EN IEC 62148-1-2018 en Fibre optic active components and devices - Package and interface standards - Part 1 General and guidance.pdf

《EN IEC 62148-1-2018 en Fibre optic active components and devices - Package and interface standards - Part 1 General and guidance.pdf》由会员分享，可在线阅读，更多相关《EN IEC 62148-1-2018 en Fibre optic active components and devices - Package and interface standards - Part 1 General and guidance.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Fibre optic active components and devices - Package and interface standardsPart 1: General and guidance (IEC 62148-1:2017)BS EN IEC 62148-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62148-1 February 2

2、018 ICS 33.180.01 Supersedes EN 62148-1:2002 English Version Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2017) Composants et dispositifs actifs fibroniques - Normes de botier et dinterface - Partie 1: Gnralits et recommandat

3、ions (IEC 62148-1:2017) Aktive Lichtwellenleiterbauelemente und -gerte - Gehuse- und Schnittstellennormen - Teil 1: Allgemeines und Leitfaden (IEC 62148-1:2017) This European Standard was approved by CENELEC on 2017-10-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations

4、 which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.

5、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

6、CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Neth

7、erlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Mana

8、gement Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62148-1:2018 E National forewordThis British Standard is the UK implementation of EN IEC 621481:2018. It is identical to I

9、EC 621481:2017. It supersedes BS EN 621481:2002, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can be obtained on request to its secretary.This pub

10、lication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 95101 5ICS 33.180.01Compliance with a British Standard cannot confer immuni

11、ty from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 621481:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM

12、 EN IEC 62148-1 February 2018 ICS 33.180.01 Supersedes EN 62148-1:2002 English Version Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2017) Composants et dispositifs actifs fibroniques - Normes de botier et dinterface - Partie

13、1: Gnralits et recommandations (IEC 62148-1:2017) Aktive Lichtwellenleiterbauelemente und -gerte - Gehuse- und Schnittstellennormen - Teil 1: Allgemeines und Leitfaden (IEC 62148-1:2017) This European Standard was approved by CENELEC on 2017-10-05. CENELEC members are bound to comply with the CEN/CE

14、NELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre

15、 or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status

16、as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

17、uxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnisch

18、e Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62148-1:2018 E BS EN IEC 621481:2018EN IEC 62148-1:2018 2 European foreword The text of document

19、 86C/1406A/CDV, future edition 2 of IEC 62148-1, prepared by SC 86C “Fibre optic systems and active devices“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62148-1:2018. The following dates are fixed: latest date by which the document has

20、 to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-08-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-02-16 This document supersedes EN 62148-1:2002. EN IEC 62148-1:2018 inclu

21、des the following significant technical changes with respect to EN 62148-1:2002: Addition of a free space optical coupling interface in Clause 5. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsibl

22、e for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62148-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indic

23、ated: IEC 60130 Series NOTE Harmonized in EN 60130 Series. IEC 60191 Series NOTE Harmonized in EN 60191 Series. IEC 60603 Series NOTE Harmonized in EN 60603 Series. IEC 60603-1 NOTE Harmonized as EN 60603-1. IEC 60603-2 NOTE Harmonized as EN 60603-2. IEC 60603-3 NOTE Harmonized as EN 60603-3. IEC 60

24、603-4 NOTE Harmonized as EN 60603-4. IEC 60603-5 NOTE Harmonized as EN 60603-5. IEC 60603-6 NOTE Harmonized as EN 60603-6. IEC 60603-7 NOTE Harmonized as EN 60603-7. IEC 60603-8 NOTE Harmonized as EN 60603-8. IEC 60603-12 NOTE Harmonized as EN 60603-12. IEC 60603-13 NOTE Harmonized as EN 60603-13. I

25、EC 60603-14 NOTE Harmonized as EN 60603-14. IEC 60793 Series NOTE Harmonized in EN 60793 Series. IEC 60874 Series NOTE Harmonized in EN 60874 Series. IEC 61076 Series NOTE Harmonized in EN 61076 Series. IEC 61300 Series NOTE Harmonized in EN 61300 Series. BS EN IEC 621481:2018EN IEC 62148-1:2018 3 A

26、nnex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition

27、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest ve

28、rsions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60191-1 - Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices EN 60191-1 - IEC 60794 Seri

29、es Optical fibre cables EN 60794 Series IEC 61754 Series Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces EN 61754 Series IEC 62148 Series Fibre optic active components and devices - Package and interface standards EN 62148 Series ISO 1101 - Geometrical p

30、roduct specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out EN ISO 1101 - BS EN IEC 621481:2018 2 IEC 62148-1:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Classification . 7 5 Spe

31、cifications of optical interfaces . 7 5.1 General . 7 5.2 Optical connector interfaces (types 1 and 2) . 7 5.3 Pigtail interfaces (types 3 and 4) . 8 5.4 Free space optical coupling interface (types 5 and 6) 8 5.5 Optical port assignments . 8 6 Specifications of electrical interfaces . 8 6.1 General

32、 . 8 6.2 Electrical connector interfaces (types 2, 4 and 6) 8 6.3 Non-connector type interfaces (types 1, 3 and 5) 8 6.4 Numbering of electrical terminals 8 6.5 Electrical terminal assignment 8 7 Outline and footprint of active components and devices . 9 7.1 Drawings of case outline . 9 7.2 Drawings

33、 of footprint . 9 7.3 Mechanical fixturing 9 Bibliography 10 BS EN IEC 621481:2018IEC 62148-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PACKAGE AND INTERFACE STANDARDS Part 1: General and guidance FOREWORD 1) The International Electrotechni

34、cal Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this

35、end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Co

36、mmittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in

37、accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from al

38、l interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held r

39、esponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diver

40、gence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC m

41、arks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual expe

42、rts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC P

43、ublication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC P

44、ublication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62148-1 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This bilingu

45、al version (2017-11) corresponds to the monolingual English version, published in 2017-08. This second edition cancels and replaces the first edition, published in 2002, and constitutes a technical revision. This edition includes the following significant technical change with respect to the previou

46、s edition: addition of a free space optical coupling interface in Clause 5. BS EN IEC 621481:2018 4 IEC 62148-1:2017 IEC 2017 The text of this International Standard is based on the following documents: CDV Report on voting 86C/1406A/CDV 86C/1466/RVC Full information on the voting for the approval o

47、f this International Standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62148 series, published under

48、 the general title Fibre optic active components and devices Package and interface standards, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the

49、 data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN IEC 621481:2018IEC 62148-1:2017 IEC 2017 5 INTRODUCTION Fibre optic active components and devices are used to convert electrical signals into optical signals or vice versa. The optical performance criteria are generally well specified for a number of internationally agreed application areas, for example, consulting ITU-T Recommendations ori