REG MSFC-STD-3012 REV A-2012 Electrical Electronic Electromechanical (EEE) Parts Management and Control Requirements for MSFC Space Flight Hardware.pdf

《REG MSFC-STD-3012 REV A-2012 Electrical Electronic Electromechanical (EEE) Parts Management and Control Requirements for MSFC Space Flight Hardware.pdf》由会员分享，可在线阅读，更多相关《REG MSFC-STD-3012 REV A-2012 Electrical Electronic Electromechanical (EEE) Parts Management and Control Requirements for MSFC Space Flight Hardware.pdf（188页珍藏版）》请在麦多课文档分享上搜索。

1、 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf MSFC-STD-3012 National Aeronautics and REVISION A Space Administration EFFECTIVE DATE: February 14, 2012 George C. Marshall Space Flight Center Marshall Spa

2、ce Flight Center, Alabama 35812 ES43 MSFC TECHNICAL STANDARD ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE Approved for Public Release; Distribution is Unlimited MEASUREMENT SYSTEM IDENTIFICATION Provided by IHSNot for Re

3、saleNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effective Date: February 14, 2012 Page: 2 of 188 CHECK THE MASTER LISTVERI

4、FY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf DOCUMENT HISTORY LOG Status (Baseline/ Revision/ Canceled) Document Revision Effective Date Description Baseline 11/29/99 Initial Release Revision A 2/14/2012 Revision A released; do

5、cument authorized through MPDMS. Changed name of document from “EEE Parts Management and Control for MSFC Space Flight Hardware” to “Electrical, Electronic, Electromechanical (EEE) Parts Management and Control Requirements for MSFC Space Flight Hardware.” Renumbered paragraphs throughout document as

6、 necessary. Added/deleted/updated documents in Section 2.0. Added/deleted/updated definitions, acronyms, and abbreviations in Section 3.0. Added Table I, EEE Part Types in paragraph 4.1. Renumbered baseline document Table I EEE Parts Grade Description and Table II Comparison of EEE Parts Grades to T

7、able II and Table III, respectively, and updated contents of both tables. Moved baseline document Table 3 Derating Guidelines to Appendix A; updated derating criteria for several part types. Edited contents of Table IV Hazard Avoidance. Added Pure Tin Finish Avoidance Section 5.4.4.1. Added Section

8、5.4.5 Cuprous Oxide (Red Plague) Control. Added reference to the NASA Parts Selection List (NPSL) to paragraph 5.5.1 and several locations throughout the document. Added paragraph 5.5.5 Plastic Encapsulated Microcircuits (PEMs) and Appendix B Instructions for Plastic Encapsulated Microcircuit (PEM)

9、Selection, Screening, Qualification and Derating. Updated baseline Section 5.5.3 for the verification of parts, defining more detailed requirements, and moved it to section 6.0. Moved baseline paragraph 5.5.2 Part Substitutions to paragraph 5.5.6. Updated baseline paragraph 5.6.5 Traceability requir

10、ements and moved to paragraph 5.5.7; added paragraph 5.5.7.1 Traceability for Grade 4. Added 5.6.4 EEE Parts Application (Derating) Analysis. Renamed baseline paragraph 5.7.1 “Lifetime Parts Availability” as “Parts Availability” and moved to paragraph 5.7.3. Added paragraphs 5.7.1 Obsolescence Manag

11、ement and 5.7.2 Counterfeit EEE Parts Avoidance to address new requirements of NPD 8730.2C. Added paragraph 5.8.7 Reuse of EEE Parts. Replace baseline section 5.9 Off-The-Shelf Assemblies Requirements with 5.9 Heritage Hardware and Off-the-Shelf (OTS) Hardware Requirements. Updated selection and scr

12、eening Tables V, VI, VII, and VIII for Grades 1, 2, 3, and 4 parts, respectively. Updated/added/renumbered screening/qualification Tables IX through XV; new tables added include Table IX, Requirements for Upgrade Screening and Qualification for Discrete Semiconductors for Use in Grade 1 Applications

13、; Table XII, Requirements for Screening of Microcircuits; and Table XIII, Requirements for the Qualification of Microcircuits. Updated Grade 1, 2, 3, and 4 boilerplates and moved from Appendices A through B to Appendices C through F, respectively. Provided by IHSNot for ResaleNo reproduction or netw

14、orking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effective Date: February 14, 2012 Page: 3 of 188 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT

15、 VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf FOREWORD 1. This Standard establishes a uniform set of requirements for electrical, electronic, and electromechanical (EEE) parts selection, management, and control for space flight and mission essential groun

16、d support equipment for Marshall Space Flight Center (MSFC) programs. The parts requirements described in this document are to be selectively applied based on equipment grade and mission needs as specified in the Project Specification. Individual equipment needs should be evaluated to determine the

