TIA-902 BAAE-A-2002 Wideband Air Interface - Logical Link Control (LLC) Layer Specification - Public Safety Wideband Data Standards Project - Digital Radio Technical Standards.pdf

《TIA-902 BAAE-A-2002 Wideband Air Interface - Logical Link Control (LLC) Layer Specification - Public Safety Wideband Data Standards Project - Digital Radio Technical Standards.pdf》由会员分享，可在线阅读，更多相关《TIA-902 BAAE-A-2002 Wideband Air Interface - Logical Link Control (LLC) Layer Specification - Public Safety Wideband Data Standards Project - Digital Radio Technical Standards.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-902.BAAE-A (Upgrade and Revision to TIA-902.BAAE) February 2007Wideband Air Interface- Logical Link Control (LLC) Layer Specification ANSI/TIA-902.BAAE-A-2007 APPROVED: FEBRUARY 12, 2007REAFFIRMED: OCTOBER 3, 2013NOTICE TIA Engineering Standards and Publications are designed to serve the public

2、 interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards a

3、nd Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestica

4、lly or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard

5、or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory

6、 limitations before its use. (From Project No. SP-3-0081-UGRV1-RF1, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.5 Subcommittee on Signaling and Data Transmission). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no as

7、surance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of int

8、ellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the h

9、older thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are

10、instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document o

11、r its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such ref

12、erence consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs

13、policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of

14、 a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Docu

15、ment. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERT

16、Y RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFE

17、RRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENT

18、IAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGE

19、S IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. WAI LLC Layer Specification TIA-102.BAAE-A i Foreword (This foreword is not part of this standard.) This document has been published by the Telecommunications Indu

20、stry Association (TIA) in accordance with the terms and conditions provided for in a Memorandum of Understanding (MoU) executed by and between the TIA, the Associated Public-Safety Communications Officials (APCO), the National Association of State Telecommunications Directors (NASTD), and the variou

21、s agencies of the Federal government (FED). This TIA Standard is being promulgated and will be maintained by the TR-8.5 Signaling and Data Transmission committee, and working groups under the sponsorship of the Telecommunications Industry Association. This document has been published as a TIA Standa

22、rd because it contains useful technical information on emerging digital techniques for Land Mobile Radio Service. In particular, it describes the wideband air interface logical link control layer technology. Generally, the wideband air interface has been developed by TIA TR-8.5 to be consistent with

23、 the Statement of Requirements adopted by the National Coordination Committees Interoperability Subcommittee, WG6 Wideband Data. This document references that the primary user needs document will be “APCO Project 25/34 Statement of Requirements (P34SOR)”. This logical Link control layer specificatio

24、n provides a standard for the definition and control of transmission for high-speed digital information over 50, 100, and 150 kHz bandwidth physical radio media. The TIA makes no claims as to the applicability of the information contained in this document for any purpose although it is believed that

25、 the information will prove to be invaluable to designers of wideband data compliant equipment. Some aspects of the specifications contained in this document may not have been fully operationally tested; however, a great deal of time and good faith effort has been invested in the preparation of this

26、 document to ensure the accuracy of the information it contains. While all reasonable efforts have been made to ensure the accuracy of this document, it should be understood that significant work remains in fully developing the standard series and this document will be updated as necessary. TIA-902.

27、BAAE-A WAI LLC Layer Specification ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication of this document, no position is taken with respect to the validity

28、 of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. The foll

29、owing patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: None currently identified TIA shall not be responsible for identifying patents for which licenses may be required by this document or for conducting inquiries into the legal validity

30、 or scope of those patents that are brought to its attention. WAI LLC Layer Specification TIA-102.BAAE-A iii TABLE OF CONTENTS 1. SCOPE1 2. TERMS.2 3. GENERAL LLC LAYER DESCRIPTION.3 3.1 LLC LOGICAL LINK TYPES3 3.1.1 Control Plane (CP) Link .3 3.1.2 User Plane (UP) Link3 3.2 LLC INTERFACE TO SERVICE

31、 USERS .4 3.3 LLC INTERFACE TO MAC/RLA LAYER4 3.4 LLC SERVICES 4 3.4.1 Unconfirmed Delivery Service 5 3.4.2 Confirmed Delivery Service 5 3.4.3 Extended Error Detection5 3.4.4 Flow Control .5 3.4.5 Windowing.5 3.4.6 Bundling of LLC Data .6 3.4.7 Signaling Fragmentation.6 3.4.8 State Variables 6 3.4.9

