ETSI TS 125 113-2018 Universal Mobile Telecommunications System (UMTS) Base station (BS) and repeater electromagnetic compatibility (EMC) (V15 0 0 3GPP TS 25 113 version 15 0 0 Rel.pdf

《ETSI TS 125 113-2018 Universal Mobile Telecommunications System (UMTS) Base station (BS) and repeater electromagnetic compatibility (EMC) (V15 0 0 3GPP TS 25 113 version 15 0 0 Rel.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 113-2018 Universal Mobile Telecommunications System (UMTS) Base station (BS) and repeater electromagnetic compatibility (EMC) (V15 0 0 3GPP TS 25 113 version 15 0 0 Rel.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 113 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Base station (BS) and repeater electromagnetic compatibility (EMC) (3GPP TS 25.113 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 113 V15.0.0 (2018-07)13GPP TS 25.113 version 15.0.0 Release 15R

2、eference RTS/TSGR-0425113vf00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The

3、 present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization o

4、f ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware t

5、hat the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following servic

6、es: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shal

7、l not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTET

8、Mare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 113 V15.0.0 (2018-07)23GPP TS 25.113 ve

9、rsion 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

10、 in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Poli

11、cy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The pre

12、sent document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those t

13、rademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to tech

14、nical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryfo

15、rm.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “mus

16、t not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 113 V15.0.0 (2018-07)33GPP TS 25.113 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, sy

17、mbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 9g34 Test conditions . 10g34.1 General . 10g34.2 Arrangements for establishing a communication link 10g34.2.1 Multiple enclosure BS solution . 10g34.3 Narrow band responses on receivers 10g34.3.1 FDD and 3,84 Mcps TDD

18、 option . 10g34.3.2 1,28 Mcps TDD option . 11g34.4 Test condition for Repeater 11g34.4.1 Arrangements for test signals for repeaters . 11g34.5 Exclusion bands 11g34.5.1 Transmitter exclusion band . 11g34.5.2 Receiver exclusion band . 12g34.6 BS test configurations 13g35 Performance assessment . 13g3

19、5.1 General . 13g35.2 Assessment of BLER in Downlink . 14g35.3 Assessment of BLER in Uplink . 14g35.4 Ancillary equipment . 14g35.5 Repeaters 14g36 Performance Criteria 14g36.1 Performance criteria for continuous phenomena for BS 14g36.2 Performance criteria for transient phenomena for BS 14g36.3 (v

20、oid) 15g36.4 Performance criteria for continuous phenomena for Ancillary equipment . 15g36.5 Performance criteria for transient phenomena for Ancillary equipment 15g36.6 (void) 15g36.7 Performance criteria for continuous phenomena for repeaters . 15g36.8 Performance criteria for transient phenomena

21、for repeaters . 15g36.9 (void) 16g37 Applicability overview . 16g37.1 Emission . 16g37.2 Immunity 17g37.3 Applicability of requirements in TS 37.113 . 17g38 Emission . 19g38.1 Methods of measurement and limits for EMC emissions . 19g38.2 Test configurations . 19g38.3 Radiated emission from Base stat

22、ion, Repeater and ancillary equipment 19g38.3.1 Radiated emission, Base stations and Repeater 19g38.3.1.1 Definition 19g38.3.1.2 Test method . 19g38.3.1.2.1 FDD and 3,84 Mcps TDD option 19g38.3.1.2.2 1,28 Mcps TDD option 20g3ETSI ETSI TS 125 113 V15.0.0 (2018-07)43GPP TS 25.113 version 15.0.0 Releas

23、e 158.3.1.3 Limits 20g38.3.1.3.1 FDD and 3,84 Mcps TDD option 20g38.3.1.3.2 1,28 Mcps TDD option 21g38.3.1.4 Interpretation of the measurement results 21g38.3.2 Radiated emission, Ancillary equipment 22g38.3.2.1 Definition 22g38.3.2.2 Test method . 22g38.3.2.3 Limits 22g38.4 Conducted emission DC po

24、wer input/output port 22g38.4.1 Definition 23g38.4.2 Test method 23g38.4.3 Limits 23g38.5 Conducted emissions, AC mains power input/output port . 23g38.5.1 Definition 23g38.5.2 Test method 23g38.5.3 Limits 23g38.6 Harmonic Current emissions (AC mains input port) 24g38.7 Voltage fluctuations and flic

25、ker (AC mains input port) . 24g38.8 Telecommunication ports . 24g38.8.1 Definition 24g38.8.2 Test method 24g38.8.3 Limits 25g39 Immunity 25g39.1 Test methods and levels for immunity tests . 25g39.2 Test configurations . 25g39.3 RF electromagnetic field (80 MHz - 6000 MHz) . 26g39.3.1 Definition 26g3

26、9.3.2 Test method and level . 26g39.3.3 Performance criteria 27g39.4 Electrostatic discharge 27g39.4.1 Definition 27g39.4.2 Test method and level . 27g39.4.3 Performance criteria 27g39.5 Fast transients common mode 27g39.5.1 Definition 28g39.5.2 Test method and level . 28g39.5.3 Performance criteria

