SAE AS 39029 86A-2011 Contacts electrical connector socket crimp removable thermocouple (for AS50151 AS34501 series and MIL-DTL-83723 series II connectors)《热电偶压盖可拆式插座电气连接器触头(适用于AS5.pdf

《SAE AS 39029 86A-2011 Contacts electrical connector socket crimp removable thermocouple (for AS50151 AS34501 series and MIL-DTL-83723 series II connectors)《热电偶压盖可拆式插座电气连接器触头(适用于AS5.pdf》由会员分享，可在线阅读，更多相关《SAE AS 39029 86A-2011 Contacts electrical connector socket crimp removable thermocouple (for AS50151 AS34501 series and MIL-DTL-83723 series II connectors)《热电偶压盖可拆式插座电气连接器触头(适用于AS5.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) AS39029/86Copyright 2011 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system

2、 or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesa

3、e.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2000-07REAFFIRMED 2006-10 REVISED 2011-01THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.AFEDERAL SUPPLY CLASS 5935 AS39029/86SHEET 1 OF 4REV. APROCUREMENT SPECIFICATION: AS39029SAE Technical Standards Board Rules provide that: “This report ispublish

4、edby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least ev

5、ery five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS39029/86ARATIONALE REVISE TO INCLUDE COMMENTS RECEIVED BY TH

6、E GOVERNMENT AND INDUSTRY, REMOVE GOVERNMENT JARGON, UPDATE REFERENCES, ALIGN SPECIFICATION WITH SAE GUIDELINES, AND REVIEW SPECIFICATION FOR KNOWN TECHNICAL PROBLEMS. THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS

7、39029. FIGURE 1 - SOCKET CONTACT Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS39029/86SHEET 2 OF 4REV. A(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUP

8、LE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) TABLE 1 - DIMENSIONS BIN CODE A B DDIAEDIAFDIAGDIAJDIAKMREF NDIAR S T 510THRU 513.300(7.62) .290(7.37) .082(2.08) .070(1.78) .042(1.07) .036(.91) .068(1.73) .066(1.68) .133(3.38) .130(3.30) .103(2.62).101(2.57).113(2.87).106(2.69

9、).280(7.11).250(6.35).911(23.14) .068(1.72) .065(1.65) N/A.666(16.92).656(16.66).560(14.22).399(10.13)462THRU 4651.101(27.97).856(21.74).846(21.49).560(14.22).430(10.92)466THRU 469.102(2.59) .098(2.49) .189(4.80) .186(4.72) .150(3.81).147(3.73).161(4.09).154(3.91).100(2.54) .097(2.46) .160(4.06) .15

10、5(3.94) .710(18.03).587(14.91)TABLE 2 - DESIGN CHARACTERISTICS BIN CODE COLOR BANDS MATING ENDSIZEWIREBARREL SIZE TYPE CLASS 1ST 2ND 3RD 510 GREEN BROWN BLACK 16S 16 SEE TABLE 4 FOR COMPOSITION B511 GREEN BROWN BROWN 16S 16 B 512 GREEN BROWN RED 16S 16 B 513 GREEN BROWN ORANGE 16S 16 B 462 YELLOW BL

11、UE RED 16 16 B 463 YELLOW BLUE ORANGE 16 16 B 464 YELLOW BLUE YELLOW 16 16 B 465 YELLOW BLUE GREEN 16 16 B 466 YELLOW BLUE BLUE 12 12 B 467 YELLOW BLUE VIOLET 12 12 B 468 YELLOW BLUE GRAY 12 12 B 469 YELLOW BLUE WHITE 12 12 B TABLE 3 - TOOLS BINCODE BASIC CRIMPING TOOL POSITIONER INSTALLINGTOOL REMO

12、VAL TOOL 462THRU 465 M22520/1-01 M22520/7-01 M22520/1-02 BLUEM22520/7-03 M81969/8-07 M81969/14-03 M81969/8-08 M81969/14-03 510THRU 513466THRU 469M22520/1-01 M22520/1-02 YELLOW M81969/8-09 M81969/14-04 M81969/8-10 M81969/14-04 Copyright SAE International Provided by IHS under license with SAENot for

13、ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS39029/86SHEET 3 OF 4REV. A(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) TABLE 4 - MATERIALS, PLATING, AND TE

