SANS 1242-2008 Pantihose and knee-highs《(女士)连裤袜和齐膝袜》.pdf

《SANS 1242-2008 Pantihose and knee-highs《(女士)连裤袜和齐膝袜》.pdf》由会员分享，可在线阅读，更多相关《SANS 1242-2008 Pantihose and knee-highs《(女士)连裤袜和齐膝袜》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21316-9 SANS 1242:2008Edition 2.2Any reference to SABS 1242 is deemedto be a reference to this standard(Government Notice No. 1373 of 8 No

4、vember 2002)SOUTH AFRICAN NATIONAL STANDARD Pantihose and knee-highs Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 1242:2008 Edition 2.2 Table

5、 of changes Change No. Date Scope Coll. amdt No. 1 1999 Amended to replace references to SABS methods, which have been withdrawn and superseded, with references to SABS ISO methods. The SABS ISO methods cover colourfastness and quantitative textile fibre analysis. Amdt 2 2008 Amended to change the d

6、esignation of SABS standards to SANS standards, to update the definition of “acceptable“ and to delete a referenced standard. Foreword This South African standard was approved by National Committee StanSA SC 5110.05D, Clothing and made-up articles Hose and pantihose, in accordance with procedures of

7、 Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in May 2008. This document supersedes SABS 1242:1996 (edition 2). A vertical line in the margin shows where the text has been technically modified by amendment Nos 1 and 2. Annex A forms an inte

8、gral part of this document. Annexes B, C and D are for information only. SANS 1242:2008 Edition 2.2 1 Contents Page Foreword 1 Scope . 3 2 Normative references . 3 3 Definitions 3 4 Requirements for materials and components 3 5 Requirements for pantihose and knee-highs . 4 6 Inspection and methods o

9、f test 7 6.1 Inspection 7 6.2 Conditioning of test samples and sequence of testing . 7 6.3 Dimensions . 7 6.4 Fibre composition 7 6.5 Colourfastness to washing 8 7 Packing and marking . 8 Annexes A Notes to purchasers . 9 B Care and maintenance of pantihose or knee-highs . 9 C Guidance for manufactu

10、rers and purchasers of pantihose or knee-highs . 10 D Quality verification of pantihose or knee-highs 11 E Bibliography 11 SANS 1242:2008 Edition 2.2 2 This page is intentionally left blank SANS 1242:2008 Edition 2.2 3 Pantihose and knee-highs 1 Scope This standard specifies the materials and make o

11、f pantihose and knee-highs. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. All standards are subject to revision and, since any reference to a standard is deemed to be a reference to the latest edition

12、of that standard, parties to agreements based on this standard are encouraged to take steps to ensure the use of the most recent editions of the standards indicated below. Information on currently valid national and international standards can be obtained from Standards South Africa. SANS 70, Condit

13、ioning of textiles and standard temperate atmosphere for determining their physical and mechanical properties. SANS 105-C10/ISO 105-C10, Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda. Coll. amdt 1 SANS 5766, Measurement of girth and length extende

14、d dimensions of pantyhose. SANS 10004, Terms and definitions for textiles and textile merchandise. 3 Definitions For the purposes of this standard, the definitions given in SANS 10004 and the following definition apply: acceptable acceptable to the authority administering this standard or to the par

15、ties concluding the purchase contract, as relevant Amdt 2 4 Requirements for materials and components 4.1 Knitting yarns 4.1.1 Composition Pantihose and knee-highs (excluding the waistband or welt, as relevant), when tested in accordance with 6.4, shall have been made from 100 % continuous-filament

16、textured polyamide 6.6 yarns. SANS 1242:2008 Edition 2.2 4 4.1.2 Linear density and number of filaments The linear density and the number of filaments of the textured yarns1)used in the manufacture of pantihose and knee-highs shall be as agreed upon (see clause A.2 of annex A). 4.2 Threads used in m

17、aking-up The sewing thread used in the making-up1)of pantihose and knee-highs, when tested in accordance with 6.4, shall be a continuous-filament synthetic thread. 4.3 Waistband and welt The waistband and welt shall be of any type, which may include elastomeric yarn(s) that has/have enough elasticit

18、y to enable the pantihose or knee-highs to comply with the relevant requirements of 5.4.2. 5 Requirements for pantihose and knee-highs 5.1 General Pantihose shall be made in accordance with sound manufacturing practice; free from defects that affect their appearance, or that might affect their servi

19、ceability, or both; such that any difference between the unstretched lengths of the two halves is acceptable; and such that the seams and the thread are sufficiently extensible to obviate seamcracking or seam breakdown when subjected to the tension used to determine the panty dimensions (see 6.3). K

