ETSI TS 102 515-2008 Methods for Testing and Specification (MTS) Internet Protocol Testing (IPT) IPv6 Core Protocol Conformance Test Suite Structure and Test Purposes (TSS&TP)《测试方法_1.pdf

《ETSI TS 102 515-2008 Methods for Testing and Specification (MTS) Internet Protocol Testing (IPT) IPv6 Core Protocol Conformance Test Suite Structure and Test Purposes (TSS&TP)《测试方法_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 515-2008 Methods for Testing and Specification (MTS) Internet Protocol Testing (IPT) IPv6 Core Protocol Conformance Test Suite Structure and Test Purposes (TSS&TP)《测试方法_1.pdf（105页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 515 V1.1.2 (2008-01)Technical Specification Methods for Testing and Specification (MTS);Internet Protocol Testing (IPT): IPv6 Core Protocol;Conformance Test Suite Structure andTest Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, wh

2、ich is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs n

3、ot referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Methods for Testing and Specification (MTS). ETSI ETSI TS 102 515

4、V1.1.2 (2008-01) 5 1 Scope The purpose of the present document is to provide Test Suite Structure and Test Purposes (TSS - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For onl

5、ine referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life

6、of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guar

7、antee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any a

8、mendments) applies. 1 ETSI TS 102 351: “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Framework“. 2 ETSI TS 102 514: “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT): IPv6 Core Protocol; Requirements Catalogue

9、“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Su

10、ite specification“. 5 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 6 IETF RFC 1981: “Path MTU Discovery for IP version 6“. 7 IETF RFC 2460: “Internet Protocol, Version 6 (IPv6) Specification“. 8

11、 IETF RFC 2461: “Neighbor Discovery for IP Version 6 (IPv6)“. ETSI ETSI TS 102 515 V1.1.2 (2008-01) 6 9 IETF RFC 2463: “Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification“. 10 IETF RFC 2675: “IPv6 Jumbograms“. 11 IETF RFC 3513: “Internet Protocol Vers

12、ion 6 (IPv6) Addressing Architecture“. 2.2 Informative references 12 IETF RFC 2374: “An IPv6 Aggregatable Global Unicast Address Format“. 13 IETF RFC 2462: “IPv6 Stateless Address Autoconfiguration“. 14 IETF RFC 2711: “IPv6 Router Alert Option“. 15 IETF RFC 2894: “Router Renumbering for IPv6“. 16 IE

13、TF RFC 3484: “Default Address Selection for Internet Protocol version 6 (IPv6)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: abstract test case: Refer to ISO/IEC 9646-1 3. Abstract Test Method (ATM): Refer to IS

14、O/IEC 9646-1 3. Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 3. Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 3. Lower Tester (LT): Refer to ISO/IEC 9646-1 3. Test Purpose (TP): Refer to ISO/IEC 9646-1 3. 3.2 Abbreviations For the purposes of the present document, the following abbr

15、eviations apply: ATS Abstract Test Suite IETF Internet Engineering Task Force IPv6 Internet Protocol version 6 IUT Implementation Under Test RC Requirements Catalogue RQ Requirement TP Test Purpose TSS Test Suite Structure UDP User Datagram Protocol ETSI ETSI TS 102 515 V1.1.2 (2008-01) 7 4 Test Sui

16、te Structure (TSS) Test Purposes have been written for IPv6 nodes, hosts and routers according to the requirements (RQ) of the requirements catalogue (RC) in TS 102 514 2. Test purposes have been written for behaviours requested with “MUST“ or “SHOULD“, optional behaviour described with “MAY“ or sim

17、ilar wording indicating an option has not been turned into test purposes. The test purposes have been divided into three groups: Group 1: Node tests (all sub-groups) Group 2: Host tests (only sub-groups that carry test purposes) Group 3: Router tests (only sub-groups that carry test purposes) The su

18、b-grouping of these three groups follows the structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full view on the relation between RQ and TSS&TP. Group 1 “Node tests (NT)“

19、 Group 1.1 “Generate IPv6 packets (GIP)“ Group 1.1.1 “Generate Extension Header (GEH)“ Group 1.1.1.1 “Generate Destination Options Header (GDOH)“ Group 1.1.1.2 “Generate Routing Header (GRH)“ Group 1.1.1.3 “Generate Hop by Hop Header(GHHH)“ Group 1.1.2 “Generate IPv6 Header(GIH)“ Group 1.1.3 “Discov

