EN 60384-24-2015 en Fixed capacitors for use in electronic equipment - Part 24 Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polyme.pdf

《EN 60384-24-2015 en Fixed capacitors for use in electronic equipment - Part 24 Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polyme.pdf》由会员分享，可在线阅读，更多相关《EN 60384-24-2015 en Fixed capacitors for use in electronic equipment - Part 24 Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polyme.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationFixed capacitors for use in electronic equipmentPart 24: Sectional specification Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyteBS EN 60384-24:2015National forewordThis British Standard is the UK implementation of EN 60384-24:20

2、15. It isidentical to IEC 60384-24:2015. It supersedes BS EN 60384-24:2006 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on

3、request to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 78451 4ICS 31.060.40; 31.060.50Compliance w

4、ith a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60384-24:2015EUROPEAN STA

5、NDARD NORME EUROPENNE EUROPISCHE NORM EN 60384-24 October 2015 ICS 31.060.40; 31.060.50 Supersedes EN 60384-24:2006 English Version Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid

6、 electrolyte (IEC 60384-24:2015) Condensateurs fixes utiliss dans les quipements lectroniques - Partie 24: Spcification intermdiaire - Condensateurs fixes lectrolytiques au tantale pour montage en surface lectrolyte solide en polymre conducteur (IEC 60384-24:2015) Festkondensatoren zur Verwendung in

7、 Gerten der Elektronik -Teil 24: Rahmenspezifikation -Oberflchenmontierbare Tantal-Elektrolyt-Kondensatoren mit leitfhigem Polymerfestkrper-Elektrolyten (IEC 60384-24:2015) This European Standard was approved by CENELEC on 2015-08-26. CENELEC members are bound to comply with the CEN/CENELEC Internal

8、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

9、ELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the officia

10、l versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

11、ta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC

12、Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60384-24:2015 E BS EN 60384-24:2015EN 60384-24:2015 2 European Foreword The text of document 40/2382/FDIS, future edition 2 of

13、 IEC 60384-24, prepared by IEC TC 40, “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-24:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by public

14、ation of an identical national standard or by endorsement (dop) 2016-05-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-08-26 This document supersedes EN 60384-24:2006. Attention is drawn to the possibility that some of the elements of thi

15、s document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60384-24:2015 was approved by CENELEC as a European Standard without any modification. In the

16、official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60384-3 NOTE Harmonized as EN 60384-3. IEC 60068-2-58:2004 NOTE Harmonized as EN 60068-2-58:2004. BS EN 60384-24:2015EN 60384-24:2015 3 Annex ZA (normative) Normative references to international

17、 publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the re

18、ferenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available h

19、ere: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60063 - Preferred number series for resistors and capacitors EN 60063 - IEC 60068-1 2013 Environmental testing - Part 1: General and guidance EN 60068-1 2014 IEC 60384-1 2008 Fixed capacitors for use in electronic equipment - Part 1: Generic

20、 specification EN 60384-1 2009 IEC 61193-2 2007 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 2007 ISO 3 - Preferred numbers; Series of preferred numbers - - BS EN 60384-24:2015 2 IEC 60384-24:2015 IEC 2015 CO

21、NTENTS FOREWORD . 5 1 General . 7 1.1 Scope . 7 1.2 Object . 7 1.3 Normative references 7 1.4 Information to be given in a detail specification . 7 1.4.1 General . 7 1.4.2 Outline drawing and dimensions 8 1.4.3 Mounting . 8 1.4.4 Ratings and characteristics 8 1.4.5 Marking . 9 1.5 Terms and definiti

22、ons 9 1.6 Marking . 9 1.6.1 General . 9 1.6.2 Information for marking 9 1.6.3 Marking on capacitors 9 1.6.4 Marking on packaging 9 2 Preferred ratings and characteristics . 9 2.1 Preferred characteristics . 9 2.2 Preferred values of ratings 10 2.2.1 Nominal capacitance (CN) . 10 2.2.2 Tolerance on n

23、ominal capacitance . 10 2.2.3 Rated voltage (UR) 10 2.2.4 Category voltage (UC) . 10 2.2.5 Surge voltage (URSor UCS) . 10 2.2.6 Rated temperature . 10 3 Quality assessment procedures . 11 3.1 Primary stage of manufacture . 11 3.2 Structurally similar components 11 3.3 Certified test records of relea

24、sed lots 11 3.4 Qualification approval procedures . 11 3.4.1 General . 11 3.4.2 Qualification approval on the basis of the fixed sample size procedure 11 3.4.3 Tests . 12 3.5 Quality conformance inspections . 19 3.5.1 Formation of inspection lots . 19 3.5.2 Test schedule 20 3.5.3 Delayed delivery 20

