ETSI TS 136 521-1-2017 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 1 Conformance tes.pdf

《ETSI TS 136 521-1-2017 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 1 Conformance tes.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 136 521-1-2017 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 1 Conformance tes.pdf（4260页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 136 521-1 V14.2.0 (2017-04) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Conformance testing (3GPP TS 36.521-1 version 14.2.0 Release 14) TECHNICAL SPECIFICATION ETSI 3GPP TS 36.521-1 versi

2、on 14.2.0 Release 14 1 ETSI TS 136 521-1 V14.2.0 (2017-04)Reference RTS/TSGR-0536521-1ve20 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la

3、Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document sha

4、ll not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI

5、Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present docum

6、ent, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by wri

7、tten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UM

8、TSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI 3G

9、PP TS 36.521-1 version 14.2.0 Release 14 2 ETSI TS 136 521-1 V14.2.0 (2017-04)Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI member

10、s and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.o

11、rg/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the p

12、resent document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being

13、references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “wil

14、l not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI 3GPP TS 36.521-1 version 14.2.0 Release 14 3 ET

15、SI TS 136 521-1 V14.2.0 (2017-04)Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 82g3Introduction 82g31 Scope 83g32 References 84g33 Definitions, symbols and abbreviations . 86g33.1 Definitions 86g33.2 Symbols 88g33.3 Abbreviations . 90g34 General . 93g34

16、.1 Categorization of test requirements in CA, UL-MIMO, Dual Connectivity, ProSe, UE category 0, UE category M1, UE category NB1 and V2X Communication) 94g34.2 RF requirements in later releases . 95g35 Frequency bands and channel arrangement 96g35.1 General . 96g35.2 Operating bands 96g35.2A Operatin

17、g bands for CA . 98g35.2B Operating bands for UL-MIMO . 106g35.2C Operating bands for Dual Connectivity 106g35.2D Operating bands for ProSe 107g35.2E Operating bands for UE category 0 and UE category M1 108g35.2F Operating bands for UE category NB1 . 108g35.2G Operating bands for V2X Communication .

18、 108g35.3 TXRX frequency separation . 109g35.3A TXRX frequency separation for CA . 109g35.4 Channel arrangement 110g35.4.1 Channel spacing 110g35.4.1A Channel spacing for CA 110g35.4.1F Channel spacing for UE category NB1 . 110g35.4.2 Channel bandwidth . 110g35.4.2.1 Channel bandwidths per operating

19、 band . 111g35.4.2A Channel bandwidth for CA . 113g35.4.2A.1 Channel bandwidths per operating band for CA . 115g35.4.2B Channel bandwidth for UL-MIMO . 153g35.4.2B.1 Channel bandwidths per operating band for UL- MIMO 153g35.4.2C Channel bandwidth for Dual Connectivity . 153g35.4.2D Channel bandwidth

20、 for ProSe . 153g35.4.2D.1 Channel bandwidths per operating band for ProSe . 153g35.4.2F Channel bandwidth for category NB1 154g35.4.2G Channel bandwidth for V2X Communication 155g35.4.2G.1 Channel bandwidths per operating band for V2X Communication 155g35.4.3 Channel raster . 155g35.4.3A Channel ra

21、ster for CA . 155g35.4.3F Channel raster for UE category NB1 155g35.4.4 Carrier frequency and EARFCN . 156g35.4.4F Carrier frequency and EARFCN for category NB1 158g36 Transmitter Characteristics . 159g36.1 General . 159g36.2 Transmit power 160g36.2.1 Void 160g3ETSI 3GPP TS 36.521-1 version 14.2.0 R

22、elease 14 4 ETSI TS 136 521-1 V14.2.0 (2017-04)6.2.2 UE Maximum Output Power 160g36.2.2.1 Test purpose 160g36.2.2.2 Test applicability . 160g36.2.2.3 Minimum conformance requirements . 160g36.2.2.4 Test description . 162g36.2.2.4.1 Initial condition . 162g36.2.2.4.2 Test procedure . 163g36.2.2.4.3 M

