ETSI TS 186 005-1-2009 Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN) Terminating Identification Presentation (TIP) and Terminati.pdf

《ETSI TS 186 005-1-2009 Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN) Terminating Identification Presentation (TIP) and Terminati.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 186 005-1-2009 Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN) Terminating Identification Presentation (TIP) and Terminati.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 186 005-1 V2.1.1 (2009-02)Technical Specification Telecommunications and Internet Converged Services and Protocols for Advanced Networking (TISPAN);Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR);Part 1: Protocol Implementation Conformance Stat

2、ement (PICS)ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)2Reference RTS/TISPAN-06045-1-NGN-R2 Keywords PICS, SIP, testing, TIP, TIR ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non l

3、ucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived differe

4、nce in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that

5、 the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/por

6、tal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUG

7、TESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for

8、 the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references .

9、5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Protocol Implementation Conformance Statement (PICS) proforma . 7g34.1 Instructions for completing the PICS proforma 7g34.1.1 More detailed instructions are given at the beginning of the

10、 different clauses of the PICS proforma. . 7g34.1.1.1 Purposes and structure. 7g34.1.2 Abbreviations and conventions . 8g34.2 Identification of the implementation 8g34.2.1 Date of the statement 9g34.2.2 Implementation Under Test (IUT) identification 9g34.2.3 System Under Test (SUT) identification 9g

11、34.2.4 Product supplier 9g34.2.5 Client 9g34.2.6 PICS contact person 9g34.3 PICS proforma tables . 9g34.3.1 Global statement of conformance . 9g34.3.2 Roles and network capabilities . 10g34.3.3 TIP/TIR user capabilities 10g3History 11g3ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)4Intellectual Property Ri

12、ghts IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essentia

13、l, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has bee

14、n carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Te

15、chnical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). The present document is part 1 of a multi-part deliverable covering the Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) as identified be

16、low: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)51 Sc

17、ope The present document specifies the Protocol implementation conformance statement (PICS) for the Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) NGN Basic Service, TS 183 008 10. A further part of the present document specifies the Abstract Test Suit

18、e (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the present document. Within the TISPAN NGN Release 1 Next Generation Network (NGN) the stage 3 description is specified using the IP Multimedia Call Control Protocol based on Session Initiation Proto

19、col (SIP) and Session Description Protocol (SDP). The TIP service provides the originating party with the possibility to receive a trusted (network-provided) identity of the terminating party, and is applicable to all session-based services of the NGN. The OIR service enables the terminating party t

20、o prevent presentation of any network-provided identity to the originating party, and is applicable to all session-based services of the NGN. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are e

21、ither specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the

22、expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the applicat

23、ion of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 181 002: “Telecommunications and Internet converged Services and Protocols for Advanced Networki

24、ng (TISPAN); Multimedia Telephony with PSTN/ISDN simulation services“. 2 ETSI ES 283 003: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); IP Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protoco

25、l (SDP) Stage 3 3GPP TS 24.229 Release 7, modified“. 3 ETSI EN 300 089: “Integrated Services Digital Network (ISDN); Calling Line Identification Presentation (CLIP) supplementary service; Service description“. 4 ETSI EN 300 090: “Integrated Services Digital Network (ISDN); Calling Line Identificatio

26、n Restriction (CLIR) supplementary service; Service description“. 5 IETF RFC 3323: “A Privacy Mechanism for the Session Initiation Protocol (SIP)“. 6 IETF RFC 3325: “Private Extensions to the Session Initiation Protocol (SIP) for Asserted Identity within Trusted Networks“. ETSI ETSI TS 186 005-1 V2.

