ETSI TS 126 093-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Mandatory speech codec speech processing functions .pdf

《ETSI TS 126 093-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Mandatory speech codec speech processing functions .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 126 093-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Mandatory speech codec speech processing functions .pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelMandatory speech cAdaptive MultSource c(3GPP TS 26.0TECHNICAL SPECIFICATION126 093 V13.0.0 (2016communications system (Phaelecommunications System (LTE; codec speech processing funulti-Rate (AMR) speech codeccontrolled rate operation .093 version

2、13.0.0 Release 1316-01) hase 2+); (UMTS); functions ec; 13) ETSI ETSI TS 126 093 V13.0.0 (2016-01)13GPP TS 26.093 version 13.0.0 Release 13Reference RTS/TSGS-0426093vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65

3、 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or i

4、n print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of

5、the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http

6、:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic o

7、r mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommuni

8、cations Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the

9、 GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 126 093 V13.0.0 (2016-01)23GPP TS 26.093 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertainin

10、g to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat

11、. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the

12、ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities,

13、UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shal

14、l“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used

15、in direct citation. ETSI ETSI TS 126 093 V13.0.0 (2016-01)33GPP TS 26.093 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7

16、g33.3 Abbreviations . 7g34 General . 7g34.1 General organisation. 7g35 AMR SCR operation 8g35.1 Transmit (TX) side . 8g35.1.1 General operation 8g35.1.2 Functions of the TX SCR handler . 9g35.1.2.1 AMR SCR Timing procedures . 9g35.1.3 The TX part of the AN 10g35.2 Receive (RX) side 11g35.2.1 General

17、 operation 11g35.2.3 Demands on the RX SCR handler 11g35.3 AMR SID Information format 12g3Annex A (normative): AMR DTX handler for the GSM system (corresponding to GSM 06.93) . 13g3A.1 Scope 13g3A.2 References 13g3A.3 Definitions, symbols and abbreviations . 14g3A.3.1 Definitions 14g3A.3.2 Symbols 1

18、4g3A.3.3 Abbreviations . 15g3A.4 General . 15g3A.4.1 General organisation. 15g3A.5 Transmit (TX) side . 16g3A.5.1 General operation . 16g3A.5.1.1 Functions of the TX DTX handler 17g3A.5.1.2 Functions of the TX Radio Subsystem . 18g3A.5.1.2.1 Functions of the TX Radio Subsystem for TCH/AFS . 18g3A.5.

19、1.2.2 Functions of the TX Radio Subsystem for TCH/AHS 18g3A.5.1.2.3 Functions of the Downlink TX Radio Subsystem for TFO . 19g3A.5.1.2.4 Functions of the TX Radio Subsystem for RATSCCH . 20g3A.6 Receive (RX) side 20g3A.6.1 General operation . 20g3A.6.1.1 Functions of the RX radio subsystem . 21g3A.6

20、.1.2 Functions of the RX DTX handler 21g3Annex B (normative): ETSI GSM-EFR SCR handler 22g3B.1 Transmit (TX) side . 22g3ETSI ETSI TS 126 093 V13.0.0 (2016-01)43GPP TS 26.093 version 13.0.0 Release 13B.1.1 General operation . 22g3B.1.2 Functions of the TX SCR handler 22g3B.1.2.1 GSM-EFR SCR Timing pr

21、ocedures . 22g3B.1.3 The TX part of the AN . 22g3B.1.3.1 Demands on the TX part of the Access Network 22g3B.2 Receive (RX) side 23g3B.3 SID Information format 23g3Annex C (normative): TIA IS-641 SCR Handler 24g3C.1 TX-side . 24g3C.2 RX-side. 24g3C.3 SID Information format 24g3Annex D (normative): TI