25、 3.5.4 Assessment levels . 20 4 Test and measurement procedures 21 4.1 Preliminary drying . 21 4.2 Measuring conditions 21 4.3 Mounting . 21 4.4 Visual examination and check of dimensions 21 4.4.1 General . 21 4.4.2 Visual examination and check of dimensions . 21 BS EN 60384-24:2015IEC 60384-24:2015

26、 IEC 2015 3 4.4.3 Requirements 21 4.5 Electrical tests 22 4.5.1 Leakage current . 22 4.5.2 Capacitance 22 4.5.3 Tangent of loss angle (tan ) . 22 4.5.4 Equivalent series resistance (if required) . 23 4.6 Resistance to soldering heat . 23 4.6.1 General . 23 4.6.2 Initial inspections . 23 4.6.3 Test c

27、onditions 23 4.6.4 Recovery . 23 4.6.5 Final inspections and requirements 23 4.7 Solderability 23 4.7.1 General . 23 4.7.2 Final inspections and requirements 23 4.8 Shear test . 23 4.9 Substrate bending test (if required) . 24 4.9.1 General . 24 4.9.2 Initial inspections . 24 4.9.3 Test conditions 2

28、4 4.9.4 Final inspections and requirements 24 4.10 Rapid change of temperature 24 4.10.1 General . 24 4.10.2 Initial inspections . 24 4.10.3 Test conditions 24 4.10.4 Recovery . 24 4.10.5 Final inspections and requirements 24 4.11 Climatic sequence. 24 4.11.1 General . 24 4.11.2 Initial inspections

29、. 24 4.11.3 Dry heat 25 4.11.4 Damp heat, cyclic, test Db, first cycle 25 4.11.5 Cold. 25 4.11.6 Damp heat, cyclic, test Db, remaining cycles . 25 4.11.7 Recovery . 25 4.11.8 Final inspections and requirements 25 4.12 Damp heat, steady state . 25 4.12.1 General . 25 4.12.2 Initial inspections . 25 4

30、.12.3 Test conditions 25 4.12.4 Recovery . 25 4.12.5 Final inspections and requirements 25 4.13 Characteristics at high and low temperature 26 4.13.1 General . 26 4.13.2 Initial inspections and requirements . 26 4.14 Surge voltage . 26 4.14.1 General . 26 4.14.2 Initial inspections . 26 4.14.3 Test

31、conditions 26 BS EN 60384-24:2015 4 IEC 60384-24:2015 IEC 2015 4.14.4 Recovery . 26 4.14.5 Final inspections and requirements 26 4.15 Endurance 26 4.15.1 General . 26 4.15.2 Initial inspections . 27 4.15.3 Test conditions 27 4.15.4 Recovery . 27 4.15.5 Final inspections and requirements 27 4.16 Comp

32、onent solvent resistance (if required) . 27 4.17 Solvent resistance of marking (if required) 27 4.18 High surge current (if required) . 27 4.19 Storage at high temperature 27 4.19.1 General . 27 4.19.2 Initial inspections . 27 4.19.3 Test conditions 27 4.19.4 Recovery . 27 4.19.5 Final inspections a

33、nd requirements 28 Bibliography 29 Table 1 Category and surge voltages . 11 Table 2 Category and surge voltages . 11 Table 3 Sampling plan for qualification approval, assessment level EZ 13 Table 4 Test schedule for qualification approval (1 of 6) 14 Table 5 Lot-by-lot inspection 20 Table 6 Periodic

34、 inspection 21 BS EN 60384-24:2015IEC 60384-24:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 24: Sectional specification Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte FOREWORD 1) The

35、International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and

36、electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical comm

37、ittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization fo

38、r Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee

39、 has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is acc

40、urate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regio

41、nal publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in

42、some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agent

43、s including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, o

44、r reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of

45、 the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-24 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This sec

46、ond edition cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Revision of the structure in accordance with ISO/IEC Directives, Part 2:2011 (sixth ed

47、ition) to the extent practicable, and harmonization between other similar kinds of documents. b) In addition, Clause 4 and all the tables have been reviewed in order to prevent duplications and contradictions. BS EN 60384-24:2015 6 IEC 60384-24:2015 IEC 2015 The text of this standard is based on the

48、 following documents: FDIS Report on voting 40/2382/FDIS 40/2395/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The list of al

49、l parts of the IEC 60384 series, under the general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60384-24:2015I