ETSI EN 300 052-6-1999 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol.pdf

《ETSI EN 300 052-6-1999 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 052-6-1999 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、- c PLEASE NOTE This document is normally accompanied by a disk/dish wnen purchased in hardcopy. The dislddisks contain information which would be of no value as a hardcopy document. If you require a copy of the diskldisb, please use the contact information below for your request. When submitting yo

2、ur request, please have the following irzfonnation vuiizble: Your company name/account number Originating orsanisacion Document number USMCanada Enformation Handling Services E-mail Te!: 800-U$-3352 Outside USAiCanada Except the United I(ingdom) Information Handling Services E-mai Te!: i 1-303-790

3、-0600 Technic3 Tz!: (O Fax: (O United Kingdom Indexes Ltd 344) 404409, Custoinet Support 34.1) 40442 I, Ccistoiner Suppori In formation Handing Senices and Teclinicai Indexer - Cortitiziad to Service Excellence STDOETSI EN 300 052-b-ENGL 1999 3400855 0463793 2Lb ETSI EN 300 052-6 V1.3.3(1999-11 , I

4、European Standard (Telecommunications series) Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Digital Subscriber Signalling System No. one (DSSI) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for

5、Testing (PIXIT) proforma specification for the network _ _ _ STD.ETS1 EN 300 052-b-ENGL 1999 9 3400855 OYbL392 152 2 ETSI EN 300 052-6 V1.3.3 (1999-11) Reference REN/SPS-05 182-6 (OhdiOj20.PDF) Keywords ISDN, DSS1, supplementary service, MSN, ATS, PIXIT, network ETSI Postal address F-O6921 Sophia An

6、tipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret N 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistde ia Sous-Prfecture de Grasse (OS) No 780388 Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Internet secretariatetsi.fr Indi

7、vidual copies of this ETSI deliverable can be downloaded from http:/www.etsi.org If you find errors in the present document, send your comment to: editoretsi.fr hoortant notice This ETSI deliverable may be made available in more than one electronic version or in print. In any case of existing or per

8、ceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference should be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Copyright Notification No part may

9、be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 1999. All rights reserved. ETSI STDeETSI EN 300 052-b-ENGL 1999 3400855 04bL793 O99 m 3 ETSI EN 300 052-6 VI .

10、3.3 (1999-1 1) Contents intellectual Property Rights 5 Foreword 5 1 2 3 3.1 3.2 4 4.1 4.1.1 4.1.2 4.2 5 6 6.1 6.1.1 Scope 6 References 6 Definitions and abbreviations 7 Definitions 7 Abbreviations . 7 Abstract Test Method (ATM) 8 Description of ATM used . 8 Conventions for test components and PCOs .

11、 8 Conventions for variables and parameters 9 Alternative ATM 10 Untestable test purposes . 10 ATS conventions 11 Declarations part 11 Type definitions 11 6.1.1.1 6.1.1.2 6.1.1.2.1 6.1.1.2.2 6.1.1.3 6.1.1.3.1 6.1.1.3.2 6.1.1.4 6.1.1.4.1 6.1.1.4.2 6.1.2 6.1.3 6.1.4 6.1.4.1 6.1.4.2 6.1.5 6.2 6.2.1 6.2

12、.2 6.2.3 6.2.3.1 6.2.3.2 6.2.4 6.2.4.1 6.2.4.2 6.2.5 6.2.5.1 6.2.5.2 6.2.6 6.2.7 6.2.8 6.2.8.1 6.2.8.2 6.3 6.3.1 6.3.2 Simple type definitions 11 Structured type definitions 11 TTCN structured type definitions 11 ASN.l structured type definitions 11 ASP type definitions 11 TTCN ASP type definitions

13、. 11 ASN.1 ASP type definitions 12 PDU type definitions . 12 TTCN PDU type definitions 12 ASN.1 PDU type definitions . 12 Test suite constants . 12 Test suite parameters 12 Variables . 12 Test suite variables 12 Test case variables 13 Test suite operation definitions . 13 Constraints part . 13 Struc

14、tured type constraint declaration . 13 ASN . 1 type constraint declaration 13 ASP type constraint declaration 13 ASN.l ASP type constraint declaration 13 TTCN ASP type constraint declaration . 14 ASN . 1 PDU type constraint declaration 14 TTCN PDU type constraint declaration 14 Chaining of constrain

15、ts . 14 Static chaining . 14 Dynamic chaining 14 Derived constraints . 14 Parameterized constraints . 15 Value assignment 15 Specific values 15 Matching values 15 Dynamic part 15 Test cases 15 Test steps 15 PDU type constraint declaration . 14 ETSI STDmETSI EN 300 052-b-ENGL 1999 m 3400855 04bL794 T

16、2S m 4 ETSI EN 300 052-6 V1.3.3 (1999-11) 6.3.2.1 PTC -IN . 15 6.3.2.2 PTC 1-OUT . 15 6.3.3 Defaults . 16 7 ATS to TP map . 16 8 PCTR conformance 16 9 PIXIT conformance 16 10 ATS conformance 16 A . 1 A.l.l A.1.2 A . 1.3 A . 1.4 A.1.5 A.2 A.3 A.4 AS A . 6 A.7 Annex A (normative): Protocol Conformance

17、 Test Report (PCTR) proforma . 17 Identification summary 17 Protocol conformance test report 17 IUT identification . 17 Testing environment . 17 Limits and reservations . 18 Comments . 18 IUT conformance status . 18 Static conformance summary . 18 Dynamic conformance summary 18 Static conformance re

18、view report 19 Test campaign report 19 Observations . 19 Annex B (normative): Partial PEUT proforma 20 B . 1 Identification summary 20 B.2 Abstract test suite summary . 20 B.3 Test laboratory . 20 B.4 Client (of the test laboratory) . 21 B.5 System Under Test (SUT) 21 B.6 Protocol information 22 B.6

19、.1 Protocol identification 22 B.6.2 Parameter values . 22 B.6.3 Number information parameter values . 23 B.6.4 Configuration of IUT 23 B.6.5 Timer values . 23 B.7 Basic call PIXIT items . 24 B.7.1 Annex C (normative): Abstract Test Suite (ATS) . 25 C . 1 The TTCN Graphical form (TTCN.GR) 25 C.2 The

20、TTCN Machine Processable form (TTCN.MP) . 25 Annex D (informative): General structure of ATS 26 Annex E (informative): Changes with respect to the previous ETS 300 052-6 27 Bibliography . 28 History 29 Parameter values - information element codings 24 ETSI STD-ETSI EN 300 052-b-ENGL L449 3400855 04b

21、L795 bL 5 ETSI EN 300 052-6 VI .3.3 (1999-1 I) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be f

22、ound in SR 000 3 14: “Intellectual Properv Rights (7PRs); Essential, orpotentially Essential, IPRs notified to ETSIin respect ofETSIstundards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy,

23、 no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European St

24、andard (Telecommunications series) has been produced by ETSI Technical Committee Signalling Protocols and Switching (SPS). The present document is part 6 of a multi-part standard covering the Digital Subscriber Signalling System No. one (DSS 1) protocol specification for the Integrated Services Digi

25、tal Network (ISDN) Multiple Subscriber Number (MSN) supplementary service, as described below: Part 1 : “Protocol specification“; Part 2: Part 3: Part 4: “Protocol Implementation Conformance Statement (PICS) proforma specification“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (

26、ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user“; “Test Suite Stnicture and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the networ

27、k“. Part 5: Part 6: National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dople): Date of withdrawal of any conflicting National Standard (dow): 29 October 1999 3 1 Januar

28、y 2000 3 1 July 2000 3 1 July 2000 ETSI STDeETSI EN 300 052-b-ENGL L999 = 3400855 0461776 8T8 6 ETSI EN 300 052-6 VI .3.3 (1999-1 1) 1 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma for the Network

29、 side of the T reference point or coincident S and T reference point (as defined in ITU-T Recommendation 1.41 1 lo) of implementations conforming to the stage three standard for the Multiple Subscriber Number (MSN) supplementary service for the pan-European Integrated Services Digital Network (ISDN)

30、 by means of the Digital Subscriber Signalling SystemNo. one (DSS1) protocol, EN 300 052-1 i. EN 300 052-5 3 specifies the Test Suite Structure and Test Purposes (TSS Multiple Subscriber Number (MSN) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part i : Proto

31、col specification“. EN 300 052-2 (Vi .2): “Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification“. EN 300 0

32、52-5 (Vi .2): “Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 5: Test Suite Structure and Test mirposes (TSS Digital Subscriber Signalling System No. one (DSS1) protocol; Signalli

33、ng network layer for circuit-mode basic call control; Part 1: Protocol specification ITU-T Recommendation 4.93 1 (1 993), modified“. 121 131 41 ISOIIEC 9646-1 : “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1 : General concepts“. ISOAEC

