EN ISO 18589-7-2016 en Measurement of radioactivity in the environment - Soil - Part 7 In situ measurement of gamma-emitting radionuclides《环境中的放射性测量 土壤-第7部分 在γ放射性核素的测量(ISO 18589-7 .pdf

《EN ISO 18589-7-2016 en Measurement of radioactivity in the environment - Soil - Part 7 In situ measurement of gamma-emitting radionuclides《环境中的放射性测量 土壤-第7部分 在γ放射性核素的测量(ISO 18589-7 .pdf》由会员分享，可在线阅读，更多相关《EN ISO 18589-7-2016 en Measurement of radioactivity in the environment - Soil - Part 7 In situ measurement of gamma-emitting radionuclides《环境中的放射性测量 土壤-第7部分 在γ放射性核素的测量(ISO 18589-7 .pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 18589-7:2013Measurement of radioactivityin the environment Soil Part 7: In situ measurement of gamma-emitting radionuclides (ISO 18589-7:2013)BS EN ISO 18589-7:2016BS EN ISO 18589-7:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation o

2、f EN ISO 18589-7:2016. It is identical to ISO 18589-7:2013. It supersedes BS ISO 18589-7:2013 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee NCE/2, Radiation protection and measurement.A list of organizations represented on this committee can be obtai

3、ned on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 90936 8ICS 13.080.01; 17.240Compli

4、ance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2013.Amendments/corrigenda issued since publicationDate Text affected31 May 2016 This corrigendum renumbers

5、BS ISO 18589-7:2013 as BS EN ISO 18589-7:2016.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 18589-7 April 2016 ICS 17.240; 13.080.01 English Version Measurement of radioactivity in the environment - Soil - Part 7: In situ measurement of gamma-emitting radionuclides (ISO 18589-7:2013) Mesu

6、rage de la radioactivit dans lenvironnement - Sol - Partie 7: Mesurage in situ des radionuclides metteurs gamma (ISO 18589-7:2013) Ermittlung der Radioaktivitt in der Umwelt - Erdboden - Teil 7: In-situ-Messung von Gammastrahlung emittierenden Radionukliden (ISO 18589-7:2013) This European Standard

7、was approved by CEN on 21 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning suc

8、h national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own

9、 language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, G

10、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN

11、G CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 18589-7:2016 EBS ISO 18589-7:2013ISO 18589-7:2013(E) ISO 2013 All rights reserved iiiContents PageForeword

12、ivIntroduction v1 Scope . 12 Normative references 13 Terms, definitions, symbols, and units 23.1 Terms and definitions . 23.2 Symbols and units 34 Principles . 64.1 Measurement method . 64.2 Uncertainties of the measurement method . 65 Equipment . 65.1 Portable in situ spectrometry system 65.2 Detec

13、tor System . 75.3 Pulse processing electronics . 85.4 Assembly jig for a detector system 95.5 Collimated detector . 96 Procedure126.1 Calibration . 126.2 Method of combined calibrations 127 Quality assurance and quality control program .177.1 General 177.2 Influencing variables 177.3 Instrument veri

14、fication. 177.4 Method verification 177.5 Quality control program 177.6 Standard operating procedure . 198 Expression of results .198.1 Calculation of activity per unit of surface area or unit of mass 198.2 Calculation of the characteristic limits and the best estimate of the measurand as well as it

15、s standard uncertainty . 198.3 Calculation of the radionuclide specific ambient dose rate 219 Test report 22Annex A (informative) Influence of radionuclides in air on the result of surface or mass activity measured by in situ gamma spectrometry .23Annex B (informative) Influence quantities 24Annex C

16、 (informative) Characteristics of germanium detectors 27Annex D (informative) Field-of-view of an in situ gamma spectrometer as a function of the photon energy for different radionuclide distributions in soil .29Annex E (informative) Methods for calculating geometry factors and angular correction fa

17、ctors33Annex F (informative) Example for calculation of the characteristic limits as well as the best estimate of the measurand and its standard uncertainty 41Annex G (informative) Conversion factors for surface or mass activity to air kerma rate and ambient dose equivalent rate for different radion

18、uclide distribution in soil .45Annex H (informative) Mass attenuation factors for soil and attenuation factors for air as a function of photon energy and deviation of G(E,V) for different soil compositions 52Bibliography .54BS EN ISO 18589-7:2016EN ISO 18589-7:2016 (E)EN ISO 18589-7:2016 (E) 3 Europ

19、ean foreword The text of ISO 18589-7:2013 has been prepared by Technical Committee ISO/TC 85 “Nuclear energy, nuclear technologies, and radiological protection” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 18589-7:2016 by Technical Committee CEN/TC 43

20、0 “Nuclear energy, nuclear technologies, and radiological protection” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting natio

