Second Edition JULY 29, 2014 UL 60730-2-15 tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL July 29, 2014 1 UL 60730-2-15 Standard for Automatic Electrical Controls for Household

13、and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls Prior to the second edition of UL 60730-2-15, the requirements for the products covered by this Standard were included in UL 60730-2-16A and in UL 60730-2-18. Second Editio

14、n July 29, 2014 This ANSI/UL Standard for Safety consists of the Second Edition dated July 29, 2014. The most recent designation of ANSI/UL 60730-2-15 as an American National Standard (ANSI) occurred on July 29, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, T

15、itle Page, Preface, or effective date information. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Pr

16、oposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those

17、 Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 60730-2-15-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 29, 2014 UL 60730-2-15 2 No Text on This PageUL COPYRIGH

18、TED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface (UL) 6 NATIONAL DIFFERENCES .7 FOREWORD 8 1 Scope and normative references .11 1.5 Normative references 12 2 Denitions 12 2.2 Denitions of types of control according to purpose 13 2.3 Den

19、itions relating to the function of controls .14 3 General requirements 14 4 General notes on tests .14 4.1 Conditions of test 14 4.3 Instructions for test 15 5 Rating 15 6 Classication 15 6.3 According to their purpose 15 6.4 According to features of automatic action .16 6.5 According to the degree

20、of protection and control pollution degree 16 7 Information 16 8 Protection against electric shock .18 9 Provision for protective earthing .18 10 Terminals and terminations 18 10.1 Terminals and terminations for external copper conductors 18 11 Constructional requirements 18 11.4 Actions 18 11.7 Att

21、achment of cords 19 11.11 Requirements during mounting, maintenance and servicing 20 11.101 Construction requirements relating to operating mechanism .20 12 Moisture and dust resistance .20 12.1 Protection against ingress of water and dust .20 13 Electric strength and insulation resistance .21 13.10

22、1 Electric strength of probes 21 14 Heating 21 15 Manufacturing deviation and drift .22 16 Environmental stress 22 17 Endurance .22 17.1 General requirements .22 17.16 Test for particular purpose controls 23 18 Mechanical strength .24 18.102 Strength of parts (hydrostatic) .25 19 Threaded parts and

23、connections 25 19.101DV.1 10-day moist ammonia air stress cracking test 26 20 Creepage distances, clearances and distances through solid insulation .26 21 Fire hazard testing 26 22 Resistance to corrosion 26 23 Electromagnetic compatibility (EMC) requirements emission 26 24 Components .27 25 Normal

24、operation .27 JULY 29, 2014 UL 60730-2-15 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 26 Electromagnetic compatibility (EMC) requirements immunity .27 27 Abnormal operation .27 28 Guidance on the use of electronic disconnection .27 Figu

25、res Annexes Annex H (normative) Requirements for electronic controls H.7 Information 30 H.11 Constructional requirements 30 H.11.12 Controls using software 30 H.23 Electromagnetic compatibility (EMC) requirements emission 30 H.23.1.2 Radio frequency emission .30 H.26 Electromagnetic compatibility (E

26、MC) requirements immunity .31 H.26.5 Voltage dips and voltage interruptions in the power supply network 32 H.26.6 Test of inuence of voltage unbalance 33 H.26.8 Surge immunity test 33 H.26.9 Electrical fast transient/burst test .33 H.26.10 Ring wave test 33 H.26.12 Radio-frequency electromagnetic el

27、d immunity .34 H.26.13 Test of inuence of supply frequency variations .34 H.26.14 Power frequency magnetic eld immunity test 34 H.26.15 Evaluation of compliance .35 H.27 Abnormal operation .35 Annex AA (normative) Number of cycles for independently mounted controls for boiler applications a Annex BB

28、 (normative) Requirements for response delay Annex CC (informative) Number of cycles for independently mounted air ow and water ow sensing controls a JULY 29, 2014 UL 60730-2-15 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JULY 29, 2014

29、UL 60730-2-15 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL Standard, UL 60730-2-15, Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for A

30、utomatic Electrical Air Flow, Water Flow and Water Level Sensing Controls, is to be used in conjunction with UL 60730-1. The requirements for automatic electrical air ow, water ow and water level sensing controls are contained in this part 2 standard and UL 60730-1. Requirements of this Part 2 Stand

31、ard, where stated, amend the requirements of UL 60730-1. Where a particular subclause of UL 60730-1 is not mentioned in UL 60730-2-15, the UL 60730-1 subclause applies. The text, gures and tables of the IEC Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular

32、Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls, 60730-2-15, copyright 2008, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from A

33、NSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 60730-2-15 may be purchased from ANSI, 25 West

34、43rd Street, 4th Floor, New York, NY 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular purpose. These mat

35、erials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the UL 60730-2-15 standard should be submitted to UL. UL effective date Th

36、e effective date for UL 60730-2-15, second edition, is October 19, 2018. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. JULY 29, 2014 UL 60730-2-15 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTIO

37、N WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotechnical Commission (IEC) Publication 60730-2-15, Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Wate

38、r Flow and Water Level Sensing Controls, copyright 2008, are indicated by notations (differences) and are presented in bold text. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not i

39、nclude all types of these National Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of prod

40、ucts. D2 These are national differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These

41、are National Differences based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE These are National Differences based on editorial comments or corrections. Each national difference contains a description of what

42、 the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant

43、 to include adding select words to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or deletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion

44、 / Delete - A deletion entails complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. JULY 29, 2014 UL 60730-2-15 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROT

45、ECHNICAL COMMISSION AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-12: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardiz

46、ation comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes Internatio

47、nal Standards, Technical Specications, Technical Reports, Publicly Available Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this

48、preparatory work. International, governmental and nongovernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two org

49、anizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical c