EN ISO 11733-2004 en Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test《水质 水介质中有机化合物的生物降.pdf

《EN ISO 11733-2004 en Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test《水质 水介质中有机化合物的生物降.pdf》由会员分享，可在线阅读，更多相关《EN ISO 11733-2004 en Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test《水质 水介质中有机化合物的生物降.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 11733:2004 Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test The European Standard EN ISO 11733:2004 has the status of a British Standard ICS 13.060.70 BS EN ISO 11733:2004 This Br

2、itish Standard was published under the authority of the Standards Policy and Strategy Committee on 14 July 2005 BSI 14 July 2005 ISBN 0 580 46140 8 National foreword This British Standard is the official English language version of EN ISO 11733:2004. It is identical with ISO 11733:2004. It supersede

3、s BS EN ISO 11733:1998 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EH/3, Water quality, to Subcommittee EH/3/5, Biological methods, which has the responsibility to: A list of organizations represented on this committee can be obtained on request t

4、o its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalog

5、ue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the

6、 text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cov

7、er, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 27 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsE

8、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11733 August 2004 ICS 13.060.70 Supersedes EN ISO 11733:1998 English version Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004) Qua

9、lit de leau - Dtermination de llimination et de la biodgradabilit des composs organiques en milieu aqueux - Essai de simulation des boues actives (ISO 11733:2004) This European Standard was approved by CEN on 29 July 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi

10、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Sta

11、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national sta

12、ndards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN CO

13、MMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11733:2004: E2 Foreword This

14、document (EN ISO 11733:2004) has been prepared by Technical Committee ISO/TC 147 “Water quality“ in collaboration with Technical Committee CEN/TC 230 “Water analysis“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publicat

15、ion of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. This document supersedes EN ISO 11733:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the

16、 following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain,

17、Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 11733:2004 has been approved by CEN as EN ISO 11733:2004 without any modifications. EN ISO 11733:2004 Reference number ISO 11733:2004(E) INTERNATIONAL STANDARD ISO 11733 Second edition 2004-08-01 Water quality Determination o

18、f the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test Qualit de leau Dtermination de llimination et de la biodgradabilit des composs organiques en milieu aqueux Essai de simulation des boues actives EN ISO 11733:2004 iiEN ISO 11733:2004 iii

19、 Contents Page Foreword iv 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 2 4 Principle . 3 5 Test environment 4 6 Reagents 4 7 Apparatus. 7 8 Procedure. 8 8.1 General . 8 8.2 Preparation of the inoculum 8 8.3 Performance of the test 8 9 Calculation and expression of results 11 9.1 Ca

20、lculation of the degree of elimination. 11 9.2 Expression of results 12 9.3 Indication of biodegradation 12 9.4 Biodegradation of the organic medium 12 10 Validity of the test . 12 11 Test report 13 Annex A (informative) Modification of the activated sludge simulation test for nitrifying- denitrifyi

21、ng sewage treatment plants . 14 Annex B (informative) Coupling of the test units (optional) 18 Annex C (informative) Test systems. 19 Annex D (informative) Effects of sludge retention time on effluent concentration . 22 Annex E (informative) Example of an elimination/degradation curve. 25 Bibliograp

22、hy . 26EN ISO 11733:2004 iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body intereste

23、d in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Com

24、mission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the techni

25、cal committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO sh

26、all not be held responsible for identifying any or all such patent rights. ISO 11733 was prepared by Technical Committee ISO/TC 147, Water quality, Subcommittee SC 5, Biological methods. This second edition cancels and replaces the first edition (ISO 11733:1995), which has been technically revised.

27、1 Water quality Determination of the elimination and biodegradability of organic compounds in an aqueous medium Activated sludge simulation test WARNING AND SAFETY PRECAUTIONS Activated sludge and sewage contain potentially pathogenic organisms, therefore appropriate precautions should be taken when

28、 handling them. Toxic test compounds and those whose properties are unknown should be handled with care. 1 Scope This International Standard specifies a method for the determination of the elimination and the biodegradability of organic compounds by aerobic micro-organisms. The conditions described

29、simulate a waste-water treatment plant. Two test systems can be used: activated sludge plants or porous pots. The tests can optionally be performed under conditions of nitrification and denitrification (Annex A) and coupling of the units (Annex B). The method applies to organic compounds which, unde

30、r the conditions of the test, are a) soluble in tap water at the test concentration and not expected to be transformed to insoluble metabolites if biodegradation, in addition to elimination, is determined; b) poorly water-soluble, but which are satisfactorily dispersible in water and allow detection

