ETSI EN 305 200-1-2018 Access Terminals Transmission and Multiplexing (ATTM) Energy management Operational infrastructures Global KPIs Part 1 General requirements (V1 1 1).pdf

《ETSI EN 305 200-1-2018 Access Terminals Transmission and Multiplexing (ATTM) Energy management Operational infrastructures Global KPIs Part 1 General requirements (V1 1 1).pdf》由会员分享，可在线阅读，更多相关《ETSI EN 305 200-1-2018 Access Terminals Transmission and Multiplexing (ATTM) Energy management Operational infrastructures Global KPIs Part 1 General requirements (V1 1 1).pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 305 200-1 V1.1.1 (2018-07) Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 1: General requirements EUROPEAN STANDARD ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 2Reference DEN/ATTM-003 Keywords broadband, energy manageme

2、nt, ICT, sustainability ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document ca

3、n be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of a

4、ny existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may

5、 be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.et

6、si.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified wi

7、thout the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of E

8、TSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 3Contents Intellectual Property Righ

9、ts 5g3Foreword . 5g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviations . 10g34 Context for Key Performance Indicators (KPI)

10、 10g34.1 Energy management and sustainability concepts . 10g34.2 Differentiation of Key Performance Indicators 10g34.2.1 General 10g34.2.2 Technical KPIs 11g34.2.3 Objective KPIs 12g34.2.3.1 General 12g34.2.3.2 Energy consumption within ETSI EN 305 200 series . 12g34.2.3.3 Task effectiveness within

11、ETSI EN 305 200 series 12g34.2.3.4 Energy re-use within ETSI EN 305 200 series 13g34.2.3.5 Renewable energy within ETSI EN 305 200 series 13g34.2.4 Global KPIs 13g34.2.4.1 General 13g34.2.4.2 Global KPIs within ETSI EN 305 200 series 13g35 Requirements for Global and Objective KPIs 14g35.1 General .

12、 14g35.2 Scale . 14g35.3 Utilization and evolution 15g35.4 Definition of boundaries . 15g35.5 Formulae. 15g35.5.1 General 15g35.5.2 Definition of terms 15g35.5.3 Clarity . 15g35.5.4 Criteria 15g35.6 Measurement points and procedures 15g35.6.1 Overview 15g35.6.2 Detailed treatment . 16g35.7 Classific

13、ations 17g35.8 Reporting 17g36 The use of KPIs 17g3History 19g3ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 4List of figures Figure 1: The relationship of energy related Technical, Objective and Global KPIs 11g3Figure 2: Schematic of the foundations of any Global KPI for energy management 14g3Figure 3: S

14、chematic of combinations of Objective KPIs within a Global KPI for energy management .14g3Figure 4: Schematic showing application of TKPI, TREPEATand t 16g3Figure 5: Mathematical treatment of assessment timing .17g3ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 5Intellectual Property Rights Essential paten

15、ts IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essentia

16、l, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out

17、by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are as

18、serted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsemen

19、t by ETSI of products, services or organizations associated with those trademarks. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission and Multiplexing (ATTM). The present document is part 1 of a multi-part deliverable covering Global Ke

20、y Performance Indicators for energy management of operational broadband deployment infrastructures, as identified below: Part 1: “General requirements“; Part 2: “Specific requirements“; Part 3: “ICT Sites“; Part 4: “Design assessments“. National transposition dates Date of adoption of this EN: 4 Jul

21、y 2018 Date of latest announcement of this EN (doa): 31 October 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 April 2019 Date of withdrawal of any conflicting National Standard (dow): 30 April 2019 ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 6Modal verbs

22、terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allow

23、ed in ETSI deliverables except when used in direct citation. Introduction Energy costs continue to rise, a trend that will continue in the future, while broadband penetration is introducing new active equipment to the network architecture. In this context, and to reflect other environmental aspects

24、of sustainability, it is vital that the main telecommunication operators implement effective general engineering of fixed and mobile broadband networks and sites provisioning, managing or using those networks (i.e. ICT sites) in order to respond to critical issues of energy consumption while proposi

25、ng essential solutions to broadband deployment. To guide this process, it is essential that metrics are defined, termed Global Key Performance Indicators (KPIs), that enable energy usage to be managed more effectively. The Global Key Performance Indicators specified in the standards in the ETSI EN 3

26、05 200 series i.2 address operational infrastructures and do not consider design or operation of individual components comprising those infrastructures. The ETSI EN 305 200 i.2 multi-part deliverable comprises: The present document: a generic requirements document addressing Global KPIs for operatio