20、nee-highs shall be made in accordance with sound manufacturing practice; free from defects that affect their appearance, or that might affect their serviceability, or both; and supplied in pairs, and so paired that any difference between the unstretched lengths of the two knee-highs that form a pair

21、 is acceptable. 5.2 Make of pantihose The panty part of the pantihose shall have been formed by slitting lengthwise the portions, marked “a“ in figure 1, of two identical leg blanks and then joining the leg blanks together by seaming, either with or without the inclusion of a gusset2), as required (

22、see A.1(a) of annex A). NOTE The supply of pantihose without gussets might not be practicable in the full range of sizes. 1) Recommendations for suitable textured yarns for the manufacture of pantihose and knee-highs and for sewing threads, are given in annex C. 2) Recommendations on the provisions

23、of suitable gussets are given in annex C. SANS 1242:2008 Edition 2.2 5 Figure 1 Pantihose 5.3 Colour The colour of pantihose or knee-highs shall be an acceptable match to the colour required (see A.1(b) of annex A). 5.4 Size, type and dimensions 5.4.1 Size and type 5.4.1.1 Pantihose Pantihose shall

24、be supplied in one (or more) of the sizes and, in the case of extra super large, the types listed in table 1, as required (see A.1(c) of annex A). A thread of the appropriate colour and that is bright enough to provide a strong contrast with that of the pantihose shall be knitted into the waistband

25、of each pair of pantihose to indicate its size as follows: Size Colour Small Yellow Medium Red Large Green Extra large Blue Super large Black Extra super large Orange 5.4.1.2 Knee-highs Knee-highs shall be of one of the types given in table 2, as required (see A.1(d) of annex A). 5.4.2 Dimensions of

26、 pantihose and knee-highs When determined in accordance with 6.3, the dimensions of the pantihose shall conform to the appropriate values given in columns 2 to 8 of table 1 and the dimensions of the knee-highs shall conform to the appropriate values given in column 2 or 3 of table 2. SANS 1242:2008

27、Edition 2.2 6 Table 1 Dimensions of pantihose Dimensions in millimetres1 2 3 4 5 6 7 8 Requirements Size Extra super large1)Dimensions Small Medium Large Extra large Super large Type A Type B Waistband girth, range 63 to 72 63 to 72 63 to 72 63 to 72 68 to 77 85 to 98 85 to 98 Waistband depth, min.

28、3 3 3 3 3 3 3 Panty, micromesh Length, range Width, range 45 to 51 71 to 79 50 to 56 71 to 79 55 to 61 71 to 79 59 to 67 74 to 82 66 to 75 79 to 89 72 to 84 88 to 102 63 to 732)98 to 1142)Leg, 2-stage reduction type Length, range Width (thigh), range 165 to 185 41 to 45 182 to 20241 to 45 201 to 223

29、41 to 45 216 to 23842 to 46 226 to 25042 to 47 230 to 256 42 to 49 230 to 25642 to 49 Foot width, range 28 to 32 28 to 32 28 to 32 28 to 32 29 to 33 29 to 33 29 to 33 Toe depth, range 3 to 5 3 to 5 3 to 5 3 to 5 3 to 5 3 to 5 3 to 5 1) See annex C for further information. 2) With a full panel insert

30、ed. Table 2 Dimensions of knee-highs Dimensions in millimetres1 2 3 Requirements Dimensions1)Type 1 Type 2 A. Welt, range 31 to 35 31 to 35 B. Calf, range 32 to 36 32 to 36 C. Leg length, range 86 to 94 103 to 106 D. Foot width, range 27 to 31 27 to 31 E. Toe depth, range 3 to 5 3 to 5 1) See figure

31、 2. SANS 1242:2008 Edition 2.2 7 Figure 2 Knee-highs 5.5 Colourfastness to washing The numerical ratings for change in colour and for staining of transfer cloths, determined in accordance with 6.5, shall not be lower than 3 to 4. 6 Inspection and methods of test 6.1 Inspection After inspecting the s

32、ample for compliance with the requirements of clause 7, inspect all the pantihose or knee-highs in the sample for compliance with the requirements given in 5.1, 5.2, 5.3 and 5.4.1. 6.2 Conditioning of test samples and sequence of testing Before testing them, condition all test samples in accordance

33、with SANS 70, and then carry out the tests of 6.3 to 6.5 (inclusive) in the order in which they are given. 6.3 Dimensions With the sample laid flat and in a relaxed state, use a suitably graduated rule to determine the depth of the waistband. Fit the pantihose or knee-high on an appropriate leg-form