22、A TDMA-US1 SCR Handler 25g3D.1 TX-side . 25g3D.2 RX-side. 25g3D.3 SID Information format 25g3Annex E (normative): ARIB PDC-EFR SCR Handler . 26g3E.1 Transmit (TX) side . 26g3E.1.1 General operation . 26g3E.1.2 Functions of the TX SCR handler 26g3E.1.2.1 PDC_EFR SCR Timing procedures 26g3E.1.3 The TX

23、 part of the AN . 27g3E.1.3.1 Demands on the TX part of the Access Network 27g3E.2 Receive (RX) side 27g3E.3 SID information format 27g3Annex F (informative): Change history . 28g3History 29g3ETSI ETSI TS 126 093 V13.0.0 (2016-01)53GPP TS 26.093 version 13.0.0 Release 13Foreword This Technical Speci

24、fication has been produced by the 3GPP. The present document describes the operation of the Adaptive Multi Rate speech codec during Source Controlled Rate (SCR) operation within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change followi

25、ng formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approva

26、l; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI

27、 ETSI TS 126 093 V13.0.0 (2016-01)63GPP TS 26.093 version 13.0.0 Release 131 Scope This document describes the Source Controlled Rate (SCR)operation of the Adaptive Multi-Rate speech Codec in Codec Types UMTS_AMR and UMTS_AMR2 for the UMTS system. The implementation of this SCR operation is mandator

28、y in all UMTS equipment. The description is structured according to the block diagram in figure 1. This structure of distributing the various functions between system entities is not mandatory for implementation, as long as the operation on the speech decoder output remains the same. Annex A describ

29、es the Discontinuous Transmission (DTX) operation of the Adaptive Multi-Rate speech Codec in Codec Types FR_AMR, HR_AMR and OHR_AMR for GERAN. This annex is the former GSM 06.93 (Release 98). Annexes B to E describe the SCR operation of the Adaptive Multi-Rate speech Codec in Codec Types GSM_EFR, TD

30、MA_EFR, TDMA_US1 and PDC_EFR for the UMTS system. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or

31、non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same

32、 Release as the present document. 1 3GPP TS 26.071 : “AMR Speech Codec; General description“. 2 3GPP TS 26.073 : “AMR Speech Codec; ANSI-C code“. 3 3GPP TS 26.074 : “AMR Speech Codec; Test sequences“. 4 3GPP TS 26.090 : “AMR Speech Codec; Transcoding functions“. 5 3GPP TS 26.091 : “AMR Speech Codec;

33、 Error concealment of lost frames“. 6 3GPP TS 26.092 : “AMR Speech Codec; Comfort noise aspects“. 7 3GPP TS 26.094 : “AMR Speech Codec; Voice Activity Detector (VAD)“. 8 3GPP TS 26.101 : AMR Speech Codec; Frame structure“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purpose of t

34、his document, the following definitions apply. frame: Time interval of 20 ms, corresponding to the time segmentation of the Adaptive Multi Rate speech Codec, also used as a short term for a traffic frame. traffic frame: Block of 95244 information bits transmitted on the speech traffic channels. SID

35、frame: Frame that conveys information about the acoustic background noise. ETSI ETSI TS 126 093 V13.0.0 (2016-01)73GPP TS 26.093 version 13.0.0 Release 13speech frame: Traffic frame that has been classified as SPEECH_GOOD or SPEECH_BAD frame. VAD flag: Boolean flag, generated by the VAD algorithm in

36、dicating the presence (“1“) or the absence (“0“) of a speech frame. RX_TYPE: classifies the received frame. TX_TYPE: classifies the frame to be transmitted. hangover period: A period of frames added at the end of a speech burst in which VAD flag =“0“ and TX_TYPE is =“SPEECH_GOOD“, this period provid

37、es the encoder with an extra window to derive the Comfort Noise parameters . 3.2 Symbols For the purpose of this document, the following symbols apply. NelapsedNumber of elapsed frames since the last updated SID frame. 3.3 Abbreviations For the purpose of this document , the following abbreviations