27、nal infrastructures. A sub-series ETSI EN 305 200-2 that defines the Global KPIs, and drives energy management targets, for specific operational networks and sites and which describes how the Global KPIs are to be applied (which may be used to support future regulatory objectives): - ETSI EN 305 200

28、-2-1 i.3: “ICT sites“; - ETSI EN 305 200-2-2 i.4: “Fixed broadband access networks“; NOTE: Excluding cable access networks. - ETSI EN 305 200-2-3 i.5: “Mobile broadband access networks“. The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain inf

29、ormation on values that have been used by certain organizations. A sub-series ETSI EN 305 200-3 including ETSI EN 305 200-3-1 i.6 that defines particular implementations of Global KPIs within ICT sites based on the requirements of ETSI EN 305 200-2-1 i.3, and which may define levels of performance t

30、o simplify and provide clearer understanding of Global KPIs allowing the evaluation of performance of energy use management in ICT sites. The standards do not define weightings of Objective KPIs or targets or limits for Global KPIs but may contain information on values that have been used by certain

31、 organizations. A sub-series ETSI EN 305 200-4 including ETSI EN 305 200-4-4 i.7 that defines design assessments of Global KPIs, and drives energy management targets, for specific operational networks and sites and which describes how the Global KPIs are to be applied (which may be used to support f

32、uture regulatory objectives). These standards may be considered to be a contribution to the application of ISO 50001 i.8 in relation to the development of policy for the continuous improvement of energy management and will accelerate: the availability of operational infrastructure architectures and

33、network implementations that use energy more efficiently; the definition and attainment objectives for other environmental aspects of sustainability for operational broadband networks. ETSI ETSI EN 305 200-1 V1.1.1 (2018-07) 71 Scope The present document describes the energy management landscape of

34、the operational infrastructures of broadband deployment addressed by this multi-part deliverable, their inter-relationship and boundaries. It specifies the following aspects for Global Key Performance Indicators in relation to energy management for the operational infrastructures of broadband deploy

35、ment: common objectives in relation to energy consumption: - energy consumption; - task effectiveness; - energy re-use; - renewable energy; general requirements for all KPIs specified in the other standards in the ETSI EN 305 200 series i.2 in relation to: - infrastructure scalability; - infrastruct

36、ure evolution; - formulae and definition of terms; - measurement points and procedures; the use of KPIs. The environmental impact and management of different energy sources are outside the scope of the present document. Within the present document: clause 4 explains the context underlying the need f

37、or the development of Global KPIs for energy efficiency and introduces the Objective KPIs upon which the Global KPIs are founded; clause 5 specifies the general requirements that are applied to all KPIs defined within the standards in the ETSI EN 305 200-2 series and ETSI EN 305 200-3 series; clause

38、 6 summarizes the applicability of the Global and Objective KPIs defined within the standards in the ETSI EN 305 200-2 series and ETSI EN 305 200-3 series. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number)

39、 or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https

40、:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. Not applicable. ETSI ETSI EN 305 200-1

41、 V1.1.1 (2018-07) 82.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced documen

42、t (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user wi

43、th regard to a particular subject area. i.1 Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings. i.2 ETSI EN 305 200 series: “Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures;

44、Global KPIs“. i.3 ETSI EN 305 200-2-1: “Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 1: ICT Sites“. i.4 ETSI EN 305 200-2-2: “Access, Terminals, Transmission and Multiplexing (ATTM); Ener

45、gy management; Operational infrastructures; Global KPIs; Part 2: Specific requirements; Sub-part 2: Fixed broadband access networks“. i.5 ETSI EN 305 200-2-3: “Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 2: Specific requi

46、rements; Sub-part 3: Mobile broadband access networks“. i.6 ETSI EN 305 200-3-1: “Access, Terminals, Transmission and Multiplexing (ATTM); Energy management; Operational infrastructures; Global KPIs; Part 3: ICT sites; Sub-part 1: DCEM“. i.7 ETSI EN 305 200-4-4: “Integrated broadband cable telecommu

47、nication networks (CABLE); Energy management; Operational infrastructures; Global KPIs; Part 4: Design assessments; Sub-part 4: Cable access networks“. i.8 ISO 50001: “Energy management systems - Requirements with guidance for use“. i.9 ISO Guide 82: “Guide for addressing sustainability in standards

48、“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: access network: functional elements (that is equipment and infrastructure) that enable communication between an operator site (OS) and a customer network c

49、able access network: access network provided by cable operators comprising optical fibre and metallic cabling providing direct connection to customer premises energy consumption: total consumption of energy by an operational infrastructure energy management: combination of reduced energy consumption and increased task effectiveness, re-use of energy and use of renewable energy energy re-use: transfer or conversion of energy (typically in the form of heat) produced by the operational infrastructure to do other work