EN 60704-2-7-1998 en Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2 Particular Requirements for Fans《家用和类似用途电器 测定空中.pdf

《EN 60704-2-7-1998 en Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2 Particular Requirements for Fans《家用和类似用途电器 测定空中.pdf》由会员分享，可在线阅读，更多相关《EN 60704-2-7-1998 en Household and Similar Electrical Appliances Test Code for the Determination of Airborne Acoustical Noise Part 2 Particular Requirements for Fans《家用和类似用途电器 测定空中.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 STD=BSI BS EN b0704-2-7-ENGL 1998 W Lb24669 Ob94418 O41 BRITISH STANDARD Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2. Particular requirements for fans The European Standard EN 60704-2-7 : 1998 has the status of a British Standard

2、 ICs 17.140.20, 23.120 3s EN $0704-2-7 : 1998 STD-BSI BS EN b0704-2-7-ENGL 1998 m 1624669 Ob94419 T88 m BS EN 607042-7 : 1998 National foreword This British Standard is the Engish language version of EN 60704-2-7 : 1998. It is identid with IEC 60704-2-7 : 1997. The UK participation in its preparatio

3、n was entrusted to Technical Commiaee CPy59, Performance of household electrical appliances, which has the responsibility to: - aid enquirers to understand the text; - present to the responsible internationavEuropean committee any enquiries on the interpretation, or proposals for change, and keep th

4、e UK interests informed; - monitor related international and European developments and promulgate them in the UK A list OP organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number.

5、 For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an a

6、nnex which lists normative references to international publications with their corresponing European publications. The British Standards which implement these intemational or European publicaiions may be found in the BSI Standards Catalogue under the section entitied International Standards Correspo

7、ndence Index, or by using the Find facility of the BSI standards Electronic Catalogue. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an ins

8、ide back cover and a back cover. This British Standard, having been prepared under the direction of the Electrokchnicai Sector Board, was published under the authority of the Standards Board and comes into effect on 15 April 1998 O BSI 1998 ISBN O 680 28878 1 Amendments issued since publication Amd.

9、No* ID - or on the second reflecting plane of the free field over a reflecting plane environment. The height between the centre of the appliance and the floor shall be 1,5 m I: 0,05 m. In all cases, care shall be taken to follow the instructions given by the manufacturer and to avoid any structure-b

10、orne noise. Care shall be taken to avoid any restriction of the airflow. Attention shall be paid to avoid any difference of pressure between the rooms concerned (or atmosphere), in order to avoid unwanted load on the fan. 6.5.5 Not applicable. 6.5.7 Not applicable. 7 Measurement of sound pressure le

11、vels II . This clause of Part 1 is applicable except as follows: Addition: The use of a windscreen is mandatory. 7.1 Microphone array, measurement surface and RSS location for essentially free-field conditions over reflecting planefs) 7.1.1 Addition: This measurement surface shall be used for table,

12、 pedestal and ceiling fans. Table fans are placed on the floor. This measurement surface shall not be used for wall fans and window fans. 7.1.2 and 7.1.3 Not applicable. STD=BSI BS EN 60704-2-7-ENGL 1998 = Lb24bb9 Obq4428 TqO Page 9 EN 60704-2-7 : 1998 7.1.4 Replacement: For partition (wall and wind

13、ow) fans and wall-mounted table fans, the measurement surface is a hemisphere, with 10 microphone positions as specified in figure 101, centred in the projection of the geometrical centre of the reference box on the vertical plane, the co-ordinate system describing the microphone positions being loc

14、ated with the x and y axis in the vertical reflecting plan and the z axis horizontal perpendicular to it. The x axis lies in the horizontal central plane of the reference box. The front of the fan is directed towards the z axis. The area of this measurement surface is S = 2 Fax: 0181 996 7400. BSI o

15、Eers members an individual updating service called PLUS which ensures that Subscribers automatically receive the Wst editions of standards. Buying standards Orders for all BSI, intedonal and foreign standards publications should be addressed to Customer Services, Sales Department at Chiswick Tek 018

16、1 996 7000; Fax: 0181 996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Euro

17、pean and international standards through its Library, the Standardline Database, the BSI Information Technology Service (BITS) and its Technid Help to Exporters Service. Contact the information Department at Chiswick kl: 0181 996 7111; Fax: 0181 996 7048. Subscribing members of BSI are kept up to da

18、te with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Customer Services, Membership at Chiswick Tel: 0181 996 7002; Fax: 0181 996 7001. Copyright Copyright subsists in aii BSI publications. BSI also holds

19、the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the copyright, Designs and Patents Act 1988 no exh-act may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording

20、 or otherwise - without prior written permission from BSL This does not preclude the fi-ee use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained If permission is granted, the tem may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copynght Manager, MI, 389 Chiswick High Road, London W4 4AL