23、essage contents. 163g36.2.2.5 Test requirements 163g36.2.2_1 Maximum Output Power for HPUE . 165g36.2.2_1.1 Test purpose 165g36.2.2_1.2 Test applicability . 165g36.2.2_1.3 Minimum conformance requirements . 165g36.2.2_1.4 Test description . 165g36.2.2_1.5 Test requirements 166g36.2.2A UE Maximum Out

24、put Power for CA 167g36.2.2A.0 Minimum conformance requirements . 167g36.2.2A.1 UE Maximum Output Power for CA (intra-band contiguous DL CA and UL CA) 169g36.2.2A.1.1 Test purpose 169g36.2.2A.1.2 Test applicability . 169g36.2.2A.1.3 Minimum conformance requirements 169g36.2.2A.1.4 Test description .

25、 169g36.2.2A.1.5 Test Requirements . 171g36.2.2A.2 UE Maximum Output Power for CA (inter-band DL CA and UL CA) 172g36.2.2A.2.1 Test purpose 172g36.2.2A.2.2 Test applicability . 172g36.2.2A.2.3 Minimum conformance requirements 172g36.2.2A.2.4 Test description . 172g36.2.2A.2.5 Test Requirements . 174

26、g36.2.2A.3 UE Maximum Output Power for CA (intra-band non-contiguous DL CA and UL CA) 176g36.2.2B UE Maximum Output Power for UL-MIMO 176g36.2.2B.1 Test purpose 176g36.2.2B.2 Test applicability . 176g36.2.2B.3 Minimum conformance requirements . 176g36.2.2B.4 Test description . 178g36.2.2B.4.1 Initia

27、l condition . 178g36.2.2B.4.2 Test procedure . 179g36.2.2B.4.3 Message contents. 179g36.2.2B.5 Test requirements 179g36.2.2B_1 HPUE Maximum Output Power for UL-MIMO . 181g36.2.2B_1.1 Test purpose 181g36.2.2B_1.2 Test applicability . 181g36.2.2B_1.3 Minimum conformance requirements . 181g36.2.2B_1.4

28、Test description . 181g36.2.2B_1.5 Test requirements 182g36.2.2C 183g36.2.2D UE Maximum Output Power for ProSe 183g36.2.2D.0 Minimum conformance requirements . 183g36.2.2D.1 UE Maximum Output Power for ProSe Discovery . 183g36.2.2D.1.1 Test purpose 183g36.2.2D.1.2 Test applicability . 183g36.2.2D.1.

29、3 Minimum Conformance requirements . 183g36.2.2D.1.4 Test description . 183g36.2.2D.1.5 Test requirements 185g36.2.2D.2 UE Maximum Output Power for ProSe Direct Communication . 185g36.2.2D.2.1 Test purpose 185g36.2.2D.2.2 Test applicability . 185g36.2.2D.2.3 Minimum conformance requirements 185g36.2

30、.2D.2.4 Test description . 185g36.2.2E UE Maximum Output Power for UE category 0 . 186g36.2.2E.1 Test purpose 186g36.2.2E.2 Test applicability . 186g3ETSI 3GPP TS 36.521-1 version 14.2.0 Release 14 5 ETSI TS 136 521-1 V14.2.0 (2017-04)6.2.2E.3 Minimum conformance requirements . 186g36.2.2E.4 Test de

31、scription . 186g36.2.2E.4.3 Message contents . 187g36.2.2E.5 Test requirements 187g36.2.2EA UE Maximum Output Power for UE category M1 . 189g36.2.2EA.1 Test purpose 189g36.2.2EA.2 Test applicability . 189g36.2.2EA.3 Minimum conformance requirements . 189g36.2.2EA.4 Test description . 190g36.2.2EA.4.