34、 (which usually comes with the machine used to determine other dimensions) and use a suitably graduated rule to determine the toe depth at the widest point, then use SANS 5766 to determine the other dimensions. Report any seam cracking or seam breakdown that occurs on any of the test specimens (see

35、5.1). 6.4 Fibre composition Determine by microscopical examination and chemical analysis of representative yarns and threads. SANS 1242:2008 Edition 2.2 8 6.5 Colourfastness to washing Use SANS 105-C01. Coll. amdt 1 7 Packing and marking 7.1 Packing Pantihose or knee-highs shall be acceptably packed

36、 either individually or in multiple packs, as required, (see A.1(e) of annex A), in an envelope of suitable material and size. Only pantihose or knee-highs of the same size or type and of the same colour shall be packed together in a multiple pack and, unless otherwise required, in a bulk container

37、(see A.1(f) of annex A). 7.2 Marking 7.2.1 Envelopes The following information shall appear on the outside of each envelope: a) the manufacturers name or trade mark, or both; b) in the case of pantihose, the size on, or alongside, a block of colour which matches the colour of the size-identification

38、 thread in the waistband; c) in the case of knee-highs and extra super large pantihose, the type; d) the colour(s); e) instructions for the care and maintenance of pantihose or knee-highs (see annex B); and f) in the case of multiple packs, the amount of pantihose or knee-highs. 7.2.2 Containers The

39、 following information shall appear in legible and indelible marking on the outside of each bulk container, and shall be visible when the containers are stacked: a) the information required in terms of 7.2.1(a), (b), (c) and (d); b) a verbal description, for example “Pantihose“; and c) the amount of

40、 pantihose or knee-highs. 7.2.3 Additional marking When so required (see A.1(g) of annex A), envelopes or bulk containers, or both, shall bear information additional to that specified in 7.2.1 and 7.2.2. SANS 1242:2008 Edition 2.2 9 Annex A (normative) Notes to purchasers A.1 The following requireme

41、nts shall be specified in tender invitations and in each order and contract: a) whether the pantihose are to be supplied with or without a gusset (see 5.2); b) the colour (see 5.3); c) in the case of pantihose, the size and, in the case of the extra super large size, the type (see 5.4.1.1); d) in th

42、e case of knee-highs, the type (see 5.4.1.2); e) whether pantihose or knee-highs are to be supplied in single or multiple packs (see 7.1); f) whether pantihose of more than one size may be packed in a bulk container (see 7.1); and g) additional marking, if required (see 7.2.3). A.2 The following req

43、uirement shall be agreed upon between the purchaser and the supplier: the linear density and the number of filaments of the knitting yarns (see 4.1.2). Annex B (informative) Care and maintenance of pantihose or knee-highs The following are suggested instructions for the care and maintenance of panti

44、hose or knee-highs: Wash the pantihose or knee-highs with soap in lukewarm water, rinse well, and squeeze out the water without distorting the pantihose or knee-highs. Do not dry them in the sun or in front of a heater. SANS 1242:2008 Edition 2.2 10 Annex C (informative) Guidance for manufacturers a

45、nd purchasers of pantihose or knee-highs C.1 Pantihose or knee-highs that comply with the requirements of this standard have been produced by the use of the following: C.1.1 Yarns The yarns have a crimp rigidity3)of not less than 48 % and are of the following linear densities: a) for normal qualitie

46、s: 1) for the panty section of pantihose: 33 dtex f 10; and 2) for the legs: 17 dtex f 5 or 20 dtex f 7; b) for heavier qualities: 1) for the panty section of pantihose: 44 dtex f 13; and 2) for the legs: 33 dtex f 10. C.1.2 Structure Micromesh structure is used in the panty part of pantihose. (This

47、 provides greater widthwise extensibility than a plain jersey fabric.) C.1.3 Sewing thread The sewing threads used are continuous-filament synthetic threads of a linear density sufficient to give the required seam strength and extensibility. C.2 When the required extensibility and dimensions of pant

48、ihose cannot be otherwise attained, the sewing-in of one of the following types of gusset is recommended: a) for normal sizes: a gusset of suitable dimensions and that is sewn in at the crotch; and b) for the larger sizes: a panel gusset, i.e. either 1) a long gusset with parallel sides that extends

49、 over half of the crotch length at the back of the pantihose, or 2) a full panel gusset that extends over the whole of the crotch length (front to back). C.3 The finishing procedure, known as “semi-boarding“, increases the resistance to snagging, improves the appearance, and preserves elasticity. C.4 In the case of extra super large pantihose, this size has been subdivided into two types, which differ in terms of the dimensions of the panty section (see tab