TIA-1121 012-2009 Medium Access Control for Ultra Mobile Broadband (UMB) TDD Air Interface Specification《超移动宽带(UMB)TDD空中接口规范的媒介接入控制》.pdf

《TIA-1121 012-2009 Medium Access Control for Ultra Mobile Broadband (UMB) TDD Air Interface Specification《超移动宽带(UMB)TDD空中接口规范的媒介接入控制》.pdf》由会员分享，可在线阅读，更多相关《TIA-1121 012-2009 Medium Access Control for Ultra Mobile Broadband (UMB) TDD Air Interface Specification《超移动宽带(UMB)TDD空中接口规范的媒介接入控制》.pdf（318页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-1121.012-2009 APPROVED: JANUARY 1, 2009 REAFFIRMED: DECEMBER 2, 2013 TIA-1121.012 January 2009Medium Access Control for Ultra Mobile Broadband (UMB) TDD Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating mi

2、sunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any

3、 respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standard

4、s and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard do

5、es not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any

6、 use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. PN-3-0272.012-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the D

7、ocument will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property

8、 rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is r

9、equested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to th

10、e parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If

11、 the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of

12、 mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encourag

13、ement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essent

14、ial Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTI

15、ES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPR

16、ESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOC

17、UMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLU

18、DING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL

19、 ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0084-012-0 v1.0 CONTENTS i FOREWORD. xxiii 1 NOTES .xxv 2 REFERENCES1-1 3 1 GENERAL1-1 4 1.1 Overview1-1 5 1.2 Common Definitions1-1 6 1.2.1 Power Density1-1 7 1.3 Data Enc

20、apsulation.1-1 8 1.4 Superframe Structure for the Basic Physical Layer1-2 9 1.4.1 FDD Superframe Structure1-2 10 1.4.2 TDD Superframe Structures 1-3 11 1.4.2.1 TDD Superframe Coexistence Structures .1-6 12 1.5 FDD HARQ Interlacing Structures for the Basic Physical Layer .1-8 13 1.5.1 FL interlacing

21、structures .1-8 14 1.5.1.1 Eight interlace structure without extended transmissions1-8 15 1.5.1.2 Six interlace structure without extended transmissions.1-9 16 1.5.1.3 Eight interlace structure with extended transmissions.1-9 17 1.5.1.4 Eight interlace structure with two frame transmission.1-10 18 1

22、.5.1.5 Six interlace structure with two frame transmission 1-11 19 1.5.2 RL interlacing structures .1-12 20 1.5.2.1 Eight interlace structure without extended transmissions1-12 21 1.5.2.2 Eight interlace structure with extended transmissions.1-13 22 1.6 TDD HARQ Interlacing Structures for the Basic

23、Physical Layer .1-13 23 1.6.1 General definitions for TDD m:n interlacing structures1-14 24 1.6.2 TDD 4:4 interlacing structures 1-15 25 1.6.2.1 TDD 4:4 FL interlacing structures1-15 26 1.6.2.1.1 TDD 4:4 FL 4-interlace structure .1-15 27 1.6.2.1.2 TDD 4:4 FL 4-interlace structure with two PHY Frames

24、 28 transmissions .1-16 29 1.6.2.2 TDD 4:4 RL interlacing structures .1-17 30 1.6.2.2.1 TDD 4:4 RL 4-interlace structure without extended transmissions.1-17 31 1.6.2.2.2 TDD 4:4 RL 4-interlace structure with extended transmissions1-18 32 3GPP2 C.S0084-012-0 v1.0 CONTENTS ii 1.6.3 TDD 6:2 interlacing

25、 structures 1-20 1 1.6.3.1 TDD 6:2 FL interlacing structure.1-20 2 1.6.3.2 TDD 6:2 RL interlacing structures .1-20 3 1.6.3.2.1 TDD 6:2 RL 2-interlace structure.1-21 4 1.6.3.2.2 TDD 6:2 RL interlace structure with extended transmissions.1-21 5 1.6.4 TDD 5:3 interlacing structures 1-23 6 1.6.4.1 TDD 5

