SANS 300639-2005 Fixed Radio Systems Point-to-point equipment Sub-STM-1 digital radio systems operating in the 13 GHz 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar a.pdf

《SANS 300639-2005 Fixed Radio Systems Point-to-point equipment Sub-STM-1 digital radio systems operating in the 13 GHz 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar a.pdf》由会员分享，可在线阅读，更多相关《SANS 300639-2005 Fixed Radio Systems Point-to-point equipment Sub-STM-1 digital radio systems operating in the 13 GHz 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar a.pdf（27页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 33.060.30 ISBN 0-626-17392-2 SANS 300639:2005Edition 1 ETSI EN 300639:2001Edition V1.3.1SOUTH AFRICAN NATIONAL STANDARD Fixed Radio Systems; Point-to

4、-point equipment; Sub-STM-1 digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing This national standard is the identical implementation of ETSI EN 300639:2001 and is adopted with the permission of the Europ

5、ean Telecommunications Standards Institute. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 300639:2005 Edition 1 ETSI EN 300639:2001 Edition V1

6、.3.1 Table of changes Change No. Date Scope Abstract Specifies the minimum performance parameters for terrestrial fixed services radio communications equipment for operation in the 13 GHz, 15 GHz and 18 GHz frequency bands. Keywords architecture, DRRS, PDH, radio, SDH, STM, transmission. National fo

7、reword This South African standard was approved by National Committee StanSA TC 74, Communication technology, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. In South Africa, spectrum band plans are regulated by the Independent Communicat

8、ions Authority of South Africa (ICASA). The South African Table of Frequency Allocations is obligatory for South Africa and will override any reference to frequency ranges as mentioned in this standard. ETSl EN 300 639 VI -3.1 (2001-02) European Standard (Telecommunications series) Fixed Radio Syste

9、ms; Point-to-point equipment; Sub-STM-1 digital radio systems operating in the 13 GHz, 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing ETSl EN 300 639 V1.3.1 (2001-02) Reference RENITM-04111-04 Keywords DRRS, radio, transmission, SDH, STM, PDH, arc

10、hitecture ETSl 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistree a la Sous-Prefecture de Grasse (06) No 7803188 Important notice Individual copies of the pres

11、ent document can be downloaded from: http:/www.etsi.orq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case

12、of dispute, the reference shall be the printing on ETSl printers of the PDF version kept on a specific network drive within ETSl Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and

13、other ETSl documents is available at http:/www.etsi.orq/tb/status/ If you find errors in the present document, send your comment to: editoretsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reprod

14、uction in all media O European Telecommunications Standards Institute 2001. All rights reserved. ETSl EN 300 639 V1.3.1 (2001-02) Contents Intellectual Property Rights 5 Foreword 5 1 Scope 6 2 References 7 3 Symbols and abbreviations 8 3.1 Symbols 8 3.2 Abbreviations 9 4 General characteristics 9 4.

15、1 Frequency bands and channel arrangements . 9 4.2 Types of installation 10 4.2.1 Environmental conditions . 10 4.2.1.1 Equipment within weather protected locations (indoor locations) . 10 4.2.1.2 Equipment for non-weather protected locations (outdoor locations) 10 4.3 Electromagnetic compatibility

16、conditions . 10 4.4 Mechanical requirements . 10 4.5 Power supply . 10 4.6 Telecommunications Management Network (TMN) interface . 10 4.7 Block diagram . 11 5 Baseband characteristics 11 5.1 Synchronous Digital Hierarchy (SDH) . 11 5.2 Plesiochronous Digital Hierarchy (PDH) 11 Transmitter characteri

17、stics . 12 Output power 12 Automatic Transmit Power Control (ATPC) 12 RF spectrum mask . 12 Discrete CW components exceeding the spectrum mask limit . 14 Spectral lines at the symbol rate . 14 Other spectral lines 14 Spurious emissions 15 Spurious emissions-external . 15 Spurious internal emissions

18、15 Radio frequency tolerance . 15 . . 7 Receiver characteristics . 16 7.1 Receiver image rejection . 16 7.2 Spurious emissions 16 . . 7.2.1 Spurious emissions-external . 16 7.2.2 Spurious emissions-internal . 16 7.3 Input level range 16 8 System characteristics . 16 8.1 Equipment background BER 16 8

