EN 62403-2006 en High density recording format on CD-R RW disc system - HD-BURN format《CD-R RW磁盘系统上的高密度记录格式 HD-BURN格式 IEC 62403-2005》.pdf

《EN 62403-2006 en High density recording format on CD-R RW disc system - HD-BURN format《CD-R RW磁盘系统上的高密度记录格式 HD-BURN格式 IEC 62403-2005》.pdf》由会员分享，可在线阅读，更多相关《EN 62403-2006 en High density recording format on CD-R RW disc system - HD-BURN format《CD-R RW磁盘系统上的高密度记录格式 HD-BURN格式 IEC 62403-2005》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN62403:2006High density recording format on CD-R/RW disc system HD-BURN formatThe European Standard EN 62403:2006 has the status of a British StandardICS 35.220.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3

2、g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 62403:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2006 BSI 2006ISBN 0 580 48416 5National forewordThis British Standard is the official En

3、glish language version of EN 62403:2006. It is identical with IEC 62403:2005.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems and equipment, which has the responsibility to: A list of organizations represented on this committee

4、 can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search”

5、 facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obliga

6、tions. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of page

7、sThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 30, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STA

8、NDARD EN 62403 NORME EUROPENNE EUROPISCHE NORM April 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rig

9、hts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62403:2006 E ICS 35.220.30 English version High density recording format on CD-R/RW disc system - HD-BURN format (IEC 62403:2005) Format denregistrement haute densit sur un systme disque CD-R/RW - Fo

10、rmat HD-BURN (CEI 62403:2005) Aufzeichnungsformat hoher Dichte fr CD-R/RW-Systeme - HD-BURN-Format (IEC 62403:2005) This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving th

11、is European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versio

12、ns (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of A

13、ustria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword

14、 The text of the International Standard IEC 62403:2005, prepared by technical area 7: Moderate data rate storage media, equipment and systems of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the formal vote and was approved by CENELEC as EN 62403 on 2006-02-01 witho

15、ut any modification. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-02-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow)

16、2009-02-01 The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is claimed that compliance with this document may involve the use of patents. The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent right. The holde

17、r of this patent right has assured the IEC that he is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with the IEC. Information may be obta

18、ined from: Sanyo Electric Co., Ltd. 5-5 Keihan-hondori 2-chome Moriguchi City, Osaka, 570-8677, Japan Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC and CENELEC shall not be held responsible

19、for identifying any or all such patent rights. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62403:2005 was approved by CENELEC as a European Standard without any modification. _ 2 EN 62403:2006CONTENTS 1 2 3 4 4.1 4.2 5 6 6.1 6.2 6.3 7 7.1 7.2 7

20、.3 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9 3 EN 62403:2006Scope.5 Normative references .5 Terms and definitions .6 Convention and notations .7 Representation of numbers .7 Names.8 List of acronyms .8 General requirements.9 Environment9 Unrecorded disc 10 Recorded disc .10 Mechanical and physical cha

21、racteristics .10 Mechanical parameters .10 Optical parameters 10 Recording parameters .10 Disc format.10 Track format10 Data frame format .12 ECC block format 12 Recording frames 12 Physical sectors 12 Sector number.12 Format of the inner area12 Format of the user data area .21 Format of the lead-ou

22、t area .21 File system.21 Annex A (normative) A standard disc 22 Annex B (normative) ATIP synchronization rule .28 Annex C (normative) General linking rules (ATIP) 29 Figure 1 Track layout .11 Figure 2 Sector structure .11 Figure 3 PCA structure 12 Figure 4 Lead-in (PMD) data structure .13 Figure 5

23、Multi-session structure .13 Figure 6 Lead-in (PMD) data structure .14 Figure A.1 Read only optical pick up 22 Figure A.2 Recorder optical pick up .23 Figure A.3 Modulation amplitude and signal asymmetry.25 Figure A.4 General system diagram for jitter measurement 25 Annex ZA (normative) Normative ref

24、erences to international publications with theircorresponding European publications 30 4 EN 62403:2006Figure B.1 ATIP synchronization rule .28 Figure C.1 Write start for general linking rules (ATIP) 29 Figure C.2 Write stop for general linking rules (ATIP) 29 Table 1 PMA padding data format13 Table

25、2 TPMA structure-1 14 Table 3 TPMA structure-2 14 Table 4 TPMA structure-3 15 Table 5 Initial data of PMD lead-in of disc information15 Table 6 Write type16 Table 7 Link size16 Table 8 PMD-1.17 Table 9 PMD-1 item detail18 Table 10 PMD lead-in start address .18 Table 11 Media information19 Table 12 P

26、oint field19 Table 13 PMD-2.19 Table 14 PMD-3.20 Table 15 PMD-4.20 Table 16 PSI20 Table 17 PMD lead-in start address .21 Table 18 Media information21 Figure A.6 Write strategy pulse for CD-RW disc.27 Figure A.5 Write strategy pulse26 HIGH DENSITY RECORDING FORMAT ON CD-R/RW DISC SYSTEMS HD-BURN FORM

27、AT 1 Scope This International Standard specifies the HD-BURN format applied to CD-R/RW discs. The HD-BURN system is capable of recording the information in double density compared to the conventional CD-R/RW disc. It enables the realization of products with high reliability, high speed and interchan

28、geability, and is especially suitable for consumer applications with high cost-performance. This document describes: the physical characteristics for the recording and playback; the track structure of a disc; the data structure in the track; logical format structure. 2 Normative references The follo

29、wing references are indispensable for the application of this document. For dated references, only the cited edition applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60908, Audio recording Compact disc digital audio system ISO/IEC