26、:3 FL interlacing structure.1-23 7 1.6.4.2 TDD 5:3 RL interlacing structures .1-24 8 1.6.4.2.1 TDD 5:3 RL 3-interlace structure.1-24 9 1.6.4.2.2 TDD 5:3 RL interlace structure with extended transmissions.1-25 10 1.6.5 TDD 3:5 interlacing structures 1-26 11 1.6.5.1 TDD 3:5 FL interlacing structure.1-

27、26 12 1.6.5.2 TDD 3:5 RL interlacing structures .1-27 13 1.6.5.2.1 TDD 3:5 RL 3-interlace structure.1-27 14 1.6.5.2.2 TDD 3:5 RL 3-interlace structure with extended transmissions .1-28 15 2 TDD Forward Link Control Segment MAC Protocol2-1 16 2.1 Overview .2-1 17 2.2 Primitives2-3 18 2.2.1 Commands2-

28、3 19 2.2.2 Return Indications 2-3 20 2.2.3 Local Common Data2-3 21 2.2.4 Public Data .2-3 22 2.3 Protocol Data Unit.2-4 23 2.4 Procedures and Messages for the InConfiguration Instance of the Protocol2-4 24 2.4.1 Protocol Initialization.2-4 25 2.4.2 Procedures 2-4 26 2.4.3 Message Formats 2-4 27 2.5

29、Procedures for the InUse Instance.2-4 28 2.5.1 Initialization and Commit Procedures2-4 29 2.5.1.1 Protocol Initialization for the InUse Protocol Instance 2-4 30 2.5.1.2 Hard Commit Procedures 2-4 31 2.5.1.3 Soft Commit Procedures 2-4 32 3GPP2 C.S0084-012-0 v1.0 CONTENTS iii 2.5.2 Command Processing

30、2-4 1 2.5.2.1 Activate2-4 2 2.5.2.2 Deactivate2-5 3 2.5.3 Inactive State.2-5 4 2.5.4 Active State .2-5 5 2.5.4.1 Access Network Requirements .2-5 6 2.5.4.1.1 Procedures for the F-SCCH 2-5 7 2.5.4.1.1.1 Blocks of the F-SCCH.2-5 8 2.5.4.1.1.2 Framing of F-SCCH Blocks.2-11 9 2.5.4.1.1.3 Rules for the F

31、-SCCH Blocks2-13 10 2.5.4.1.1.3.1 AccessGrant .2-13 11 2.5.4.1.1.3.1.1 Procedures for Sending an Access Grant.2-13 12 2.5.4.1.1.3.2 Forward Link Assignment Blocks .2-14 13 2.5.4.1.1.3.2.1 Subzone Forward Link Assignment Blocks .2-14 14 2.5.4.1.1.3.2.2 Residual Resource Assignment FLABs 2-15 15 2.5.4

32、.1.1.3.2.3 Multiple Codeword MIMO Forward Link Assignment 16 Block part 12-15 17 2.5.4.1.1.3.2.4 Multiple Codeword MIMO Forward Link Assignment 18 Block part 22-16 19 2.5.4.1.1.3.2.5 Single Code Word MIMO Forward Link Assignment 20 Blocks (TDD).2-16 21 2.5.4.1.1.3.3 RLAB2-17 22 2.5.4.1.1.3.4 PDCAB .

