EN 50174-1-2009 en Information technology - Cabling installation - Part 1 Installation specification and quality assurance (Incorporates Amendment A2 2014)《信息技术 电缆安装 第1部分 安装规范和质量保证.pdf

《EN 50174-1-2009 en Information technology - Cabling installation - Part 1 Installation specification and quality assurance (Incorporates Amendment A2 2014)《信息技术 电缆安装 第1部分 安装规范和质量保证.pdf》由会员分享，可在线阅读，更多相关《EN 50174-1-2009 en Information technology - Cabling installation - Part 1 Installation specification and quality assurance (Incorporates Amendment A2 2014)《信息技术 电缆安装 第1部分 安装规范和质量保证.pdf（62页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 50174-1:2009+A1:2011Incorporating corrigendum February 2015Information technology Cabling installation Part 1: Installation specification and quality assuranceBS EN 50174-1:2009+A2:2014BS EN 50174-1:2009+A2:2014 BRITISH STANDARDNational forewordThis British Standard is

2、 the UK implementation of EN 50174-1:2009+A2:2014. It supersedes BS EN 50174-1:2009+A1:2011 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CENELEC text carry the number of the CENELEC amendment. For exam

3、ple, text altered by CENELEC amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee TCT/7, Telecommunications - Installation requirements.A list of organizations represented on this committee can be obtained on request to its secretary.This publica

4、tion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 86398 1ICS 33.040.50; 35.110Compliance with a British Standard cannot confer i

5、mmunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2009.Amendments/corrigenda issued since publicationDate Text affectedImplementation of CENELEC amendment A1:201130 June 2011 31 March 2015 Implementation o

6、f CENELEC amendment A2:2014, and in addition, subclause 4.3.3.1 correctedEUROPEAN STANDARD EN 50174-1NORME EUROPENNEEUROPISCHE NORM Ma 2011CENELEC European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCen

7、tral Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50174-1:2009 EICS 35.110 Supersedes EN 50174-1:2000English versionInformation technology - Cabling installation - Part 1: I

8、nstallation specification and quality assuranceTechnologies de linformation -Installation de cblages -Partie 1: Spcification de linstallationet assurance de la qualit Informationstechnik -Installation vonKommunikationsverkabelung -Teil 1: Installationsspezifikationund QualittssicherungThis European

9、Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to complywith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standardthe status of a national standard without any alteration. Up-to-date lists and bibliographical references conce

10、rning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into it

11、s own language and notifiedto the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

12、ly, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,Sweden, Switzerland and the United Kingdom.rch :2009+A1EN 50174-1:2009+A2October 2014Foreword This European Standard was prepared by the Technical Committee CENELEC TC 215, Electrot

13、echnical aspects of telecommunication equipment. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50174-1 on 2009-05-01. This European Standard supersedes EN 50174-1:2000. The following dates were fixed: latest date by which the EN has to be implemented at nat

14、ional level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-05-01 EN 50174 comprises three parts. All three parts support the specification, implementation and oper

15、ation of information technology cabling. There are specific requirements for cabling systems that are in accordance with the design requirements of the EN 50173 series. However, the three parts also apply to cabling systems of any design including those in accordance with standards such as EN 50098-

16、1 or EN 50098-2. This part, EN 50174-1, is concerned with specification, quality assurance, documentation and administration of information technology cabling to be installed, together with its subsequent operation and maintenance. It sets out the responsibilities of information technology cabling i

17、nstallers and premises owners or appointed representatives separately, and is intended to be referenced in relevant contracts. It does not cover those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems

18、 (e.g. wireless, radio, microwave or satellite). _ BS EN 50174-1:2009+A1:2011EN 50174-1:2009+A1:2011 (E) 2 BS EN 50174-1:2009+A2:2014EN 50174-1:2009+A2:2014 (E) 2 Foreword This European Standard was prepared by the Technical Committee CENELEC TC 215, Electrotechnical aspects of telecommunication equ

19、ipment. The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50174-1 on 2009-05-01. This European Standard supersedes EN 50174-1:2000. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identica

20、l national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-05-01 EN 50174 comprises three parts. All three parts support the specification, implementation and operation of information technology cabling.

21、There are specific requirements for cabling systems that are in accordance with the design requirements of the EN 50173 series. However, the three parts also apply to cabling systems of any design including those in accordance with standards such as EN 50098-1 or EN 50098-2. This part, EN 50174-1, i

22、s concerned with specification, quality assurance, documentation and administration of information technology cabling to be installed, together with its subsequent operation and maintenance. It sets out the responsibilities of information technology cabling installers and premises owners or appointe

23、d representatives separately, and is intended to be referenced in relevant contracts. It does not cover those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or sate

24、llite). _ BS EN 50174-1:2009+A1:2011EN 50174-1:2009+A1:2011 (E) 2 This amendment comes with a new normative Annex E on sampling plans and marginal results; simplified administration requirements (see 4.5.2), simplified complexity installation and operational levels (see 6.2) and simplified minimum r

25、equirements for technical specifications and quality plans (see Annex A); some technical and editorial changes to Clauses 4 and 5. Foreword to amendment A1 This amendment to the European Standard EN 50174-1:2009 was prepared by the Technical Committee CENELEC TC 215, Electrotechnical aspects of tele