21、nal standards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-C

22、ENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

23、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 18589-7:2013 has been approved by CEN as EN ISO 18589-7:2016 without any m

24、odification. BS ISO 18589-7:2013ISO 18589-7:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms, definitions, symbols, and units 23.1 Terms and definitions . 23.2 Symbols and units 34 Principles . 64.1 Measurement method . 64.2 Unc

25、ertainties of the measurement method . 65 Equipment . 65.1 Portable in situ spectrometry system 65.2 Detector System . 75.3 Pulse processing electronics . 85.4 Assembly jig for a detector system 95.5 Collimated detector . 96 Procedure126.1 Calibration . 126.2 Method of combined calibrations 127 Qual

26、ity assurance and quality control program .177.1 General 177.2 Influencing variables 177.3 Instrument verification. 177.4 Method verification 177.5 Quality control program 177.6 Standard operating procedure . 198 Expression of results .198.1 Calculation of activity per unit of surface area or unit o

27、f mass 198.2 Calculation of the characteristic limits and the best estimate of the measurand as well as its standard uncertainty . 198.3 Calculation of the radionuclide specific ambient dose rate 219 Test report 22Annex A (informative) Influence of radionuclides in air on the result of surface or ma

28、ss activity measured by in situ gamma spectrometry .23Annex B (informative) Influence quantities 24Annex C (informative) Characteristics of germanium detectors 27Annex D (informative) Field-of-view of an in situ gamma spectrometer as a function of the photon energy for different radionuclide distrib

29、utions in soil .29Annex E (informative) Methods for calculating geometry factors and angular correction factors33Annex F (informative) Example for calculation of the characteristic limits as well as the best estimate of the measurand and its standard uncertainty 41Annex G (informative) Conversion fa

30、ctors for surface or mass activity to air kerma rate and ambient dose equivalent rate for different radionuclide distribution in soil .45Annex H (informative) Mass attenuation factors for soil and attenuation factors for air as a function of photon energy and deviation of G(E,V) for different soil c

31、ompositions 52Bibliography .54BS EN ISO 18589-7:2016ISO 18589-7:2013(E)BS ISO 18589-7:2013ISO 18589-7:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is n

32、ormally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part i

33、n the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular

34、the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document

35、may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents

36、Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.The committee responsible for this document is ISO/TC 85, Nuclear energy, nuclear technologies, and radiological protection, Subcommittee SC 2, Radiological protection.ISO 18

37、589 consists of the following parts, under the general title Measurement of the radioactivity in the environment Soil: Part 1: General guidelines and definitions Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples Part 3: Measurements of gamma-emitting

38、radionuclides Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry Part 5: Measurement of strontium 90 Part 6: Measurement of gross alpha and gross beta activities Part 7: In situ measurement of gamma-emitting radionuclidesiv ISO 2013 All rights res

39、ervedBS ISO 18589-7:2013ISO 18589-7:2013(E)IntroductionIn situ gamma spectrometry is a rapid and accurate technique to assess the activity concentration of gamma-emitting radionuclides present in the top soil layer or deposited onto the soil surface. This method is also used to assess the dose rates

40、 of individual radionuclides.In situ gamma spectrometry is a direct physical measurement of radioactivity that does not need any soil samples, thus reducing the time and cost of laboratory analysis of large number of soil samples.The quantitative analysis of the recorded line spectra requires a suit

41、able area for the measurement. Furthermore, it is required to know the physicochemical properties of the soil and the vertical distribution in the soil to assess the activity of the radionuclides. ISO 2013 All rights reserved vBS EN ISO 18589-7:2016ISO 18589-7:2013(E)BS ISO 18589-7:2013ISO 18589-7:2

42、013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for whic

43、h a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all ma

44、tters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This d

45、ocument was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such

46、patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not con

47、stitute an endorsement.The committee responsible for this document is ISO/TC 85, Nuclear energy, nuclear technologies, and radiological protection, Subcommittee SC 2, Radiological protection.ISO 18589 consists of the following parts, under the general title Measurement of the radioactivity in the en

48、vironment Soil: Part 1: General guidelines and definitions Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples Part 3: Measurements of gamma-emitting radionuclides Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alph

49、a spectrometry Part 5: Measurement of strontium 90 Part 6: Measurement of gross alpha and gross beta activities Part 7: In situ measurement of gamma-emitting radionuclidesiv ISO 2013 All rights reservedBS ISO 18589-7:2013ISO 18589-7:2013(E)IntroductionIn situ gamma spectrometry is a rapid and accurate technique to assess the activity concentration of gamma-emitting radionuclides present in the top soil layer or deposited onto the soil surface. This method is also used to assess the dose rates of individual radionuclides.In situ gamma spectro