17、extent to which each requirement should be applied. 2. This Standard: a. Establishes four quality levels (Grade 1, 2, 3, & 4) for EEE parts. b. Establishes EEE parts selection, and control requirements and provides in appendices a suggested approach for each of the above quality levels implementatio

18、n. c. Establishes responsibility for documenting parts selection, qualification, and parts related data. 3. Questions concerning the application of this Standard shall be referred to the MSFC EEE Parts Engineering. 4. Beneficial comments and suggestions for improving this Standard may be submitted t

19、o the Office of Primary Responsibility (MSFC EEE Parts Engineering). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-S

20、TD-3012 Revision: A Effective Date: February 14, 2012 Page: 4 of 188 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf TABLE OF CONTENTS PARAGRAPH PAGE DOCUMENT HISTORY LOG .2 FOREWORD .3 1.0 SCOPE .8 1.1 Im

21、plementation 8 1.2 Applicability 8 2.0 APPLICABLE DOCUMENTS .8 2.1 General 8 3.0 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS 17 3.1 Definitions .17 3.2 Acronyms and Abbreviations 19 4.0 GENERAL .22 4.1 Selection of EEE Part Grade .22 4.1.1 Grade 1 .23 4.1.2 Grade 2 .23 4.1.3 Grade 3 .24 4.1.4 Grade 4 .

22、24 5.0 EEE PARTS SELECTION AND CONTROL REQUIREMENTS.24 5.1 Parts Management and Control Requirements Document 24 5.1.1 Parts Control Document Scope 24 5.1.2 Implementation .24 5.1.3 Affected Parts .27 5.1.4 Structure .27 5.2 Qualification Requirements .27 5.2.1 Piece Part Level 27 5.2.2 Assembly Lev

23、el 27 5.3 Quality Assurance Requirements 27 5.3.1 Procurement Sources 27 5.3.2 Quality Conformance Inspection (QCI) .28 5.3.3 Screening 28 5.3.4 Receiving Inspection 29 5.3.5 Quality Assurance Data 29 5.3.6 Government Industry Data Exchange Program 29 5.4 Application Criteria Requirements 29 5.4.1 D

24、erating 29 5.4.2 Operating Environment 30 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effecti

25、ve Date: February 14, 2012 Page: 5 of 188 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf 5.4.3 Ionizing Radiation 30 5.4.4 Hazard Avoidance 30 5.4.5 Cuprous Oxide (Red Plague) Control 31 5.5 Configuration

26、 Control Requirements 33 5.5.1 Part Selection 33 5.5.2 Standard and Nonstandard Parts .33 5.5.3 Specifications and Control Drawings .33 5.5.4 Waivers and Deviations 34 5.5.5 Plastic Encapsulated Microcircuits (PEMs) .34 5.5.6 Part Substitutions 34 5.5.7 Traceability .34 5.6 Parts Related Data Requir

27、ements 35 5.6.1 EEE Parts Management Plan 35 5.6.2 As-Designed EEE Parts List .35 5.6.3 Nonstandard Part Approval 35 5.6.4 EEE Parts Application (Derating) Analysis .36 5.6.5 As-Built EEE Parts List 36 5.7 Obsolescence Management, Counterfeit Avoidance, and Parts Availability Requirements .36 5.7.1

28、Obsolescence Management 36 5.7.2 Counterfeit EEE Parts Avoidance 36 5.7.3 Parts Availability 37 5.8 Manufacturing and Handling Requirements .37 5.8.1 Electrostatic Discharge (ESD) Control 37 5.8.2 Environmental Control .37 5.8.3 Part Age and Storage Restriction .37 5.8.4 Allowance for Testing Fallou

29、t 37 5.8.5 Manufacturing Process Compatibility 38 5.8.6 Suspect Parts .38 5.8.7 Reuse of EEE Parts .38 5.9 Heritage Hardware and Off-the-Shelf (OTS) Hardware Requirements 38 5.9.1 Heritage Hardware .38 5.9.2 Off-The-Shelf (OTS) Hardware Requirements 39 5.10 Ground Support Equipment (GSE) to Flight H

30、ardware Electrical Interfaces .39 6.0 REVIEW, AUDIT, AND VERIFICATION OF PARTS REQUIREMENTS 39 6.1 Review of Parts Management and Control Requirements Documents .39 6.2 Audit of EEE Parts Process Requirements 39 6.3 Verification of EEE Parts Circuit Design Requirements 39 Provided by IHSNot for Resa

31、leNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effective Date: February 14, 2012 Page: 6 of 188 CHECK THE MASTER LISTVERIFY