32、 Logical Link and Service Relationships 7 4. CONTROL PLANE OPERATION FOR ALL CONFIGURATIONS.8 4.1 LINK STATE TRANSITION DIAGRAM8 4.1.1 Closed State.8 4.1.2 Open State .8 4.2 CP LINK PARAMETERS 9 4.3 LINK STATE VARIABLES .9 4.4 CONFIRMED SIGNALING TRANSFER PROCEDURES 9 4.4.1 MTU Size .10 4.4.2 Transm

33、ission .10 4.4.3 Sliding Window ARQ.10 4.4.4 Reception.11 4.4.5 ARQ Retransmission11 4.4.6 Confirmed Signaling Transfer Example MSC.12 4.5 UNCONFIRMED SIGNALING TRANSFER PROCEDURES.12 4.5.1 MTU Size .12 4.5.2 Transmission .12 4.5.3 Reception.13 4.5.4 Unconfirmed Signaling Transfer Example MSC.13 5.

34、USER PLANE LLC OPERATION FOR ALL CONFIGURATIONS .14 5.1 LINK STATE TRANSITION DIAGRAMS FOR FNE CONFIGURATIONS .14 5.1.1 Closed State.15 5.1.2 Connect State (MRC Only)15 5.1.3 Open State .15 5.1.4 Reconnect State .16 5.2 LINK STATE TRANSITION DIAGRAMS FOR DIRECT CONFIGURATIONS .16 5.3 UP LINK PARAMET

35、ERS 16 5.3.1 UP Link Connection Example MSC 17 5.3.2 UP Link Reconnection Example MSC.18 5.3.3 Link State Variables 18 5.4 CONFIRMED DATA TRANSFER PROCEDURES19 5.4.1 MTU Size and Segmentation .19 5.4.2 Transmission .19 TIA-902.BAAE-A WAI LLC Layer Specification iv 5.4.3 Sliding Window SARQ 19 5.4.4

36、Reception 20 5.4.5 SARQ Retransmission. 20 5.4.6 Bundling 21 5.4.7 Confirmed Data Transfer Example MSC 22 5.5 UNCONFIRMED DATA TRANSFER PROCEDURES 23 5.5.1 MTU Size and Segmentation. 23 5.5.2 Transmission. 23 5.5.3 Reception 23 5.5.4 Bundling 23 5.5.5 Unconfirmed Data Transfer Example MSC 24 6. LLC

37、PDU FORMAT DEFINITION . 25 6.1 CONTROL PLANE (CP) LINK PDUS 25 6.1.1 CP_DATA . 25 6.1.2 CP_RES 25 6.2 USER PLANE (UP) LINK PDUS 26 6.2.1 UP_CONNECT. 26 6.2.2 UP_DISC 26 6.2.3 UP_DATA. 26 6.2.4 UP_ DATA_END 27 6.2.5 UP_BUNDLE .27 6.2.6 UP_ RES. 28 7. LLC INFORMATION ELEMENT DEFINITION 29 7.1 COMMON E

38、LEMENTS 29 7.1.1 ACK / NACK (A/N) . 29 7.1.2 ACK Request (AR) 29 7.1.3 FCS Present (F) 29 7.1.4 Frame Check Sequence (FCS) 29 7.1.5 LLC Format 31 7.1.6 Service Access Point (SAP). 31 7.1.7 Type 32 7.2 CONTROL PLANE SPECIFIC ELEMENTS. 33 7.2.1 Control PDU Length (CL) 33 7.2.2 Fragment Sequence Number

39、 Field (FSNF) 33 7.3 USER PLANE SPECIFIC ELEMENTS. 33 7.3.1 ACK Bitmap 33 7.3.2 Bitmap Size (BMS) 33 7.3.3 Bundle Header (BH). 34 7.3.4 Disconnect Type (DT). 34 7.3.5 Flow Control (RR) 34 7.3.6 Pad Octets (PAD) . 34 7.3.7 Response Code (RC). 35 7.3.8 Reconnect Flag (RF).35 7.3.9 Sent Segment Number

40、S(S) . 36 7.3.10 Service Data Unit (SDU) . 36 7.3.11 Service Data Unit (SDU) Segment. 36 7.4 USER PLANE NEGOTIATED PARAMETERS 36 7.4.1 UP Window Size (NL.200) 36 7.4.2 UP Number of Confirmed Retries (NL.201) . 36 7.4.3 UP MTU Size (NL.202). 36 7.4.4 UP Acknowledgement Timeout (TL.200) 37 7.4.5 UP Fl