33、2-18 23 2.5.4.1.1.3.5 GRA bitmap2-18 24 2.5.4.1.1.3.6 Indexing F-SCCH Blocks 2-18 25 2.5.4.1.2 Procedures for F-PCCH 2-19 26 2.5.4.1.3 Procedures for F-PQICH.2-20 27 2.5.4.1.4 Procedures for F-FOSICH.2-21 28 2.5.4.1.5 Procedures for F-IOTCH .2-21 29 2.5.4.1.6 Procedures for F-RABCH2-22 30 2.5.4.1.7

34、Procedures for F-ACKCH2-23 31 2.5.4.1.8 Procedures for F-SPCH.2-25 32 2.5.4.2 Access Terminal Requirements 2-27 33 3GPP2 C.S0084-012-0 v1.0 CONTENTS iv 2.5.4.2.1 Access Terminal Requirements In Case Of Outstanding Access 1 Probe 2-27 2 2.5.4.2.1.1 RPICHScramblingSeed.2-30 3 2.5.4.2.2 Access Terminal

35、 Requirements In Case Of No Outstanding Access 4 Probe 2-31 5 2.5.4.3 General Procedures .2-33 6 2.5.4.3.1 Procedures for Half-Duplex Mode 2-33 7 2.5.4.3.1.1 Access Network Procedures2-33 8 2.5.4.3.1.2 Access Terminal Procedures.2-34 9 2.5.4.3.2 Procedures for SelectedInterlace Operation2-34 10 2.5.

36、4.3.2.1 Access Network Procedures2-34 11 2.5.4.3.2.2 Access Terminal Procedures:2-34 12 2.5.4.3.3 Procedures for Semi-Connected State 2-35 13 2.5.4.3.4 Procedures for TuneAway Operation 2-35 14 2.6 Message Formats for the InUse Instance .2-35 15 2.6.1 TimingCorrection.2-35 16 2.7 Header and Trailer

37、Formats 2-36 17 2.8 Interface to Other Protocols.2-36 18 2.8.1 Commands2-36 19 2.8.2 Indications 2-36 20 2.9 Configuration Attributes .2-36 21 2.9.1 Simple Attributes 2-36 22 2.10 Protocol Numeric Constants2-37 23 2.11 Session State Information .2-37 24 3 TDD Forward Traffic Channel MAC Protocol3-1

38、25 3.1 Overview .3-1 26 3.2 Primitives3-2 27 3.2.1 Commands3-2 28 3.2.2 Return Indications 3-3 29 3.2.3 Local Common Data3-3 30 3.2.4 Public Data .3-3 31 3.3 Protocol Data Unit.3-3 32 3GPP2 C.S0084-012-0 v1.0 CONTENTS v 3.4 Procedures and Messages for the InConfiguration Instance of the Protocol3-3

39、1 3.4.1 Protocol Initialization.3-3 2 3.4.2 Procedures 3-3 3 3.4.3 Message Formats.3-3 4 3.5 Procedures for the InUse Instance .3-3 5 3.5.1 Initialization and Commit Procedures 3-3 6 3.5.1.1 Protocol Initialization for the InUse Protocol Instance.3-3 7 3.5.1.2 Hard Commit Procedures.3-4 8 3.5.1.3 So

40、ft Commit Procedures 3-4 9 3.5.2 Command Processing 3-4 10 3.5.2.1 Activate3-4 11 3.5.2.2 Deactivate3-4 12 3.5.3 Forward Traffic Channel Addressing 3-4 13 3.5.3.1 Time Overlapping Assignments 3-6 14 3.5.3.2 Summary of Rules for Forward Traffic Channel Addressing3-7 15 3.5.4 Inactive State.3-9 16 3.5

41、.5 Active State .3-9 17 3.5.5.1 Access Terminal Requirements 3-9 18 3.5.5.1.1 Access Terminal Assignment Management .3-9 19 3.5.5.1.1.1 Access Terminal Rules for Processing Assignment Blocks.3-9 20 3.5.5.1.1.1.1 Definition of fATA_Computation3-12 21 3.5.5.1.1.2 Access Terminal Rules for Overlapping

42、Assignments 3-13 22 3.5.5.1.1.3 Access Terminal Assignment Management for Persistent 23 Assignments.3-13 24 3.5.5.1.1.3.1 Deassigning Assignments .3-14 25 3.5.5.1.1.3.2 Supplemental and Non-Supplemental Assignments3-14 26 3.5.5.1.1.3.2.1 Supplemental Assignments.3-14 27 3.5.5.1.1.3.2.2 Non-Supplemen