32、3 Message contents . 191g36.2.2EA.5 Test requirements 191g36.2.2F UE Maximum Output Power for category NB1 . 192g36.2.2F.1 Test purpose 192g36.2.2F.2 Test applicability . 192g36.2.2F.3 Minimum conformance requirements . 192g36.2.2F.4 Test description . 193g36.2.2F.4.1 Initial condition . 193g36.2.2F

33、.4.2 Test procedure . 194g36.2.2F.4.3 Message contents. 194g36.2.2F.5 Test requirements 194g36.2.3 Maximum Power Reduction (MPR) . 194g36.2.3.1 Test purpose 195g36.2.3.2 Test applicability . 195g36.2.3.3 Minimum conformance requirements . 195g36.2.3.4 Test description . 195g36.2.3.4.1 Initial condit

34、ion . 195g36.2.3.4.2 Test procedure . 197g36.2.3.4.3 Message contents. 197g36.2.3.5 Test requirements 197g36.2.3_1 Maximum Power Reduction (MPR) for HPUE 199g36.2.3_1.1 Test purpose 199g36.2.3_1.2 Test applicability . 199g36.2.3_1.3 Minimum conformance requirements . 199g36.2.3_1.4 Test description

35、. 200g36.2.3_1.5 Test requirements 200g36.2.3_2 Maximum Power Reduction (MPR) for Multi-Cluster PUSCH . 200g36.2.3_2.1 Test purpose 200g36.2.3_2.2 Test applicability . 201g36.2.3_2.3 Minimum conformance requirements . 201g36.2.3_2.4 Test description . 201g36.2.3_2.4.1 Initial condition . 201g36.2.3_

36、2.4.2 Test procedure . 202g36.2.3_2.4.3 Message contents. 202g36.2.3_2.5 Test requirements 202g36.2.3_3 Maximum Power Reduction (MPR) for UL 64QAM . 203g36.2.3_3.1 Test purpose 204g36.2.3_3.2 Test applicability . 204g36.2.3_3.3 Minimum conformance requirements . 204g36.2.3_3.4 Test description . 204

37、g36.2.3_3.4.1 Initial condition . 204g36.2.3_3.4.2 Test procedure . 205g36.2.3_3.4.3 Message contents. 205g36.2.3_3.5 Test requirements 206g36.2.3_4 Maximum Power Reduction (MPR) for Multi-Cluster PUSCH with UL 64QAM . 208g36.2.3_4.1 Test purpose 208g36.2.3_4.2 Test applicability . 208g36.2.3_4.3 Mi

38、nimum conformance requirements . 208g36.2.3_4.4 Test description . 209g36.2.3_4.4.1 Initial condition . 209g36.2.3_4.4.2 Test procedure . 210g36.2.3_4.4.3 Message contents. 210g36.2.3_4.5 Test requirements 210g3ETSI 3GPP TS 36.521-1 version 14.2.0 Release 14 6 ETSI TS 136 521-1 V14.2.0 (2017-04)6.2.

39、3A Maximum Power Reduction (MPR) for CA . 211g36.2.3A.1 Maximum Power Reduction (MPR) for CA (intra-band contiguous DL CA and UL CA) . 211g36.2.3A.1.1 Test purpose 211g36.2.3A.1.2 Test applicability . 211g36.2.3A.1.3 Minimum conformance requirements 212g36.2.3A.1.4 Test description . 213g36.2.3A.1.5

40、 Test Requirements . 216g36.2.3A.1_1 Maximum Power Reduction (MPR) for CA (intra-band contiguous DL CA and UL CA) for UL 64QAM . 218g36.2.3A.1_1.1 Test purpose 219g36.2.3A.1_1.2 Test applicability . 219g36.2.3A.1_1.3 Minimum conformance requirements 219g36.2.3A.1_1.4 Test description . 220g36.2.3A.1

41、_1.5 Test requirement 222g36.2.3A.2 Maximum Power Reduction (MPR) for CA (inter-band DL CA and UL CA) . 223g36.2.3A.2.1 Test purpose 223g36.2.3A.2.2 Test applicability . 223g36.2.3A.2.3 Minimum conformance requirements 223g36.2.3A.2.4 Test description . 224g36.2.3A.2.5 Test Requirements . 228g36.2.3