19、.2 BER as a hnction of receiver input level . 17 8.3 Interference sensitivity 17 8.3.1 Co-channel interference sensitivity . 17 8.3.1.1 Co-channel interference sensitivity 17 8.3.2 Adjacent channel sensitivity . 18 8.3.2.1 Adjacent channel (at 28 or 27, 5 MHz channel spacing respectively in the 13,

20、15 GHz or 18 GHz ftequency band) interference sensitivity 18 8.3.2.2 Adjacent charnel (at 14 MHz charnel spacing in the 15 GHz frequency band) interference sensitivity . 19 8.3.3 Continuous Wave (CW) spurious interference 20 8.4 Distortion sensitivity . 20 ETSl 4 ETSl EN 300 639 V1.3.1 (2001 -02) An

21、nex A (informative): Additional information 21 A . 1 Branchingfeederlantenna requirement 21 A . 1.1 Antenna/Equipment/Feedes flanges 21 . A . 1.2 Cross-Polar Discrimination (XPD) 21 . A . 1.3 Intermodulation products 21 A . 1.4 Interport isolation 21 A . 1.5 Return loss 21 A.2 Automatic Transmit Pow

22、er Control (ATPC) . 22 A.3 Cross-Polar Interference Canceller (XPIC) 22 Annex B (informative): Bibliography . 23 . History 24 ETSl Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essentia

23、l IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3 14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs not$ed to ETSI in respect ofETSIstandards“, which is available from the ETSI Secretariat. Latest updates are a

24、vailable on the ETSI Web server (http:/www.etsi.or,o/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3 14 (or the updates on the ETSI Web server) w

25、hich are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmission and Multiplexing (TM). The present document contains the minimum technical requirements to ensure compatibilit

26、y of products and conformance with radio regulations across the European states of interest to ETSI Member. Radio terminals from different manufacturers are not required to interwork at radio frequency (i.e. no common air interface). The present document defines the requirements of radio terminal an

27、d radio relay equipment and associated interfaces. The requirements for multiplex, network management and antennalfeeder equipment may be addressed elsewhere. The former title of the present document was: “Transmission and Multiplexing (TM); Sub-STM1 Digital Radio Relay Systems (DRRS) operating in t

28、he 13 GHz, 15 GHz and 18 GHz frequency bands with about 28 MHz co-polar and 14 MHz cross-polar channel spacing“. National transposition dates Date of adoption of this EN: 16 February 2001 Date of latest announcement of this EN (doa): 31 May 2001 Date of latest publication of new National Standard or

29、 endorsement of this EN (dople): 30 November 200 1 Date of withdrawal of any conflicting National Standard (dow): 30 November 200 1 1 Scope The present document specifies the minimum performance parameters for terrestrial fixed services radio communications equipment, as given below, for operation i

30、n the 13 GHz, 15 GHz and 18 GHz frequency bands (i.e. 12,75 GHz to 13,25 GHz, 14,50 GHz to 15,351 GHz and 17,70 GHz to 19,70 GHz). The equipments covered by the present document are intended for operation with about 28 MHz basic channel spacing with frequency re-use either in 14 MHz interleaved mode

31、 or in co-channel mode (definitions are in ITU-R Recommendation F.746-4 26). The present document covers equipment for the transmission of sub-Synchronous Transport Module level-1 (STM-I) digital signals with a Virtual Container-3 (VC-3) payload capacity. The standardization of sub-STM-1 radio syste

32、ms for 13 GHz, 15 GHz and 18 GHz bands has been prepared to ensure the compatibility with the existing plesiochronous and the new synchronous systems concerning frequency plans and performance. The architecture and functional aspects should be in accordance with ITU-R Recommendation F.750-3 7 and tr

33、ansmission characteristics and performance requirements in accordance with ITU-R Recommendation F.75 1-2 8. The present document does not cover aspects related to test procedures and test conditions which are currently under study in TM4. The application of these Digital Radio Relay Systems (DRRS) i

34、s anticipated to be for point-to-point links in local, regional and national networks, mobile base station connections and customer access links. Consideration has to be given to special requirements of the local network (e.g. simple towers with less space for antenna, different network structures w