38、apply. AN Access Network SCR Source Controlled Rate operation TS Telecommunication Standard, Technical Specification GSM Global System for Mobile Telecommunication GSM-EFR GSM Enhanced Full Rate speech Codec UE User Equipment PDC-EFR ARIB PDC-EFR 6.7 kBit/s speech Codec RAN Radio Access Network RX R

39、eceive SID Silence Descriptor TDMA-EFR TIA IS-641 Enhanced speech Codec TDMA-US1 TIA TDMA-US1 (12.2 kBit/s Codec, similar to GSM-EFR) TX Transmit VAD Voice Activity Detector 4 General Source Controlled Rate operation (SCR) is a mechanism for the AMR Speech Codec, which allows to encode the input sig

40、nal at a lower average rate by taking speech inactivity into account. The SCR scheme may be used for the following purposes: - to save power in the User Equipment; - to reduce the overall interference and load in the networks. SCR in the transmitting path (uplink) shall be in operation in UEs, if co

41、mmanded so by the network. Note that for UMTS AMR and UMTS AMR2 codec types, the uplink SCR operation shall always be activated. The UE shall handle SCR in the receiving path (downlink) at any time, regardless, whether SCR in the transmitting path is enabled or not. 4.1 General organisation The defa

42、ult SCR mechanism described in this document requires the following functions: - a Voice Activity Detector (VAD) on the transmit (TX) side; - evaluation of the background acoustic noise on the transmit (TX) side, in order to transmit characteristic parameters to the receive (RX) side; ETSI ETSI TS 1

43、26 093 V13.0.0 (2016-01)83GPP TS 26.093 version 13.0.0 Release 13- generation on the receive (RX) side of a similar noise, called comfort noise, during periods where the transmission is switched off. The Voice Activity Detector (VAD) is defined in 7 and the AMR-mode comfort noise functions in 6. Bot

44、h are based partly on the speech Codec and its internal variables, defined in 4. In addition to these functions, if the parameters arriving at the RX side are detected to be seriously corrupted by errors, the speech or comfort noise must be generated from substituted data in order to avoid seriously

45、 annoying effects for the listener. These functions are defined in 5. An overall description of the speech processing parts can be found in 1. An overview of one link SCR operation is shown in Figure 1. Figure 1: Block diagram of one link SCR operation 5 AMR SCR operation 5.1 Transmit (TX) side A bl

46、ock diagram of the transmit side SCR functions is shown in Figure 2. Figure 2: Block diagram of SCR functions at the TX side 5.1.1 General operation The TX SCR handler passes traffic frames, individually marked by TX_TYPE, to the Framing unit. Each frame consists of bit fields containing the informa

47、tion bits, the codec mode indication, and the TX_TYPE. TX_TYPE shall be used to specify the contents of the frame. The table below provides an overview of the different TX_TYPEs used and explains the required contents in the information bit and the mode indication bit fields. RX_TYPEMode IndicationI

48、nformation bitsTX SCR handlerSpeechEncoderVoiceActivityDetectorComfort NoiseParameterComputation“Network”Informationpacketing,transport andclassificationInformation bitsMode IndicationTX_TYPERX SCR handlerSpeechDecoderErrorConcealmentComfortNoiseGenerationTX SCR handlerSpeechEncoderVoiceActivityDete

49、ctorComfort NoiseParameterComputationTX Access NetworkTX ofinformationInformation bitsMode IndicationTX_TYPETS26.101Information bitsFrame TypeFQIFramingETSI ETSI TS 126 093 V13.0.0 (2016-01)93GPP TS 26.093 version 13.0.0 Release 13Table 1: SCR TX_TYPE identifiers for UMTS_AMR and UMTS_AMR2 TX_TYPE Information Bits Mode Indication SPEECH_GOOD Speech frame, size 95244 bits, depending on codec mode Current codec mode SPEECH_BAD Corrupt speech frame (bad CRC), size 95244 bits, depending on codec mode Current codec mode SID_FIRST Marker for the end