FORD WSS-M1H1010-A-2008 FABRIC DEL REY PATTERN KNIT TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《使用防水终饰材料处理的针织DEL REY图案面料(与FORD WSS-M99P1111-A一起使用)》.pdf

《FORD WSS-M1H1010-A-2008 FABRIC DEL REY PATTERN KNIT TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《使用防水终饰材料处理的针织DEL REY图案面料(与FORD WSS-M99P1111-A一起使用)》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1010-A-2008 FABRIC DEL REY PATTERN KNIT TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《使用防水终饰材料处理的针织DEL REY图案面料(与FORD WSS-M99P1111-A一起使用)》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 2 2008 08 19 Revised Revised Title and paragraph 1 M. Dumitrescu, FNA 2006 05 22 Activated M. Dumitrescu, FNA Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DEL REY PATTERN, KNIT WSS-M1H

2、1010-A TREATED WITH REPELLANT FINISH 1. SCOPE The material defined by this specification is a DEL REY PATTERN, 4 bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. The fabric is treated with repellant finish to prevent staining. 2. APPLICATION This specification was rel

3、eased originally for material used as an interior trim fabric for 2008 D333 seat bolster. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/

4、A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 138 wales/10 cm Co

5、urses 291 courses/10 cm 3.2.2 Fabric Weight, range, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 450 614 312 - 345 * 3 mm foam thickness ENGINEERING MATERIAL SPECIFICATION WSS-M1H1010-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.3 COMPOSITION

6、(ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 7.8 tex (natural text polyester) (B) 7.8 tex (natural polyester) Middle 7.8 tex (natural polyester) Back 11.1 tex (natural Polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Wash, Preset, Dye, Heatset, Inspect Note: the fabric is treated with repellant finish to prevent staining caused by water based agents