27、 28g39.6 RF common mode (0,15 MHz - 80 MHz) 28g39.6.1 Definition 28g39.6.2 Test method and level . 28g39.6.3 Performance criteria 29g39.7 Voltage dips and interruptions 29g39.7.1 Definition 29g39.7.2 Test method and level . 29g39.7.3 Performance criteria 29g39.8 Surges, common and differential mode

28、30g39.8.1 Definition 30g39.8.2 Test method and level . 30g39.8.2.1 Test method for telecommunication ports directly connected to outdoor cables 30g39.8.2.2 Test method for telecommunication ports connected to indoor cables . 30g39.8.2.3 Test method for AC power ports . 30g39.8.3 Performance criteria

29、 31g3Annex A (informative): Change History 32g3History 33g3ETSI ETSI TS 125 113 V15.0.0 (2018-07)53GPP TS 25.113 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may ch

30、ange following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG

31、 for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification. ETS

32、I ETSI TS 125 113 V15.0.0 (2018-07)63GPP TS 25.113 version 15.0.0 Release 151 Scope The present document covers the assessment of base stations, repeaters and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC). The present document specifies the applicable test conditio

33、ns, performance assessment and performance criteria for base stations, repeaters and associated ancillary equipment in one of the following categories: - base stations for the FDD mode of UTRA meeting the requirements of TS 25.104 1, with conformance demonstrated by compliance to TS 25.141 3. - base

34、 stations for both options of the TDD mode of UTRA meeting the requirements of TS 25.105 2, with conformance demonstrated by compliance to TS 25.142 4. The two options are the 3,84 Mcps and 1,28 Mcps options respectively. The requirements are listed in different subsections only if the parameters de

35、viate. - repeaters for the FDD mode of UTRA meeting the requirements of TS 25.106 10, with conformance demonstrated by compliance to TS 25.143 11. Technical requirements related to the antenna port of base stations or repeaters are not included in the present document. These are found in the relevan

36、t product standards 1, 2, 3, 4, 10, 11. The environment classification used in the present document refers to the residential, commercial and light industrial environment classification used in IEC 61000-6-1 5 and IEC 61000-6-3 6. The EMC requirements have been selected to ensure an adequate level o

37、f compatibility for apparatus at residential, commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any location but with low probability of occurrence. 2 References The following documents contain provisions which, through reference in this

38、 text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In th

39、e case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 25.104: “UTRA (BS) FDD; Radio transmission and reception“. 2 3GPP TS 25.105: “UTRA (BS) TDD; R

40、adio transmission and reception“. 3 3GPP TS 25.141: “UTRA (BS) FDD; Base station conformance testing (FDD)“. 4 3GPP TS 25.142: “UTRA (BS) TDD; Base station conformance testing (TDD)“. 5 IEC 61000-6-1: 2005; “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for re

41、sidential, commercial and light-industrial environments“. 6 IEC 61000-6-3: 2006/AMD1:2010: “Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light industrial environments“. 7 IEC 60050(161): “International Electrotechnical

42、 Vocabulary - Chapter 161: Electromagnetic compatibility“. 8 3GPP TS 25.101: “UTRA (UE) FDD; UE Radio transmission and reception (FDD)“. 9 3GPP TS 25.102: “UTRA (UE) TDD: UE Radio transmission and reception (TDD)“. ETSI ETSI TS 125 113 V15.0.0 (2018-07)73GPP TS 25.113 version 15.0.0 Release 1510 3GP

43、P TS 25.106: “UTRA Repeater; Radio Transmission and Reception“. 11 3GPP TS 25.143: “UTRA Repeater conformance testing“. 12 ITU-R Rec. SM.329: “Unwanted emissions in the spurious domain“. 13 Void 14 CISPR 16-1-1: “Specification for radio disturbance and immunity measuring apparatus and methods - Meas

44、uring apparatus“. 15 IEC 61000-3-2 (2004): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current g148 16 A)“. 16 IEC 61000-3-3 (2002): “Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage

45、fluctuations and flicker in low-voltage supply systems for equipment with rated current g148 16 A“. 17 IEC 61000-4-2: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test“. 18 IEC 61000-4-3: “Electromagnetic compatibilit

46、y (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency electromagnetic field immunity test“. 19 IEC 61000-4-4: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test“. 20 IEC 61

47、000-4-5: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test“. 21 IEC 61000-4-6: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to contacted disturbances, induced by radio frequenc

48、y fields“. 22 IEC 61000-4-11: “Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations. Immunity tests“. 23 ITU-R Recommendation SM.1539 (2001): “Variation of the boundary between the out-of-band and spur

49、ious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. 24 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 25 IEC 61000-3-12 (2005): “Electromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for harmonic current produced by equipment connected to public low-voltage system with input current 16 A and g148 75 A. 26 IEC 61000-3-11 (2000): “Electromagnetic compatibility (EMC) - Part 3-11: Limits Limitation of voltage fluctuations and flicker in