31、 with suitable analytical means (e.g. organic carbon measurements); c) non-volatile, or which have a negligible vapour pressure under the test conditions; d) not inhibitory to the test micro-organisms at the concentration chosen for the test. Inhibitory effects can be determined by using a suitable

32、test method (e.g. ISO 8192 15or ISO 15522 27 ). Compounds inhibitory at concentrations used in this test may be tested at concentrations less than their EC 20value, followed by higher practical concentrations after a period of acclimatization. The method can also be used to measure the biodegradatio

33、n and elimination of dissolved organic compounds in waste water (also called “test compound” in the method). If more or different information is required to predict the behaviour of test compounds or waste water in a treatment plant, other degradation tests may be performed. For appropriate use of t

34、his method and for alternative biodegradation methods, see ISO/TR 15462 and for general information on biotesting, see ISO 5667-16. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies.

35、For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 5667-16, Water quality Sampling Part 16: Guidance on biotesting of samples ISO 10634, Water quality Guidance for the preparation and treatment of poorly water-soluble organic compounds for t

36、he subsequent evaluation of their biodegradability in an aqueous medium ISO/TR 15462, Water quality Selection of tests for biodegradability EN ISO 11733:2004 2 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 accelerating removal phase activat

37、ed sludge simulation test time from the end of the lag phase until the plateau phase is reached, during which the biodegradation of a compound or organic matter increases NOTE Accelerating removal phase is expressed in days. 3.2 activated sludge biomass and inert matter produced in the aerobic treat

38、ment of wastewater by the growth of bacteria and other micro-organisms in the presence of dissolved oxygen 3.3 chemical oxygen demand COD mass concentration of oxygen equivalent to the amount of a specified oxidant consumed by a chemical compound or organic matter when a water sample is treated with

39、 that oxidant under defined conditions NOTE COD is expressed, in this case, as milligrams of oxygen consumed per milligram or per gram of test compound 3.4 concentration of suspended solids of an activated sludge amount of solids obtained by filtration or centrifugation at known conditions of a know

40、n volume of activated sludge and drying at about 105 C to constant weight 3.5 degree of elimination biodegradation activated sludge simulation test mean eliminated (biodegraded) amount of a chemical compound or organic matter, calculated from the measured concentrations in the inlet and the outlet o

41、f the system NOTE The degree of elimination (biodegradation) is determined when no further elimination can be measured and is expressed as a percentage. 3.6 denitrification reduction of nitrate and nitrite to the end product nitrogen (in the form of the gas) by the action of bacteria 3.7 dissolved o

42、rganic carbon DOC part of the organic carbon in a sample of water which cannot be removed by specified phase separation NOTE Phase separation may be obtained, for example, by centrifugation of the water sample at 40 000 m/s 2for 15 min or by membrane-filtration using membranes with a pore size of 0,

43、45 m. 3.8 lag phase activated sludge simulation test time from the start of a test until a significant elimination (biodegradation) of a compound or organic matter can be measured (the beginning of the accelerated removal phase) NOTE The lag phase is expressed in days. EN ISO 11733:2004 3 3.9 nitrif

44、ication oxidation of ammonium salts by bacteria where usually the intermediate product is nitrite and the end product nitrate 3.10 plateau phase activated sludge simulation test time from the end of the accelerating removal phase until the end of a test in which the biodegradation of a compound or o

45、rganic matter is in a steady state NOTE The plateau phase is expressed in days. 3.11 pre-exposure pre-incubation of an inoculum in the presence of the test compound or organic matter, with the aim of enhancing the ability of this inoculum to biodegrade the test compound by adaptation and/or selectio

46、n of the micro-organisms 3.12 pre-conditioning pre-incubation of an inoculum under the conditions of the subsequent test in the absence of the test compound and other organic matter, with the aim of improving the performance of the test by acclimatization of the micro-organisms to the test condition

47、s 3.13 primary biodegradation structural change (transformation) of a chemical compound by micro-organisms resulting in the loss of a specific property 3.14 total organic carbon TOC all the carbon present in organic matter which is dissolved and suspended in the water 3.15 ultimate aerobic biodegrad

48、ation breakdown of a chemical compound or organic matter by micro-organisms in the presence of oxygen to carbon dioxide, water and mineral salts of any other elements present (mineralization) and the production of new biomass 4 Principle This method is designed to determine the elimination and, if p

49、ossible, the primary or ultimate biodegradation of water-soluble organic compounds from water by aerobic micro-organisms in a continuously operating test system simulating the activated-sludge process. An easily biodegradable organic medium and the organic test compound are the sources of carbon and energy for the micro-organisms. Two test units (activated sludge plants or porous pots) are run in parallel under identical conditions, nor