41、ow Control Timeout (TL.201) . 37 7.4.6 UP Receive Timeout (TL.202) 37 8. REFERENCES 38 WAI LLC Layer Specification TIA-102.BAAE-A v Table of Figures FIGURE 1. GENERAL WIDEBAND DATA SYSTEM MODEL.1 FIGURE 2. CP LINK STATE TRANSITION DIAGRAM .8 FIGURE 3. EXAMPLE CP CONFIRMED SIGNALING TRANSFER MSC.12 F

42、IGURE 4. EXAMPLE CP UNCONFIRMED SIGNALING TRANSFER MSC .13 FIGURE 5. MRC UP LLC STATE TRANSITION DIAGRAM.14 FIGURE 6. FNE UP LLC STATE TRANSITION DIAGRAM14 FIGURE 7. EXAMPLE UP LINK CONNECTION MSC 17 FIGURE 8. EXAMPLE UP LINK RECONNECTION MSC18 FIGURE 9. EXAMPLE UP CONFIRMED DATA TRANSFER MSC22 FIGU

43、RE 10. EXAMPLE UP UNCONFIRMED DATA TRANSFER MSC.24 FIGURE 11. CP_ DATA PDU FORMAT .25 FIGURE 12. CP_ RES PDU FORMAT.25 FIGURE 13. UP_ CONNECT PDU FORMAT .26 FIGURE 14. UP_ DISC PDU FORMAT.26 FIGURE 15. UP_ DATA PDU FORMAT.26 FIGURE 16. UP_ DATA_END PDU FORMAT.27 FIGURE 17. UP_ BUNDLE PDU FORMAT27 FI

44、GURE 18. UP_RES PDU FORMAT28 TIA-902.BAAE-A WAI LLC Layer Specification vi List of Tables TABLE 1. LLC SERVICE PRIMITIVES . 4 TABLE 2. MAC/RLA SERVICE PRIMITIVES. 4 TABLE 3. MAPPING OF LLC LOGICAL LINKS AND SERVICES. 7 TABLE 4. CP LINK PARAMETER VALUES 9 TABLE 5. UP LINK PARAMETER VALUES . 16 TABLE

45、6. ACK REQUEST VALUES . 29 TABLE 7. LLC PDU ID DESCRIPTION 31 TABLE 8. SAP DEFINITIONS . 31 TABLE 9. A/N AND TYPE FIELD DEFINITIONS 32 TABLE 10. FSNF VALUES . 33 TABLE 11. BUNDLE HEADER DEFINITION 34 TABLE 12. DISCONNECT TYPE DEFINITION 34 TABLE 13. FLOW CONTROL DEFINITION 34 TABLE 14. RESPONSE CODE

46、S (RC) 35 TABLE 15. NL.202 VALUES. 36 TABLE 16. TL.200 VALUES. 37 TABLE 17. TL.201 VALUES. 37 TABLE 18. TL.202 VALUES. 37 TABLE 19. DATA SEGMENT SIZES FOR UP_DATA (FNE CONFIGURATIONS). 39 TABLE 20. DATA SEGMENT SIZES FOR UP_DATA_END (FNE CONFIGURATIONS). 39 TABLE 21. DATA SEGMENT SIZES FOR UP_DATA (

47、DIRECT CONFIGURATIONS) . 39 TABLE 22. DATA SEGMENT SIZES FOR UP_DATA_END (DIRECT CONFIGURATIONS). 39 DOCUMENT REVISION HISTORY Revision History Version Date Description V 0.25 4/5/2002 Initial draft submitted to TR-8.5 for review. V 0.90 6/6/2002 Second draft submitted for TR-8.5 review. V 0.95 6/18

48、/2002 Added PN-3-0081 for TIA ballot V 0.96 7/31/02 Updated with proposed ballot comment resolutions. V 0.97 8/2/02 Updated per 8/1/02 WB WG Teleconference discussion. V 1.0 8/30/02 Final edits for TIA publication Issue A 6/20/06 Proposed Updates per Open Issues Issue B 10/19/2006 Updated per TR-8.5

49、_2006_0021 comment resolutions, copy for Ballot Issue C 1/9/2007 Updated per TIA legal Ballot comments Issue D 1/25/2007 Final edits for TIA Publication WAI LLC Layer Specification TIA-902.BAAE-A 1 1. Scope The scope of this document is to define the logical link control layer, or LLC layer, of the wideband air interface (WAI). The wideband air interface called Uwis the interface between the fixed network equipment (FNE) and the subscriber units, or directly between subscriber units in a wideband system. The general wideband system model is shown in Figure 1 and illustrates the Radi