KS R ISO 14396-2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in acc.pdf

《KS R ISO 14396-2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in acc.pdf》由会员分享，可在线阅读，更多相关《KS R ISO 14396-2006 Reciprocating internal combustion engines-Determination and method for the measurement of engine power-Additional requirements for exhaust emission tests in acc.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 KSKSKSKS SKSKSKS KSKSKS SKSKS KSKS SKS KS 2006 12 29 http:/www.kats.go.krKS R ISO 14396 ISO 8178 KS R ISO 14396： 2006 (2011 ) R ISO 14396： 2006 : ( ) ( ) () ( ) : (http:/www.standard.go.kr) ： ： 2006 12 29 ： 2011 12 27 2011-0713 ： ： ( 02- 509-72713) (http:/ www.kats.go.kr). 10 5 , . ICS 27.020 KS R

2、ISO ISO 8178 14396： 2006(2011 )Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission tests in accordance with ISO 8178 2002 1 ISO 14396 Reciprocating internal combustion engines Determination and method for

3、 the measurement of engine power Additional requirements for exhaust emission tests in accordance with ISO 8178 . 1. ISO 8178 , “ ” ISO 15550 . , . . , . , , . “ ” “ ” ISO 15550 . 2. . . KS M ISO 3104 KS M ISO 5165 ISO 3675 Crude petroleum and liquid petroleum products Laboratory determination of de

4、nsity Hydrometer method ISO 5164 Motor fuels Determination of knock characteristics Research method ISO 15550 Reciprocating internal combustion engines Determination and method for the measurement of engine power General requirements ASTM D240 00 Standard Test Method for Heat of Combustion of Liquid

5、 Hydrocarbon Fuels by Bomb Calorimeter ASTM D3338 00 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels 3. 1 ISO 15550 . R ISO 14396： 2006 2 1 (ISO 15550 ) (declared engine speed) 3.2.4 (declared intermediate engine speed) 3.2.5 (declared power) 3.3.1 (engine adjustment)

6、 3.2.1 ISO 8178 (engine power for ISO 8178) 3.3.3.3 (engine speed) 3.2.3 (engine speed at maximum torque) 3.2.7 (fuel delivery) 3.4.2 (load) 3.3.11 (power correction) 3.3.10 (production conformity test) 3.5.4 (special test) 3.5.3 . , 60 % 75 % , . 60 % , 60 % . 75 % , 75 % . , 60 % 70 % . 4. ISO 155

7、50 2 . ISO 15550 3 . 5. ISO 15550 5. . 6. 6.1 ISO 15550 6.3 2 . 6.2 ISO 15550 6.3.4.1 6.3.4.14 . a) “ ” , . ( ) , ISO 15550 1 5 . ISO 15550 1 5 . . . R ISO 14396： 2006 3 . 3 % . b) ISO 8178 ISO 8178 . , ISO 15550 12 . ( ) , ISO 15550 6.3.4.11 b) . 313 K37+(1)(2) . (1) . (2) , . 6.3 ISO 15550 6.3.5 .

8、 , . 2 . ( ) , . 7. 7.1 ISO 15550 7. . 7.2 (1) . 298 K(25 ) , ISO 15550 7.3 7.4.2 (0) ( ). 8. ISO 15550 8. . ISO 8178 . 9. 9.1 ISO 15550 9.2.2.1 9.2.2.2 9.2 9.3 . R ISO 14396： 2006 4 ： ： ： ： ： a) kPa b) kPa c) kPa ： ： Pa ： ： a) K b) K c) (3) K (3) Kd) K e) / (3) K K ： ： ： ： ： ： ISO 5164 (RON)(4)： IS

9、O 5164 (MON)(4)： (oxygenates) ( ) ： % (ISO 3675 ) 288 K (4)： g cm 3(ASTM D240 00 ) (3) (ASTM D3338 00 ) (3)： kJ/kg ： ： ： kPa ： kPa ： kJ/kg R ISO 14396： 2006 5 ： ： (KS M ISO 5165 ) (4)： (KS M ISO 3104 ) 40 ： mm2s 1(ISO 3675 288 K ) ： g cm 3(ASTM D240 00 ) (3) (ASTM D3338 00 ) (3)： kJ/kg ： ： / ： ： kJ/

10、kg ： ： SAE ： (3) . (4) ASTM . 9.2 2 . R ISO 14396： 2006 6 2 min 1 Nm kW (a) g s 1 kPa kPa K (fa) (a) g s 1 (A) kW 1 kW 2 kW ISO 15550： _ 1 , (ISO 15550 9.2.2.1.12 9.2.2.2.13 )3 kW (B) kW 1 kW 2 kW ISO 15550： _ 4.( 1 ) , 3 kW (C) kW ISO 8178 (A) (B) (C) kW ISO 8178 Nm (b) g kWh 1 / (c) K K (c) K K (c

11、K (c) kPa (c) kPa Pa kPa (c) mm3 (a) , . . , . (b) . (c) . 10. 10.1 ( ) 2 % 0.3 kW 4 % . 10.2 , 5 % . R ISO 14396： 2006 7 1 ISO 5163： 1990 Motor and aviation type fuels Determination of knock characteristics Motor method 2 ISO 8178 1 Reciprocating internal combustion engines Exhaust emission measure

12、ment Part 1： Test-bed measurement of gaseous and particulate exhaust emissions 3 ISO 8178 2 Reciprocating internal combustion engines Exhaust emission measurement Part 2： Measurement of gaseous and particulate exhaust emissions at site 4 ISO 8178 3 Reciprocating internal combustion engines Exhaust e

13、mission measurement Part 3： Definitions and methods of measurement of exhaust gas smoke under steady state conditions 5 ISO 8178 4 Reciprocating internal combustion engines Exhaust emission measurement Part 4： Test cycles for different engine applications 6 ISO 8178 5 Reciprocating internal combusti

14、on engines Exhaust emission measurement Part 5： Test fuels 7 KS R ISO 8178 6 6 ： 8 ISO 8178 7 Reciprocating internal combustion engines Exhaust emission measurement Part 7： Engine family determination 9 ISO 8178 8 Reciprocating internal combustion engines Exhaust emission measurement Part 8： Engine

15、group determination 10 ISO 8178 9 Reciprocating internal combustion engines Exhaust emission measurement Part 9： Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 11 KS R ISO 8178 10 10 ： 8 K

16、S R ISO 14396： 2006 ISO 8178 , . 1. 1.1 ISO 8178 , “ ” ISO 15550 ISO 14396： 2002 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission tests in accordance with ISO 8178 . 1.2 ISO 14396 ISO . 2. ISO 8178 , “

17、 ” ISO 15550 . 3. 3.1 ISO 15550： 2002 8. . ISO 8178 . 4. . . 041-559-3052 054-530-5402 031-899-3116 GM 032-520-2777 031-369-0285 031-610-3304 041-350-1217 ISO 8178 153787 1 92 3(13) (02)26240114 (02)262401489 http:/ KSKSKSSKSKS KSKS SKS KSKS SKSKS KSKSKSKorean Agency for Technology and Standards http:/www.kats.go.kr KS R ISO 14396： 2006 Reciprocating internal combustion engines Determination and method for the measurement of engine powerAdditional r equirements for exhaust emission tests in accordance with ISO 8178 ICS 27.020