27、1.1 (2009-02)67 IETF RFC 2396: “Uniform Resource Identifiers (URI): Generic Syntax“. 8 IETF RFC 3966: “The tel URI for Telephone Numbers“. 9 IETF RFC 3261: “SIP: Session Initiation Protocol“. 10 ETSI TS 183 008: “Telecommunications and Internet converged Services and Protocols for Advanced Networkin

28、g (TISPAN); PSTN/ISDN simulation services Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR); Protocol specification“. 11 Void. 12 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part

29、 1: General concepts“. 13 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. 14 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing m

30、ethodology and framework - Part 7: Implementation Conformance Statements“. 15 ETSI TS 183 004: “Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services: Communication Diversion (CDIV); Protocol specification“. 2.2 Informative r

31、eferences The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Defini

32、tions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: abstract test case: Refer to ISO/IEC 9646-1 12. Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 12. Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 12. implicit se

33、nd event: Refer to ISO/IEC 9646-3 13. lower tester: Refer to ISO/IEC 9646-1 12. Point of Control and Observation (PCO): Refer to ISO/IEC 9646-1 12. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 12. PICS proforma: Refer to ISO/IEC 9646-1 12. Protocol Implementation eXt

34、ra Information for Testing (PIXIT): Refer to ISO/IEC 9646-1 12. PIXIT proforma: Refer to ISO/IEC 9646-1 12. system under test: Refer to ISO/IEC 9646-1 12. Test Purpose (TP): Refer to ISO/IEC 9646-1 12. ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)73.2 Abbreviations For the purposes of the present document

35、, the following abbreviations apply: AS Application Server CLIP Calling Line Identification Presentation CLIR Calling Line Identification Restriction IP Internet Protocol ISDN Integrated Service Data Network IUT Implementaion Under Test n/a not applicable NGN Next Generation Network OIR Originating

36、Identification Restriction PSTN Public Switched Telephone Network SDP Session Description Protocol SIP Session Initiation Protocol SUT System Under Test TIP Terminating Identification Presentation TIR Terminating Identification Restriction URI Universal Resource Identifier 4 Protocol Implementation

37、Conformance Statement (PICS) proforma Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this clause so that it can be used for its intended purposes and may furt

38、her publish the completed PICS. 4.1 Instructions for completing the PICS proforma 4.1.1 More detailed instructions are given at the beginning of the different clauses of the PICS proforma. The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. If necessar

39、y, the supplier may provide additional comments separately in clause 5. 4.1.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in reference specifications 1 to 10 may provide information about the

40、 implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: instructions for completing the PICS proforma; identification of the implementation; identification of the reference protocol specification; PICS proforma tables (conta

41、ining the global statement of conformance). ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)84.1.2 Abbreviations and conventions The PICS proforma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 14. Item column: It contains a number that identifies the

42、 item in the table. Item description column: It describes each respective item (e.g. parameters, timers, etc.). Reference column: It gives reference to the TIP/TIR specification 10, except where explicitly stated otherwise. Status column: The following notations, defined in ISO/IEC 9646-7 14, are us

43、ed for the status column: m mandatory - the capability is required to be supported. n/a not applicable - in the given context, it is impossible to use the capability. No answer in the support column is required. o optional - the capability may be supported or not. o.i qualified optional - for mutual

44、ly exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“ or “n/a“) depends on the support

45、of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression that is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambiguities. If an ELSE clause is

46、 omitted, “ELSE n/a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in conformance to the specifications 1 to 10. Support column: The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC

47、9646-7 14, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A or n/a no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status). 4.2 Identification of the implementation Identifica

48、tion of the Implementation Under Test (IUT) and the system in which it resides - the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be fil

49、led in if they are different. A person who can answer queries regarding information supplied in the ICS should be named as the contact person. ETSI ETSI TS 186 005-1 V2.1.1 (2009-02)94.2.1 Date of the statement Date of the statement: 4.2.2 Implementation Under Test (IUT) identification IUT name: IUT version: 4.2.3 System Under Test (SUT) identification SUT name: Hardware configuration: Operating system: 4.2.4 Product supplier Name: Address: Telephone number: Facsimile number: Additional