26、communication equipment. The text of the draft was submitted to the formal vote and was approved by CENELEC as Amendment A1 to EN 50174-1:2009 on 2011-01-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall no

27、t be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-01-01 latest date by which the national standa

28、rds conflicting with the amendment have to be withdrawn (dow) 2014-01-01 BS EN 50174-1:2009+A1:2011EN 50174-1:2009+A1:2011 (E) 3 BS EN 50174-1:2009+A2:2014EN 50174-1:2009+A2:2014 (E) 3 EN 50174-1:2009/A2:2014 2 Foreword This document (EN 50174-1:2009/A2:2014) has been prepared by CLC/TC 215 “Electro

29、technical aspects of telecommunication equipment“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-08-18 latest date by which the national standards conflicting wit

30、h this document have to be withdrawn (dow) 2017-08-18 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This Amendment covers some techn

31、ical and editorial changes to the Introduction, Clauses 3 and 4. a new Annex F. Foreword to amendment A2BS EN 50174-1:2009+A2:2014EN 50174-1:2009+A2:2014 (E) 4 ContentsIntroduction 61 Scope and conformance 91.1 Scope.91.2 Conformance 92 Normative references 93 Terms, definitions and abbreviations 10

32、3.1 Terms and definitions 103.2 Abbreviations .144 Requirements for specifying installations of information technology cabling 144.1 Documentation .144.2 Planning .204.3 Products and processes .244.4 External network service provision 264.5 Operating procedures .274.6 Maintenance .305 Requirements f

33、or installers of information technology cabling 315.1 Documentation and administration 315.2 Products and processes .335.3 Power supplies .335.4 Surveys 346 Installation complexity 346.1 Requirements .346.2 Recommendations 34Annex A (normative) Minimum requirements for technical specifications and q

34、uality plans 36A.1 General 36A.2 Technical specification 36A.3 Quality plan 36Annex B (normative) Polarity maintenance: Connecting hardware for multiple optical fibres 37B.1 General 37B.2 Duplex connecting hardware interfaces .37B.3 Array connecting hardware interfaces .41Annex C (informative) Termi

35、nating balanced cables on terminating blocks in distributors 46C.1 General 46C.2 The use of the same type of connector at each end of a cable.46C.3 The use of a different type of connector at each end of a cable .46C.4 Relation between the pins of connectors according to EN 60603-7 and the tags of a

36、 terminating block 46Annex D (informative) Compatibility between transmission systems (balanced and unbalanced)sharing the same cable sheath within information technology cabling 47D.1 Introduction 47D.2 Recommendations concerning cable sharing .47D.3 Factors to be taken into account to ensure satis

37、factory performance .48D.4 Guidelines for reducing interference between transmission systems within the same cable sheath .49BS EN 50174-1:2009+A2:2014EN 50174-1:2009+A2:2014 (E) 5 D.5 Cabling qualification .49D.6 Particular installation requirements and recommendations 49D.7 Cable management 50D.8

38、Regulatory aspects .50Annex E (normative) Sampling plans and marginal results 51E.1 Sampling plans .51E.2 Marginal results 54E.3 Non-compliant results .55Annex F (normative) Automated Infrastructure Management (AIM) systems 56F.1 Introduction 56F.2 Specifying AIM systems 56F.3 Functions .56F.4 Opera

39、tional requirements .57F.5 Usage recommendations 57Bibliography 58Figures Figure 1 Schematic relationship between the EN 50174 series and other relevant standards 7Figure B.1 Duplex connecting hardware plug .38Figure B.2 Duplex connecting adapter .38Figure B.3 Duplex patch cord 38Figure B.4 Views of

40、 crossover patch cords 39Figure B.5 Optical fibre sequences and adapter orientation in patch panel for the Symmetrical Position Method .40Figure B.6 Optical fibre sequences and adapter orientation in patch panel for the Reverse-Pair Position Method .40Figure B.7 Array connector cable or patch cord (

41、key-up to key-up) .42Figure B.8 Array adapter with aligned keyways 42Figure B.9 Transition assembly .43Figure B.10 Connectivity method for duplex cabling .44Figure B.11 Connectivity method for array cabling .45Figure E.1 Schematic of test result boundaries 54TablesTable 1 Contextual relationship bet

42、ween EN 50174 series and other standards relevant for information technology cabling systems .8Table 2 Minimum requirements of administration systems 28Table 3 Minimum requirements of operational administration systems 29Table 4 Level of installation complexity 35Table 5 Level of operational complex

43、ity .35Table A.1 Minimum requirements for technical specification .36Table A.2 Minimum requirements for quality plan .36Table B.1 Optical fibre colour code scheme of EN 60794-2 37Table C.1 Examples of the relations between the EN 60603-7 series pins and the tags of the terminating block .46Table E.1

44、 Installed balanced cabling test parameters .51Table E.2 Installed optical fibre cabling test parameters .53Introduction The importance of services delivered by information technology cabling infrastructure is similar to that of utilities such as heating, lighting and electricity supplies. As with t

45、hose utilities, interruptions to service can have a serious impact. Poor quality of service due to lack of planning, use of inappropriate components, incorrect installation, poor administration or inadequate support can threaten an organisations effectiveness. There are four phases in the successful implementation of information technology cabling. These are: a) design; b) specification the detailed requirement for the cabling, including the planning of its accommodation and associated building services addressing specific environments (e.g. electromagnetic) together with the quality assura