GMKOREA EDS-A-1013-2008 DRAWING NOTES.pdf

《GMKOREA EDS-A-1013-2008 DRAWING NOTES.pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-A-1013-2008 DRAWING NOTES.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto D v : j . - PART MUST FIT OR MATCH SURFACE OF MATCHG PART AS SPECIFIED. - : 7 7 x Oq j . - DETAILS NOT GIVEN ARE CHOSEN TO SUIT THE PURPOSE. - 7 % K; MASTER MODEL L j . - PART SHAPE MUST COMPLY WITH APPROVED MASTER MODEL. - , D ( DWMC | L j . - COLOR, GRAIN AND GLOSS LEVEL TO MATCH MA

2、STER SAMPLE SIPPLIED BY DWMC. - X (3 $ ? D | 8 5 j . - THE COLOR CODE REFER TO THE RESPECTIVE MASTER SAMPLE FOR COLOR AND DEGREE OF GLOSS. - m D $ | 8 n3 j . - THE VISIBLE AREAS OF THE FINAL PART MUST BE ACCORDING TO THIS MASTER SAMPLE. - x 7 ( D * K (v j . - TEMPLATE TO BE TAKEN FROM TRUE SCALE COP

3、Y OF ORIGINAL DRAWING. EDS-A-1013DRAWING NOTES PAGE: 7/10 ISSUED DATE: 1996. 03. 19 REVISED DATE: 2008. 05. 31 VERSION: 4 GM DAEWOO Auto 8 xxxxxxxxxxx 2 L . - THIS PART IS THE SAME AS xxxxxxxxxxx EXCEPT PARTS MARKED . - 7 r7 (v 8 5 j . - INFORMATION NOT SHOWN TO BE TAKEN FROM DRAWING. - 7 r7 3D CAD

4、MODEL 8 5 j . - INFORMATION NOT SHOWN TO BE TAKEN FROM 3D CAD MODEL. - Z v J; y D x j . - ALL DIMENSIONS APPLY TO PART PRIOR TO SURFACE TREATMENT. - Z h L j . - ALL DIMENSIONS ARE GUAGE DIMENSIONS. - 1 D C; x j . - ALL DIMENSIONS APPLY TO FINISHED PART AFTER SURFACE TREATMENT. - : 7 D $ 0 * (v n3 j

5、. - POSITIONAL TOLERANCE FOR NON DIMENSIONED FROM TO TRUE SCALE DRAWING. - 1 d A E / 7 xxxxx I L j . - REDUCTION OF MATERIAL THICKNESS xxxxx MAX. AFTER FORMING. - 4 7 xxx j . - UNSPECIFIED ALL INSIDE BEND AND CORNER RADII xxx. - EDS-A-1202 xxxNote) n3 j . - EDGES TO EDS-A-1202 xxx Note)Edges symbol.

6、 - EDS-T-7804 D j . - ENVIRONMENTAL PROTECTION TO EDS-T-7804. 5.4. Notes for Surface treatments, Materials and Test methods 5.4.1. Indication method of Surface treatments - v J; : xxxxNote1)(EDS-X-XXXX)Note2)- SURFACE TREATMENT : xxxx(EDS-X-XXXX)Note1)Surface treatment symbol. Note 2)Relevant standa

7、rds number. Ex) SURFACE TREATMENT : ZnP-A3(EDS-M-3101) 5.4.2. Indication method of Materials - d : xxxxNote)EDS-A-1013DRAWING NOTES PAGE: 10/10 ISSUED DATE: 1996. 03. 19 REVISED DATE: 2008. 05. 31 VERSION: 4 GM DAEWOO Auto & Technology - MATERIAL : xxxxNote)Indication method of Material conform to c

8、oding system specified in EDS material standards. Ex) MATERIAL : SPCC(EDS-M-1101) In case of metal materials MATERIAL : EDS-M-4151-11 In case of plastic materials. MATERIAL : EDS-M-6101 In case of trim or rubber materials. 5.4.3. Indication method of Test methods - xxxxxxNote1)& 7 EDS-T-XXXXNote2)3

9、E j . (In case of components tests) - xxxxxx TEST TO EDS-T-XXXX Note1)Relevant test designation Note2)Relevant standards number. Ex) KEY CYLINER ASSEMBLY TEST TO EDS-T-3211. - xxxxxxNote1)& 7 EDS-T-7XXXNote2)-xxxxxNote3)E j .(In case of material tests) - xxxxxx TEST TO EDS-T-7XXX-xxxxx Note1)Relevan

10、t test designation. Note2)Relevant standards number. Note3)Requirements for relevant test. Ex) IMPACT RESISTANCE TEST TO EDS-T-7503-A3-MIN3J. COMPRESSION SET TO EDS-T-7424-C-50% MAX. - xxxxxxNote1)& 7 EDS-T-XXXXNote2) xxx Note3)8 Z & 8 E j . - xxxxxx TEST TO EDS-T-XXXX EXCEPT CLAUSE xxx Note1)Releva

11、nt test designation. Note2)Relevant standards number. Note3)Relevant clause in the relevant standard. Ex) MATERIAL TEST TO EDS-T-7007 EXCEPT CLAUSE 5.10 - & z 7 8 EDS-T-XXXXNote1)8 E j . - TEST SPEC. TO EDS-T-XXXX EXCEPT FOR FOLLOWING ITEMS. Note1)Relevant standards number. Ex) TEST SPEC. TO EDS-T-3211 EXCEPT FOR FOLLOWING ITEMS. 6. RELATED STANDARDS EDS-A-1006 Technical drawing - letters EDS-A-1016 Symbols on drawing EDS-A-2003 Standard for part name designation