34、 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. ISOiEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Ab

35、stract Test Suite specification“. ISOiEC 9646-4: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4 Test realization“. ISOIIEC 9646-5: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework -

36、 Part 5: Requirements on test laboratories and clients for the conformance assessment process. ITU-T Recommendation 1.4 1 1 (1993): “ISDN user-network interfaces - reference configurations“. ETSI STD-ETSI EN 300 052-b-ENGL 1999 3400855 OYbL797 734 7 ETSI EN 300 052-6 VI .3.3 (1999-1 I) 3 Definitions

37、 and abbreviations 3. I Definitions For the purposes of the present document, the following terms and definitions apply: abstract test suite: see ISOIEC 9646-1 5 implementation under test: see ISODEC 9646-1 5 lower tester: see ISO/IEC 9646-1 5 point of control and observation: see ISODEC 9646-1 5 Pr

38、otocol Implementation Conformance Statement (PICS): see ISODEC 9646-1 5 PICS proforma: see ISOIIEC 9646-1 5 Protocol Implementation Extra Information For Testing (PEUT): see ISOIIEC 9646-1 5 PIXIT proforma: see ISODEC 9646-1 5 system under test: see ISOIIEC 9646-1 5 upper tester: see ISO/IEC 9646-1

39、5 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ASP ATM ATS CM CP ExTS IUT LT MOT MSN MTC PCO PCTR PDU PICS PIXIT PTC SUT TP TTCN UT Abstract Service Primitive Abstract Test Method Abstract Test Suite Co-ordination Message Co-ordination Point Executab

40、le Test Suite Implementation Under Test Lower Tester Means Of Testing Multiple Subscriber Number Main Test Component Point of Control and Observation Protocol Conformance Test Report Protocol Data Unit Protocol Implementation Conformance Statement Protocol Implementation extra Information for Testin

41、g Parallel Test Component System Under Test Test Purpose Tree and Tabular Combined Notation Upper Tester ETSI STD-ETSI EN 300 052-b-ENGL 1997 3400855 04bL778 b70 m 8 ETSI EN 300 052-6 V1.3.3 (1999-1 I) 4 Abstract Test Method (ATM) 4.1 Description of ATM used The requirement for testing the network I

42、UT is to focus on the behaviour of the network IUT at the user-network interface where a T reference point or coincident S and T reference point applies. Thus the IUT is the network DSSI protocol entity at a particular user-network interface and is not the whole network. It is possible to specify an

43、 ATS based on a Single party (remote) test method for such an IUT. However, it is considered that an ATS based on such an approach is of limited use as the only way to speciQ IUT generated PDUs is to use the “implicit send“ statement. Many users of such an ATS would replace the “implicit send“ state

44、ments with descriptions of the behaviour at other interfaces. An ATS based on a multi-party test method is considered to be more useful in that it is closer to how a real test suite would be constructed. Such a test method specifies behaviour at multiple network interfaces. One very important limita

45、tion here is that tests are focused on one particular interface. Thus the test system is made up one Main Test Component (MTC) and one or more Parallel Test Components (PTC), see figure 1. 4.1 .I Conventions for test components and PCOs Master pari Slave pari I I L1 pco Figure I: Multi-party test me

46、thod ETSI STDmETSI EN 300 052-b-ENGL 1999 3400855 04b1794 507 9 ETSI EN 300 052-6 V1.3.3 (1999-11) In a master/slave arrangement, the MTC is considered to be the master while the PTCs are the slaves. The “slave“ testers are only an explicit description of how to deal with the “other“ interfaces duri

47、ng the testing process, i.e. “how to make the IUT send the required message“. This means, in particular, that the verdict will only be assigned from the protocol aspects observed on the interface under test (i.e. by the “master“ tester), as it would be observed by a terminal connected to this interf

48、ace. A failure in the correlation between the protocol at the different interfaces to which the different testers are connected, i.e. in the mechanism of the functional service itself, will not cause a FAIL verdict. For instance, if the IUT fails to send a message on the tested interface after anoth

49、er interface has received the proper stimulus, the verdict will be INCONCLUSIVE. The MTC MTCA has two functions in this configuration. Firstly, it has the MTC function of controlling the one or more PTCs. Thus it is responsible for starting the PTCs and afterwards Co-ordinates activities by exchanging Co-ordination Messages (CM) with the PTCs. Secondly it is responsible for the behaviour of the Lower Tester (LT) at PCO LO. A combination of the remote and multi-party test methods is applied. As can be