42、A.2_1 Maximum Power Reduction (MPR) for CA (inter-band DL CA and UL CA) for UL 64QAM . 231g36.2.3A.2_1.1 Test purpose 231g36.2.3A.2_1.2 Test applicability . 231g36.2.3A.2_1.3 Minimum conformance requirements 231g36.2.3A.2_1.4 Test description . 232g36.2.3A.2_1.5 Test Requirements . 234g36.2.3A.3 Max

43、imum Power Reduction (MPR) for CA (intra-band non-contiguous DL CA and UL CA) . 235g36.2.3A.3.1 Test purpose 235g36.2.3A.3.2 Test applicability . 235g36.2.3A.3.3 Minimum conformance requirements 236g36.2.3A.3.4 Test description . 236g36.2.3A.3.5 Test Requirements . 238g36.2.3A.3_1 Maximum Power Redu

44、ction (MPR) for CA (intra-band non-contiguous DL CA and UL CA) for UL 64QAM . 238g36.2.3A.3_1.1 Test purpose 238g36.2.3A.3_1.2 Test applicability . 238g36.2.3A.3_1.3 Minimum conformance requirements 238g36.2.3A.3_1.4 Test description . 239g36.2.3A.3_1.5 Test Requirements . 240g36.2.3B Maximum Power

45、Reduction (MPR) for UL-MIMO . 240g36.2.3B.1 Test purpose 240g36.2.3B.2 Test applicability . 240g36.2.3B.3 Minimum conformance requirements . 241g36.2.3B.4 Test description . 241g36.2.3B.4.1 Initial condition . 241g36.2.3B.4.2 Test procedure . 242g36.2.3B.4.3 Message contents. 243g36.2.3B.5 Test requ

46、irements 243g36.2.3D UE Maximum Output Power for ProSe 245g36.2.3D.0 Minimum conformance requirements . 245g36.2.3D.1 Maximum Power Reduction (MPR) for ProSe Discovery 246g36.2.3D.1.1 Test purpose 246g36.2.3D.1.2 Test applicability . 246g36.2.3D.1.3 Minimum conformance requirements 246g36.2.3D.1.4 T

47、est description . 246g36.2.3D.1.4.1 Initial condition . 246g36.2.3D.1.4.2 Test procedure . 247g36.2.3D.1.4.3 Message contents. 247g36.2.3D.1.5 Test requirements 248g36.2.3D.2 Maximum Power Reduction (MPR) ProSe Direct Communication 249g36.2.3D.2.1 Test purpose 250g36.2.3D.2.2 Test applicability . 25

48、0g3ETSI 3GPP TS 36.521-1 version 14.2.0 Release 14 7 ETSI TS 136 521-1 V14.2.0 (2017-04)6.2.3D.2.3 Minimum conformance requirements 250g36.2.3D.2.4 Test description . 250g36.2.3D.2.4.1 Initial conditions 250g36.2.3D.2.4.2 Test procedure . 250g36.2.3D.2.4.3 Message contents. 250g36.2.3D.2.5 Test requ

49、irements 250g36.2.3E Maximum Power Reduction (MPR) for UE category 0 250g36.2.3E.1 Test purpose 250g36.2.3E.2 Test applicability . 250g36.2.3E.3 Minimum conformance requirements . 250g36.2.3E.4 Test description . 250g36.2.3E.4.1 Initial condition . 250g36.2.3E.4.2 Test procedure . 251g36.2.3E.4.3 Message contents. 251g36.2.3E.5 Test requirements 251g36.2.3EA Maximum Power Reduction (MPR) for UE category M1 252g36.2.3EA.1 Test purpose 252g36.2.3EA.2 Test applicability . 252g36.2.3EA.3 Minimum conformance requirements . 252g36.2.3EA.4 Test description . 253g36.2.3EA.4.1 Init