FORD WSS-M1H1061-A-2008 FABRIC DINAMICA MICROFIBER NON WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《DINAMICA图案的微纤维不分层无纺布 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSS-M1H1061-A-2008 FABRIC DINAMICA MICROFIBER NON WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《DINAMICA图案的微纤维不分层无纺布 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1061-A-2008 FABRIC DINAMICA MICROFIBER NON WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《DINAMICA图案的微纤维不分层无纺布 与标准FORD WSS-M99P1111-A一起使用 》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 10 22 Activated M. Montgomery, FOE Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DINAMICA, MICROFIBER, NON WOVEN WSS-M1H1061-A UNLAMINATED 1. SCOPE The material defined by this specifica

2、tion is a Non Woven Polyester Microfiber face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2008 C307 RS Program. Limitations: The fabric is not recommended for heavy trucks and commercial vehicles. 3. REQUIREMENTS In ad

3、dition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-

4、A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Weight, +/- 5% (FLTM BN 106-01) 300 g/m2 3.3 COMPOSITION (ASTM D 629) Polyester: 92% +/- 1% Polyurethane: 8% +/- 1% 3.4 YARN COMPOSITION (ASTM D 1244) Face : Micro Fiber 100% Polyester 0.15 denier (140 g/m2) Scrim :100% Polyester 150 denier (95 g/m2) Backing

5、: FR polyester 0.5 denier 90% , Microfiber Polyester 0.15 denier 10% (total : 61 g/m2) Recycled content : Face 100% PCR Fiber; Back 10% PCR Fiber ENGINEERING MATERIAL SPECIFICATION WSS-M1H1061-APrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DY

6、EING Piece Dyed 3.5.1 Types of Dyes Disperse Dyestuff 3.6 FINISHED OPERATIONS 3.6.1 Anti-Stain and Water Repellent Finishing 3.6.2 Surface Impregnation Treatment Dipping: Weight 4 g/m24. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Minimum finished width 137cm Maximum finished width 142 cm