20、er PMTU(DPMTU)“ Group 1.1.3.1 “Multicast PMTU Discovery (MPMTUD)“ Group 1.2 “Process IPv6 packets (PIP)“ Group 1.2.1 “Process Extension Headers (PEH)“ Group 1.2.1.1 “Process Fragment Packets (PFP)“ Group 1.2.1.2 “Process Routing Header (PRH)“ Group 1.2.1.3 “Process Hop-By-Hop Header (PHBHH)“ Group 1

21、.2.1.4 “Process Extension Header Options (PEHO)“ Group 1.2.2 “Process IPv6 Header (PIP6)“ Group 1.2.2.1 “Process Hop Limit (PHL)“ Group 1.2.2.2 “Process Traffic Class (PTC)“ Group 1.2.2.3 “Process Flow Label (PHL)“ Group 1.2.2.4 “Process Checksum (PSC)“ Group 1.3 “Initialize (INI)“ Group 1.3.1 “Dete

22、rmine Default MTU (DDMTU)“ Group 1.3.2 “Configure Address (CA)“ Group 1.3.2.1 “Manual Address Configuration (MAC)“ ETSI ETSI TS 102 515 V1.1.2 (2008-01) 8 Group 1.3.2.2 “Stateless Autoconfiguration (SLAC)“ Group 1.3.2.2.1 “Form Link-local Address (LLA)“ Group 1.3.2.2.2 “Process Invalid SA Syntax (PI

23、SAS)“ Group 1.3.2.3 “Stateful Autoconfiguration (SFAC)“ Group 1.3.2.4 “Simultaneous Stateless and Stateful Autoconfiguration (SSSAC)“ Group 1.3.2.5 “Detect Duplicate Address (DAD)“ Group 1.3.2.5.1 “Duplicate Address Detection Timers and Counters (DADTMR)“ Group 1.3.2.6 “Assign Global Address (GA)“ G

24、roup 1.3.2.6.1 “Use of M-Bit (UMB)“ Group 1.3.2.6.2 “Use of O-Bit (UOB)“ Group 1.3.2.6.3 “Process the Prefix Information Option (PPIO)“ Group 1.4 “Address use (AU)“ Group 1.5 “ICMPv6 Functions (ICF)“ Group 1.5.1 “Protect ICMP Messages from Attacks (PIMA)“ Group 1.5.2 “Process ICMPv6 Messages (PIM)“

25、Group 1.5.2.1 “Process ICMPv6 Information Messages (PIIM)“ Group 1.5.2.1.1 “Process Echo Reply Message (PERPM)“ Group 1.5.2.1.2 “Process Echo Request Message (PERQM)“ Group 1.5.2.2 “Process ICMPv6 Error Messages (PEM)“ Group 1.5.2.2.1 “Process Parameter Problem Message (PPPM)“ Group 1.5.2.2.2 “Proce

26、ss Time Exceeded Message (PTEM)“ Group 1.5.2.2.3 “Process Packet Too Big Message (PPTBM)“ Group 1.5.2.2.4 “Process Destination Unreachable Message (PDUM)“ Group 1.5.3 “Generate ICMPv6 Messages (GIM)“ Group 1.5.3.1 “Generate ICMPv6 Information Messages (GIIM)“ Group 1.5.3.1.1 “Generate Echo Request M

27、essage (GERQM)“ Group 1.5.3.2 “Generate ICMPv6 Error Messages (GIEM)“ Group 1.5.3.2.1 “Generate Parameter Problem Message (GPPM)“ Group 1.5.3.2.2 “Generate Time Exceeded Message (GTEM)“ Group 1.5.3.2.3 “Generate Message Too Big Message (GMTBM)“ Group 1.5.3.2.4 “Generate Destination Unreachable Messa

28、ge (GTEM)“ Group 1.5.3.2.4.1 “Destination Unreachable Code Field Value (DUCFV)“ Group 1.5.3.2.5 “Limit ICMP Bandwidth and Forwarding Costs (LIBFC)“ Group 1.5.3.3 “Determine ICMPv6 Message Source Address (DIMSA)“ Group 1.6 “Neighbour Discovery (ND)“ ETSI ETSI TS 102 515 V1.1.2 (2008-01) 9 Group 1.6.1

29、 “ND Protocol Constants and Default Values (NDPCDV)“ Group 1.6.2 “Address Resolution (AR)“ Group 1.6.2.1 “Address Resolution Behavior (ARB)“ Group 1.6.2.2 “Address Resolution Data Queue Handling (ARDQH)“ Group 1.6.3 “Neighbor Unreachability Detection (NUD)“ Group 1.6.3.1 “Neighbour Reachability Proc

