GMKOREA EDS-T-2311-2005 ACCELERATOR PEDAL DURABILITY.pdf

《GMKOREA EDS-T-2311-2005 ACCELERATOR PEDAL DURABILITY.pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-T-2311-2005 ACCELERATOR PEDAL DURABILITY.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto & Technology EDS Engineering, GM DAEWOO Auto & Technology. Standards ACCELERATOR PEDAL DURABILITY EDS-T-2311 ISSUED DATE: 1995. 10. 02 REVISED DATE: 2005. 12. 22 VERSION: 3 EDS-T-2311 ACCELERATOR PEDAL DURABILITY PAGE: 1/2 ISSUED DATE: 1995. 10. 02 REVISED DATE: 2005. 12. 22 VERSION:

2、3 GM DAEWOO Auto & Technology 1. PURPOSE Evaluate durability of accelerator pedal. 2. EQUIPMENT 2.1. Durability Test stand for accelerator pedals like photo of 2 page 2.2. Pneumatically controlled tester 3. TEST CONDITION 3.1. SPL quantity : 3 3.2. Actuating speed : 60CPM 3.3. Mounting condition Tes

3、ting under almost the same condition as in the vehicle include cable and throttle body (The cable and throttle body are able to replace suitable JIG) 3.4. Adjust cylinder position and stroke in order to be actuated freely, actuator pedal is operating under almost the same condition as in the vehicle

4、. 3.5. The pedal is push to become W.O.T(WIDE OPEN THROTTLE) (Load in pedal about 6 10 kgf) 4. BOGY 1,000,000 cycles 5. EVALUATION 5.1. No crack, deformation 5.2. No abnormal wear of joint area EDS-T-2311 ACCELERATOR PEDAL DURABILITY PAGE: 2/2 ISSUED DATE: 1995. 10. 02 REVISED DATE: 2005. 12. 22 VERSION: 3 GM DAEWOO Auto & Technology DURABILITY TEST STAND FOR ACCELATOR PEDALS