32、 THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf TABLE PAGE I. EEE PART TYPES 22 II. EEE PARTS GRADE DESCRIPTION .23 III. COMPARISON OF EEE PART GRADES .25 IV. HAZARD AVOIDANCE 30 V. STANDARD PARTS AND SELECTION PREFERENCES FOR GRADE

33、 1 .41 VI. STANDARD PARTS AND SELECTION PREFERENCES FOR GRADE 2 .55 VII. STANDARD PARTS AND SELECTION PREFERENCES FOR GRADE 3 .70 VIII. STANDARD PARTS AND SELECTION PREFERENCES FOR GRADE 4 .80 IX. REQUIREMENTS FOR UPGRADE SCREENING AND QUALIFICATION OF DISCRETE SEMICONDUCTORS FOR USE IN GRADE 1 APPL

34、ICATIONS .83 X. FUSE SCREENING 86 XI. COMPLIANCE WITH MIL-STD-981 REQUIREMENTS FOR PARTS QUALIFIED TO CERTAIN MILITARY SPECIFICATIONS 87 XII. REQUIREMENTS FOR SCREENING OF MICROCIRCUITS 90 XIII. REQUIREMENTS FOR THE QUALIFICATION OF MICROCIRCUITS.92 XIV. THERMISTOR SCREENING REQUIREMENTS .94 XV. THE

35、RMISTOR QUALIFICATION REQUIREMENTS 98 APPENDIX PAGE A. DERATING REQUIREMENTS .105 B. INSTRUCTIONS FOR PLASTIC ENCAPSULATED MICROCIRCUIT (PEM) SELECTION, SCREENING, QUALIFICATION AND DERATING .129 C. BOILERPLATE - ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIR

36、EMENTS DOCUMENT FOR GRADE 1 PARTS .155 D. BOILERPLATE - ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS DOCUMENT FOR GRADE 2 PARTS .163 E. BOILERPLATE - ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS DOCUMEN

37、T FOR GRADE 3 PARTS .171 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effective Date: February

38、 14, 2012 Page: 7 of 188 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf F. BOILERPLATE - ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS DOCUMENT FOR GRADE 4

39、PARTS 179 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirements for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effective Date: February 14, 2012 Page:

40、 8 of 188 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf 1.0 SCOPE This Standard sets forth the selection, testing, and application requirements that each Project Manager shall use (tailor) to manage and

41、control the electrical, electronic, and electromechanical (EEE) parts activities for MSFC space flight and mission essential ground support equipment in accordance with NPD 8730.2. 1.1 Implementation While the actual selection of EEE parts is an engineering process, the detailed implementation into

42、project baselines of the selected EEE parts shall be accomplished by the process as defined in the Project Configuration Management Plan. Should a conflict arise between this Standard and the Project Configuration Management Plan, the Project Configuration Management Plan shall govern. 1.2 Applicabi

43、lity This publication applies to MSFC programs using EEE parts for flight hardware. 2.0 APPLICABLE DOCUMENTS 2.1 General The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issue in effect on the date of

44、invitation for bids or requests for proposal shall apply. For canceled, inactive or superseded documents listed in this section, the latest revision prior to the canceled or superseded document shall be used. If compliance to the canceled, inactive or superseded document is not practical, the supers

45、eding document or other proposed documents must be approved by the project prior to use. ANSI/ESD S20.20 Development of an Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices) ANSI/NEM

46、A WC27500 Cable, Power, Electrical and Cable Special Purpose, Electrical Shielded and Unshielded, General Specification for ANSI/NEMA-MW-1000 Magnet Wire ASTM B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire EEE-INST-002 GSFC Instructions for EEE Parts Selection, Screening,

47、 Qualification, and Derating GEIA-STD-0006 Requirements for Using Solder Dip to Replace the Finish on Electronic Piece Parts Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MSFC Technical Standard ES43 Title: EEE Parts Management and Control Requirem

48、ents for MSFC Space Flight Hardware Document No.: MSFC-STD-3012 Revision: A Effective Date: February 14, 2012 Page: 9 of 188 CHECK THE MASTER LISTVERIFY THAT THIS IS THE CORRECT VERSION BEFORE USE AT https:/repository.msfc.nasa.gov/docs/multiprogram/MSFC-STD-3012.pdf J-STD-001E Requirements for Sold

49、ered Electrical and Electronic Assemblies J-STD-001ES Space Applications Electronic Hardware Addendum to Institute of Interconnecting and Packaging Electronic Circuits (IPC) J-STD-001E J-STD-004 Requirements for Soldering Fluxes J-STD-005 Requirements for Soldering Pastes J-STD-006 Requirements for Electronic Grade Solder Alloys and Fluxed and No