30、ess (NRP)“ Group 1.6.3.1.1 “Start Neighbor Reachability Determination (SNRD)“ Group 1.6.3.1.2 “Determine Neighbor Reachability (DNR)“ Group 1.6.3.1.3 “Invalid Reachability Indications (IRI)“ Group 1.6.3.2 “Neighbor Reachability Probing (NRP)“ Group 1.6.4 “Next Hop Determination (NHD)“ Group 1.6.5 “U

31、sing Options in Neighbor Discovery Messages (UONDM)“ Group 1.6.6 “Process Neighbor Discovery Messages (PND)“ Group 1.6.6.1 “Process Neighbor Solicitation (PND)“ Group 1.6.6.1.1 “Discover Neighbor by NS (DNNS)“ Group 1.6.6.1.2 “Process Proxy NS (PPNS)“ Group 1.6.6.1.3 “Process Anycast NS (PANS)“ Grou

32、p 1.6.6.1.4 “Process NS for Address Resolution (PNSAR)“ Group 1.6.6.1.5 “Process Field Anomalies in NS (NSFA)“ Group 1.6.6.1.6 “Process Option Anomalies in NS (NSOA)“ Group 1.6.6.2 “Process Neighbor Advertisement (PNA)“ Group 1.6.6.2.1 “Process Solicited Neighbor Advertisement (PSNA)“ Group 1.6.6.2.

33、2 “Process Unsolicited Neighbor Advertisement (PUNA)“ Group 1.6.6.2.3 “Discover Neighbor by NA (DNNA)“ Group 1.6.6.2.4 “Process Field Anomalies in NA (PFANA)“ Group 1.6.6.2.5 “Process Option Anomalies in NA (POANA)“ Group 1.6.6.3 “Process Router Solicitation (PRA)“ Group 1.6.6.3.1 “Discover Neighbor

34、 by RS (DNRS)“ Group 1.6.6.3.2 “Router Processing of RS (RPRS)“ Group 1.6.6.3.3 “Host Processing of RS (HPRS)“ Group 1.6.6.3.4 “Process Field Anomalies in RS (PFARS)“ Group 1.6.6.3.5 “Process Option Anomalies in RS (POARS)“ Group 1.6.6.4 “Process Router Advertisement (PRA)“ Group 1.6.6.4.1 “Discover

35、 Neighbor by RA (DNRA)“ Group 1.6.6.4.2 “Router Processing of RA (RPRA)“ ETSI ETSI TS 102 515 V1.1.2 (2008-01) 10Group 1.6.6.4.3 “Host Processing of RA (HPRA)“ Group 1.6.6.4.4 “Process Field Anomalies in RA (PFARA)“ Group 1.6.6.4.5 “Process Option Anomalies in RA (PAORA)“ Group 1.6.6.5 “Process Redi

36、rect Message (PRM)“ Group 1.6.6.5.1 “Discover Neighbor by Redirect Message (DNRM)“ Group 1.6.6.5.2 “Router Processing of Redirect Message (RPRM)“ Group 1.6.6.5.3 “Host Processing of Redirect Message (HPRM)“ Group 1.6.6.5.4 “Process Field Anomalies in Redirect Message (PFARM)“ Group 1.6.6.5.5 “Proces

37、s Option Anomalies in Redirect Message (POARM)“ Group 1.6.7 “Generate Neighbor Discovery Messages (GNDM)“ Group 1.6.7.1 “Generate Neighbor Solicitation (GNS)“ Group 1.6.7.1.1 “Generate Neighbor Solicitation Header (GNSH)“ Group 1.6.7.1.2 “Generate Neighbor Solicitation Option (GNSO)“ Group 1.6.7.1.3

38、 “Generate NS for Address Resolution (GNSAR)“ Group 1.6.7.2 “Generate Neighbor Advertisement (GNA)“ Group 1.6.7.2.1 “Generate Unsolicited Neighbor Advertisement (GUNA)“ Group 1.6.7.2.1.1 “Form Unsolicited NA Header (FUNAH)“ Group 1.6.7.2.1.2 “Generate Unsolicited Proxy NA (GUPNA)“ Group 1.6.7.2.1.3

39、“Generate Unsolicited Anycast NA (GUANA)“ Group 1.6.7.2.2 “Form Neighbor Advertisement Header (FNAH)“ Group 1.6.7.3 “Generate Router Solicitation (GRA)“ Group 1.6.7.4 “Generate Router Advertisement (GRA)“ Group 1.6.7.5 “Generate Redirect Message (GRM)“ Group 1.7 “Address Architecture (AA)“ Group 1.8

40、 “Jumbograms (JG)“ Group 1.8.1 “TCP Jumbograms (TCPJG)“ Group 1.8.2 “UDP Jumbograms (UDPJG)“ Group 1.8.3 “Process Jumbograms (PJG)“ Group 1.8.4 “Generate Jumbograms (GJG) Group 2 “Host (HS)“ Group 2.3 “Initialize (INI)“ Group 2.3.2.2.1 “Form Link-local Address (LLA)“ Group 2.3.2.6 “Assign Global Add