35、ith high density nodes). The systems considered in the present document are intended to operate on average hop lengths about 15 km for 1 8 GHz band, 20 km for 15 GHz band and 30 krn for 13 GHz band. Equipment should be designed in order to meet network performance and availability requirements defin

36、ed by ITU-T Recommendations G.82 1 17 and G.826 IS, following the criteria defined in ITU-RRecommendations F.634-4 3, F.695 30, F.696-2 5, F.697-2 6, F.1092-1 28 and F.1189-1 29, for high or medium or local grade or the international or the national portion of the digital connection. The parameters

37、to be specified fall into two categories: a) those that are required to provide compatibility between Radio Frequency (RF) channels occupied by different sources of equipment on the same route connected either: - to separate antennas; or - to separate polarization of the same antenna. b) parameters

38、defining the transmission quality of the proposed system. The standardization deals with Intermediate Frequency (IF), RF and baseband characteristics relevant to sub-STM-1 Synchronous Digital Hierarchy (SDH) transmission. Spurious emissions and ElectroMagnetic Compatibility (EMC) requirements are al

39、so included in the present document. Safety aspects are outside the mandate of ETSI and they will not be considered in the present document References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are eithe

40、r specific (identified by date of publication andlor edition number or version number) or non-speci fic. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. I ITU-R Recommendation F.497-6: “Radio-frequency channel arrangements for ra

41、dio-relay systems operating in the 13 GHz frequency band“. 21 ITU-R Recommendation F.595-6: “Radio-frequency channel arrangements for radio-relay systems operating in the 1 8 GHz frequency band“. 31 ITU-R Recommendation F.634-4: “Error performance objectives for real digital radio-relay links formin

42、g part of the high-grade portion of international digital connections at a bit rate below the primary rate within an integrated services digital network“. 41 ITU-R Recommendation F.636-3: “Radio-frequency channel arrangements for radio-relay systems operating in the 15 GHz band“. 51 ITU-R Recommenda

43、tion F.696-2: “Error performance and availability objectives for hypothetical reference digital sections forming part or all of the medium-grade portion of an ISDN connection at a bit rate below the primary rate utilizing digital radio-relay systems“. 61 ITU-R Recommendation F.697-2: “Error performa

44、nce and availability objectives for the local- grade portion at each end of an ISDN connection at a bit rate below the primary rate utilizing digital radio-relay systems“. 71 ITU-R Recommendation F.750-3: “Architectures and hctional aspects of radio-relay systems for synchronous digital hierarchy (S

45、DH)based networks “. 81 ITU-R Recommendation F.75 1-2: “Transmission characteristics and performance requirements of radio-relay systems for SDH-based networks“. 91 ITU-T Recommendation G.703: “Physicallelectrica1 characteristics of hierarchical digital interfaces“. lo ITU-T Recommendation G.707: “N

46、etwork node interface for the synchronous digital hierarchy (SDH)“. Ill ITU-T Recommendation G.708: “Sub STM-0 network node interface for the synchronous digital hierarchy (SDH)“. I21 ITU-T Recommendation G.773: “Protocol suites for Q-interfaces for management of transmission systems“. I31 ITU-T Rec

47、ommendation G.78 1 : “Synchronization layer functions“ I41 ITU-T Recommendation G.782: “Types and general characteristics of synchronous digital hierarchy (SDH) equipment“ 151 ITU-T Recommendation G.783: “Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks“. I61 ITU-T

48、Recommendation G.784: “Synchronous digital hierarchy (SDH) management“ IT ITU-T Recommendation G.821: “Error performance of an international digital connection operating at a bit rate below the primary rate and forming part of an integrated services digital network“. 8 ETSl EN 300 639 V1.3.1 (2001-0

49、2) ITU-T Recommendation G.826: “Error performance parameters and objectives for international, constant bit rate digital paths at or above the primary rate“. ITU-T Recommendation G.957: “Optical interfaces for equipments and systems relating to the synchronous digital hierarchy“. CEPTIERC Recommendation 74-01 : “Spurious Emissions“ ETSI EN 300 385: “Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for fixed radio links and ancillary equipment“. ETSI ETS 300 132: “Equipment Engineering