43、tal Assignments .3-15 28 3.5.5.1.1.3.3 Resource Reassignment3-15 29 3.5.5.1.1.3.4 HARQ Extension.3-16 30 3.5.5.1.1.3.5 Assignment Acknowledgement3-16 31 3GPP2 C.S0084-012-0 v1.0 CONTENTS vi 3.5.5.1.1.4 Access Terminal Assignment Management for Non-Persistent 1 Assignments 3-17 2 3.5.5.1.1.4.1 Deassi

44、gning Assignments.3-17 3 3.5.5.1.1.4.2 New non-persistent assignments3-17 4 3.5.5.1.1.4.3 Resource Reassignment .3-18 5 3.5.5.1.1.4.4 HARQ Extension 3-18 6 3.5.5.1.1.4.5 Assignment Acknowledgement .3-19 7 3.5.5.1.1.5 Access Terminal Assignment Management for Residual 8 Resource Assignments .3-19 9 3

45、.5.5.1.1.5.1 New residual resource assignments3-20 10 3.5.5.1.1.5.2 Deassigning Assignments.3-20 11 3.5.5.1.1.5.3 Resource Reassignment .3-20 12 3.5.5.1.1.5.4 HARQ Extension 3-21 13 3.5.5.1.1.5.5 Determining the final FL-R-ATA .3-21 14 3.5.5.1.1.5.6 Assignment Acknowledgement .3-21 15 3.5.5.1.1.6 Ac

46、cess Terminal Assignment Management for Group Resource 16 Assignments 3-22 17 3.5.5.1.1.6.1 Group Index.3-22 18 3.5.5.1.1.6.2 Group Resources3-22 19 3.5.5.1.1.6.3 Group Interlace3-23 20 3.5.5.1.1.6.4 Group Resource Allocation Bitmap.3-23 21 3.5.5.1.1.6.4.1 Resource Availability Bitmap3-24 22 3.5.5.1

47、.1.6.4.2 Reserved Resources Field .3-24 23 3.5.5.1.1.6.4.3 Access Terminal Presence Bitmap 3-24 24 3.5.5.1.1.6.4.4 Allocation Sizes or Packet Formats Bitmap.3-25 25 3.5.5.1.1.6.4.5 Mini MAC Field.3-26 26 3.5.5.1.1.6.4.6 Group Resource Allocation Bitmap Transmission .3-27 27 3.5.5.1.1.6.4.7 Group Res

48、ource Allocation Bitmap Packet Size 3-27 28 3.5.5.1.1.6.4.8 Group Resource Allocation Bitmap Modulation 3-28 29 3.5.5.1.1.6.5 Group Resource Allocation Scrambling 3-28 30 3.5.5.1.1.6.6 Position Assignment.3-28 31 3.5.5.1.1.6.7 Group Interlace Offset3-28 32 3.5.5.1.1.6.8 Concurrent Assignments3-29 33

49、 3GPP2 C.S0084-012-0 v1.0 CONTENTS vii 3.5.5.1.1.6.9 Mini MAC Index Assignment.3-29 1 3.5.5.1.1.6.10 Persistent Configurations .3-29 2 3.5.5.1.1.6.11 Group Switching.3-30 3 3.5.5.1.1.6.12 Group Properties Change3-30 4 3.5.5.1.1.6.13 F-DCH Transmission of GRA-Based Packets.3-30 5 3.5.5.1.1.6.13.1 Resource Availability Bitmap-Based Allocation .3-30 6 3.5.5.1.1.6.13.2 Access Terminal Presence Bitmap-Based Allocations 3-31 7 3.5.5.1.1.6.13.3 Residual Resource Allocation3-31 8 3.5.5.1.1.6.13.3.1 Mini MAC Field-Based Allocation .3-31 9 3.5.5.1.1.6.13.3.2 F-SCCH-Based Allocation 3-32 10 3.5.5