41、ress (GA)“ Group 2.3.2.6.1 “Use of M-bit (UMB)“ Group 2.3.2.6.2 “Use of O-Flag (UOB)“ ETSI ETSI TS 102 515 V1.1.2 (2008-01) 11Group 2.3.2.6.3 “Process the Prefix Information Option (PFX)“ Group 2.6 “Neighbour Discovery (ND)“ Group 2.6.1 “ND Protocol Constants and Default Values (NDPCDV)“ Group 2.6.6

42、.1.4 “Process NS for Address Resolution (PNSAR)“ Group 2.6.6.3.3 “Host Processing of RS (HPRS)“ Group 2.6.6.4.3 “Host Processing of RA (HPRA)“ Group 2.6.6.4.5 “Process Option Anomalies in RA (POARA)“ Group 2.6.6.5.3 “Host Processing of Redirect Message (HPRM)“ Group 2.6.6.5.4 “Process Field Anomalie

43、s in Redirect Message (PFARM)“ Group 2.6.6.5.5 “Process Option Anomalies in Redirect Message (POARM)“ Group 2.6.7.3 “Generate Router Solicitation (GRS)“ Group 2.6.7.3.1 “Generate Router Solicitation Header (GRSH)“ Group 2.6.7.3.2 “Generate RS Source Link-layer Address Option (GRSSLAO)“ Group 2.6.7.3

44、.3 “Router Solicitation Behavior (RSB)“ Group 3 “Router (RT)“ Group 3.2 “Process IPv6 packets (PIP)“ Group 3.2.1.2 “Process Routing Header (PRH)“ Group 3.3 “Initialize (INI)“ Group 3.3.2 “Configure Address CA)“ Group 3.3.2.2 “Stateless Autoconfiguration (SAC)“ Group 3.3.2.2.1 “Form Link-local Addres

45、s (LLA)“ Group 3.5 “ICMPv6 Functions (ICF)“ Group 3.5.2 “Process ICMPv6 Messages (PIM)“ Group 3.5.3.2.2 “Generate Time Exceeded Message (GTEM)“ Group 3.5.3.2.3 “Generate Message Too Big Message (GMTBM)“ Group 3.5.3.2.4 “Generate Destination Unreachable Message (GTEM)“ Group 3.5.3.2.4.1 “Destination

46、Unreachable Code Field Value (DUCFV)“ Group 3.6 “Neighbour Discovery (ND)“ Group 3.6.1 “ND Protocol Constants and Default Values (NDPCDV)“ Group 3.6.2.1 “Address Resolution Behavior (ARB)“ Group 3.6.3.1.1 “Start Neighbor Reachability Determination (SNRD)“ Group 3.6.6.1.4 “Process NS for Address Reso

47、lution (PNSAR)“ Group 3.6.6.3 “Process Router Solicitation (PRS)“ Group 3.6.6.3.1 “Discover Neighbor by RS (DNRS)“ Group 3.6.6.3.2 “Router Processing of RS (RPRS)“ ETSI ETSI TS 102 515 V1.1.2 (2008-01) 12Group 3.6.6.3.4 “Process Field Anomalies in RS (PFARS)“ Group 3.6.6.3.5 “Process Option Anomalie

48、s in RS (POARS)“ Group 3.6.6.5.2 “Router Processing of Redirect Message (RPRM)“ Group 3.6.7.2 “Generate Neighbor Advertisement (GNA)“ Group 3.6.7.2.1.2 “Generate Unsolicited Proxy NA (GUPNA)“ Group 3.6.7.4 “Generate Router Advertisement (GRA)“ Group 3.6.7.4.1 “Form Router Advertisement Header (FRAH)

49、“ Group 3.6.7.4.2 “Form Router Advertisement Options (FRAO)“ Group 3.6.7.4.2.1 “RA MTU Option (RAMTUO)“ Group 3.6.7.4.2.2 “RA Source Link-layer Address Option (RASLAO)“ Group 3.6.7.4.2.3 “RA Prefix Information Option (RAPIO)“ Group 3.6.7.4.3 “Router Advertisement Behavior (RAB)“ Group 3.6.7.4.3.1 “Startup Router Advertisement Behavior (SRAB)“ Group 3.6.7.4.3.1.1 “AdvCurHopLimit (ACHL)“ Group 3.6.7.4.3.1.2 “AdvDefaultLifetime (ADL)“ Group 3.6.7.4.3.1.3