30、 16448:2002, Information technology 120 mm DVD Read-only disk ISO/IEC 20563, Information technology 80 mm (1,23 Gbytes per side) and 120 mm (3,95 Gbytes per side) DVD-recordable disc (DVD-R) IEC 62291:2002, Multimedia data storage Application program interface for UDF based file systems ISO 9660:198

31、8, Volume and file structure of CD-ROM for Information Interchange ISO/IEC 13346-1:1995, Information technology Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange Part 1: General The Red Book: Compact disk digital Audio System Desc

32、ription Version, May 1999 Sony/Philips The Orange Book part2: Recordable compact disk systems, Part2 CD-R Version 3.1, Sony/Philips The Orange Book part 3: Recordable compact disk system, Part3 CD-RW Volume 3, Ultra-Speed Ver 1.0 NOTE The Red book and Orange book can be obtained from Sony/Philips. 5

33、 EN 62403:20063 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 absolute time in pre-groove ATIP time-code information contained in the pre-groove with an additional modulation of the wobble 3.2 access guard area AGA preamble data area for read

34、ing the following ECC blocks 3.3 HD-BURN high-density write system at CD-R/RW disc 3.4 land pre pit LPP pits embossed on the land during the manufacture of the disc substrate, which contain address information 3.5 multi-session disc constituted by some sessions 3.6 non CD sector sector, which has a

35、different structure from the CD 3.7 physical sector number PSN serial number, which is allocated to physical sectors on the disc 3.8 pre-groove guidance track in which clocking and time code information is stored by means of an FM modulated wobble 3.9 program memory data PMD information, which is de

36、scribed on the recording program of the disc, including information on each recording mode 3.10 program start information PSI start address of the first lead-in 6 EN 62403:20063.11 Reed-Solomon product code RSPC method of an error correction code, which corrects errors by multiple bits 3.12 sector s

37、mallest addressable part of a track in the information zone of a disc that can be accessed independently of other addressable parts 3.13 session area on the disc consisting of lead-in area, program area and lead-out area 3.14 synchronization frame group of 1488 channel bits, which is representing a

38、synchronization pattern 3.15 temporary program memory area TPMA area, which is used for intermediate storage 3.16 track path, which is followed by the focus of the optical beam during one revolution of the disc 4 Convention and notations 4.1 Representation of numbers A measured value is rounded off

39、to the least significant digit of the corresponding specified value. It implies that a specified value of 1,26 with a positive tolerance of +0,01, and a negative tolerance of 0,02 allows a range of measured values from 1,235 to 1,275. Letters and digits in parentheses represent numbers in hexadecima

40、l notation. The setting of a bit is denoted by ZERO or ONE. Numbers in binary notation and bit combinations are represented by strings of 0 and 1. Numbers in binary notation and bit combinations are shown with the most significant bit to the left. Negative values of numbers in binary notation are gi

41、ven in Twos complement. In each field the data is recorded so that the most significant byte (byte 0) is recorded first. Within each byte the least significant bit is numbered 0 and is recorded first, the most significant bit (numbered 7 in an 8-bit byte) is recorded last. This order of recording ap

42、plies also to the data input of the error detection and correction circuits and to their output. 7 EN 62403:20064.2 Names The names of entities, for example specific tracks, fields, etc., are given with a capital letter. 5 List of acronyms ADB Address Data Bit ALPC Auto Laser Power Control ASYM Asym

43、metry BCD Binary Coded Decimal BP Byte Position BPF Band Pass FilterCD-R Compact Disk Recordable CD-RW Compact Disk ReWritable CDS Codeword Digital Sum CD-WO Compact Disk Write Once CLV Constant Linear VelocityCRC Cyclic Redundancy Check DCB Data Channel BitDSV Digital Sum ValueDVD Digital Versatile

44、 Disc ECC Error Correction CodeEDC Error Detection Code HDB High Density Burn ( = HD-BURN) HF High FrequencyID Identification Data IED ID Error Detection code LOS Lead-out Start Address LPF Low-Pass Filter LSB Least Significant Byte MSB Most Significant Byte NRZI Non Return to Zero Inverted OPC Opti

45、mum Power ControlPAD PaddingPCA Power Calibration Area PI Parity of Inner-code PMA Program Memory Area PO Parity of Outer-code PUH Pick Up Head R/W RewritableRID Recorder Identifier RS Reed-Solomon 8 EN 62403:20066 General requirements 6.1 Environment 6.1.1 Testing environment The test environment i

46、s the environment where the air immediately surrounding the disc has the following properties. For dimensional measurements For other measurements temperature: 23 C 2 C 15 C 35 C relative humidity: 45 % to 55 % 45 % to 75 % atmospheric pressure: 60 kPa to 106 kPa 60 kPa to 106 kPa Unless otherwise s

47、tated, all tests and measurements shall be made in this test environment. 6.1.2 Operating environment 6.1.2.1 Recorded and unrecorded discs This International Standard requires that an optical disc which meets all mandatory requirements of this International Standard in the specified test environmen

48、t provides data interchange over the specified ranges of environmental parameters in the operating environment. Discs used for data interchange shall be operated under the following conditions, when mounted in the drive supplied with voltage and measured on the outside surface of the disc. The disc

49、exposed to storage conditions shall be conditioned in the operating environment for at least 2 h before operating. temperature: 25 C to 70 C relative humidity: 3 % to 95 % absolute humidity: 0,5 g/m3to 60,0 g/m3temperature gradient: 15 C/h maximum relative humidity gradient: 10 %/h maximum There shall be no condensation of moisture on the disc. 6.1.2.2 Unrecorded disc environmental conditions during recording The d