FORD WSS-M4C127-A-2010 GASOLINE UNLEADED INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《无铅电泳原漆汽油 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD WSS-M4C127-A-2010 GASOLINE UNLEADED INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《无铅电泳原漆汽油 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M4C127-A-2010 GASOLINE UNLEADED INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《无铅电泳原漆汽油 与福特WSS-M99P1111-A 一起使用》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 11 16 Revised Revised: title, scope, supplement, 3., 3.2, 3.6, 3.9, 3.11, 3.12, 3.14, 3.17, 3.18 Deleted: 3.7, 3.10, 3.15 Inserted: 3.2.1, 3.2.2, 3.12.1, 3.12.2 C.E. Richardson, NA 2007 10 17 Revised Deleted 3.3, 3.4,3.5, 3.10.2 , 3.13; R

2、evised: 3.2, 3.4, 3.7.1, 3.7.2, 3.8, 3.10.1, 3.17, 3.19, 4.2 Inserted 3.12.1; C. E. Richardson 2004 09 15 Activated C. E. Richardson Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 3 GASOLINE, UNLEADED, INITIAL FILL WSS-M4C127-A 1. SCOPE The material defined b

3、y this specification is a well-refined unleaded gasoline. 2 APPLICATION This specification was released originally for gasoline used for initial fill in North America. 3 REQUIREMENTS These materials must meet the most recently approved requirements of ASTM D4814 Standard Specification for Automotive

4、 Spark-Ignition Engine Fuel and/or comply with local, state and regional fuel regulations of plants location, plus the following: 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-

5、M99P1111-A). 3.2 OCTANE 3.2.1 ANTIKNOCK INDEX, (RON + MON)/2, min 87.0 (ASTM D 2699, ASTM D 2700) 3.2.2 RESEARCH OCTANE NUMBER, min 91.0 (ASTM D 2699) 3.6 SULFUR CONTENT, max 80.0 ppm (ASTM D 5453) 3.8 FERROUS CORROSION (ASTM D 665, Procedure A at 4 hr.), min B+ 3.9 OXIDATION STABILITY, min 900 minu

6、tes (ASTM D 525) 3.11 AROMATICS (see 3.12) 3.12 ETHANOL CONTENT (ASTM D 4815) 3.12.1 Aromatic content of fuel is 10% volume 0 - 10.5% volume 3.12.2 Aromatic content of fuel is 10% volume 9.5 - 10.5% volume ENGINEERING MATERIAL SPECIFICATIONWSS-M4C127-APrinted copies are uncontrolled Copyright 2010,

7、Ford Global Technologies, LLC Page 2 of 3 3.14 INTAKE VALVE CLEANLINESS, max (ASTM D5500) or 100 mg/valve, max (ASTM D6201) 50 mg/valve, max 3.16 COLOR May include a dye in accordance with standard practice for purpose of vendor and user identification. 3.17 ADDITIVES Fuels shall contain normal comm

8、ercial additives at concentrations representative of good commercial practice in the receiving locale (unless otherwise specified). Metallic additives, including lead, manganese and phosphorus are not allowed. Use of oxygenate additives other than ethanol must be approved by Fuels and Lubricants Eng

9、ineering. Supplier must identify additive formulation which includes additive type and concentration on specification supplement. 3.18 CERTIFICATION Supplier shall certify that the gasoline is a formulation that meets Ford Motor Company requirements as stated in these specifications. Technical evide

10、nce of these data and manufacturing limits must be summarized as specified on the specification supplement. This certification shall be given by the authorized supplier representative and submitted to Ford Fuels and Lubricants Engineering activity for approval. Ford Fuels and Lubricants Engineering

11、may request additional data from supplier as needed to confirm conformance to specification. 4. GENERAL INFORMATION: The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 FLAMMABILITY This material represents a potential fire

12、hazard. The Manufacturing Engineering Department shall notify both the Plant Security and the Safety Units of its presence in the Plant to assure that proper fire precautions are provided. The location in which it is used or stored shall be included in the notifications. 4.2 SAMPLING AND SUBMISSION

13、OF SAMPLES (ASTM D 4057/ASTM D 4177) ENGINEERING MATERIAL SPECIFICATIONWSS-M4C127-APrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 3 Supplement Company _Terminal Location _ Product _ Seasonal Grade _ Inspection Result Blending Limits Research Octane _ _ Motor

14、Octane _ _ (R+M)/2 _ _ Sulfur, mg/kg _ _ Copper Strip Corrosion _ _ Silver Strip Corrosion _ _ Ferrous Corrosion _ _ Oxidation Stability, minutes _ _ Vapor Pressure, kPa _ _ Vapor/Liquid Ratio, TVL20, C _ _ Ethanol content, % _ _ Oxygen content, % _ _ Aromatics, % volume _ _ Olefins, % volume _ _ Un

15、washed Gum, mg/100 mL _ _ Solvent Washed Gum, mg/100 mL _ _ Distillation Range 10% Evaporated, C _ _ 50% Evaporated, C _ _ 90% Evaporated, C _ _ End Point, C _ _ Additives Description Concentration, ppm Detergent _ _ Antioxidant _ _ Corrosion inhibitor _ _ Metal Deactivator _ _ _ _ _ _ _ _ Comments: _ Signature _ Title _ Date _