14、NSILE STRENGTH BIN CODE MATERIALS PLATING TENSILE STRENGTH 1/WIRE SIZE AXIAL LOAD (LBS) WIRE SIZE AXIAL LOAD(LBS) WIRE SIZE AXIAL LOAD(LBS) 510 JN NONE 16 33 18 23 20 14 511 KN NONE 512 KP NONE 513 JP CADMIUM PLATE 2/462 JN NONE 16 33 18 23 20 14 463 KN NONE 464 KP NONE 465 JP CADMIUM PLATE 2/466 JN

15、 NONE 12 85 14 53 16 33 467 KN NONE 468 KP NONE 469 JP CADMIUM PLATE 2/1/ APPLIES TO TYPE 1 WIRE PER MIL-DTL-5846 2/ CHROMATE CLEAR COAT TABLE 5 - PART NUMBER AND BIN CODE BINCODE PARTNUMBER SUPERSEDED PART NUMBER 510 M39029/86-510 511 M39029/86-511 512 M39029/86-512 513 M39029/86-513 462 M39029/86-

16、462 M39029/861616C1 463 M39029/86-463 M39029/861616C2 464 M39029/86-464 M39029/861616C3 465 M39029/86-465 M39029/861616C4 466 M39029/86-466 M39029/861212C1 467 M39029/86-467 M39029/861212C2 468 M39029/86-468 M39029/861212C3 469 M39029/86-469 M39029/861212C4 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSI

17、ST OF THIS SPECIFICATION AND THE LATEST ISSUE OF AS39029. 1. DESIGN: CONTACTS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1, TABLES 1 AND 2. DIMENSIONS ARE IN INCHES, METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY. DIMENSIONS SHOWN APPLY AFTER PLATING. THE K BORE SHALL NOT BREAK THROUGH T

18、O THE T BORE. THE MAXIMUM ALLOWABLE GAP BETWEEN THE HOOD AND THE BODY OF THE CONTACT IS .010 INCHES. UNLESS OTHERWISE SPECIFIED, SURFACE FINISH SHALL BE 63 MICROINCHES. 2. TOOLS: TOOLS REQUIRED FOR CRIMPING CONTACTS TO THE WIRE/CABLE AND THE INSTALLING/REMOVAL FROM THE CONNECTOR SHALL BE IN ACCORDAN

19、CE WITH TABLE 3. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS39029/86SHEET 4 OF 4REV. A(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151

20、AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS) 3. PART NUMBERS: CONTACT PART NUMBERS SHALL BE IN ACCORDANCE WITH TABLE 5. SUPERSEDED PART NUMBERS ARE AS SPECIFIED. 4. MATERIALS AND PLATING: SEE TABLE 4. 5. MECHANICAL: MECHANICAL PROPERTIES SHALL BE IN ACCORDANCE WITH AS39029. TENSILE STRENGT

21、H SHALL BE AS SHOWN IN TABLE 4. 6 ELECTRICAL: NOT REQUIRED. 7. ENVIRONMENTAL: ENVIRONMENTAL PROPERTIES SHALL BE IN ACCORDANCE WITH AS39029. APPLICATION NOTES 1. CONTACT MATES DIRECTLY WITH AN AS39029/85 PIN CONTACT AS SHOWN IN TABLE 6. TABLE 6. CONTACT MATING PART NUMBERS AS39029/86 BIN CODE MATING

22、AS39029 SLASH SHEET/BIN CODE M39029/86-510, -462 M39029/85-454 M39029/86-511, -463 M39029/85-455 M39029/86-512, -464 M39029/85-456 M39029/86-513, -465 M39029/85-457 M39029/86-466 M39029/85-458M39029/86-467 M39029/85-459M39029/86-468 M39029/85-460M39029/86-469 M39029/85-4612. THE COMPOSITION DESIGNAT

23、IONS HAVE BEEN CHANGED AS LISTED BELOW: JN = TYPE J NEGATIVE (FORMERLY CONSTANTAN) KN = TYPE K NEGATIVE (FORMERLY ALUMEL) KP = TYPE K POSITIVE (FORMERLY CHROMEL) JP = TYPE J POSITIVE (FORMERLY IRON) SPECIFICATION NOTES NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERI

24、AL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEF

25、T OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-