EN 15824-2009 en Specifications for external renders and internal plasters based on organic binders《基于有机粘结剂的外部粉刷和内部石膏规范》.pdf

《EN 15824-2009 en Specifications for external renders and internal plasters based on organic binders《基于有机粘结剂的外部粉刷和内部石膏规范》.pdf》由会员分享，可在线阅读，更多相关《EN 15824-2009 en Specifications for external renders and internal plasters based on organic binders《基于有机粘结剂的外部粉刷和内部石膏规范》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 15824:2009ICS 91.100.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSpecifications forexternal renders andinternal plasters basedon organic bindersThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 O

2、ctober2009 BSI 2009ISBN 978 0 580 62677 7Amendments/corrigenda issued since publicationDate CommentsBS EN 15824:2009National forewordThis British Standard is the UK implementation of EN 15824:2009.The UK participation in its preparation was entrusted to TechnicalCommittee B/519/2, Mortar.A list of o

3、rganizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligati

4、ons.BS EN 15824:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15824July 2009ICS 91.100.10English VersionSpecifications for external renders and internal plasters basedon organic bindersSpcifications pour enduits de maonnerie organiquesextrieurs et intrieursFestlegungen fr Auen- und Innenputz

5、e mit organischenBindemittelnThis European Standard was approved by CEN on 11 December 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date l

6、ists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the resp

7、onsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Icel

8、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marn

9、ix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15824:2009: EBS EN 15824:2009EN 15824:2009 (E) 2 Contents Page Foreword 3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Req

10、uirements .6 4.1 General 6 4.3 Water absorption .7 4.4 Adhesion .7 4.5 Durability 7 4.6 Thermal conductivity .7 4.7 Reaction to fire .7 4.8 Summary of specifications .8 5 Description and designation 8 5.1 Description .8 5.2 Designation 8 6 Marking and labelling 9 7 Evaluation of conformity .9 7.1 Ge

11、neral 9 7.2 Initial Type Tests (ITT) .9 7.3 Factory Production Control (FPC) 10 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 12 ZA.1 Scope and relevant characteristics 12 ZA.2 Procedure for the attestation of conformit

12、y for renders and plasters 13 ZA.2.1 Systems of attestation of conformity . 13 ZA.2.2 EC Certificate and Declaration of conformity 16 ZA.3 CE marking and labelling accompanying the product 18 Bibliography . 21 BS EN 15824:2009EN 15824:2009 (E) 3 Foreword This document (EN 15824:2009) has been prepar

13、ed by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be w

14、ithdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandat

15、e given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document. The CEN Enquiry on this Work Item was submitted as p

16、rEN 998-3:2006 but as a result of the discussion of the comments, the title of the draft was changed. As a result of this change the identifier of the Final Draft is changed too. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bo

17、und to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

18、Switzerland and the United Kingdom. BS EN 15824:2009EN 15824:2009 (E) 4 Introduction The properties of external renders and internal plasters based on organic binders are primarily determined by the type or types of binders used and their respective proportions. Organic renders and plasters can be d

19、efined according to the: chemical and physical nature of the main active binder(s) and its state of dissolution, dispersion, or powder, which is decisive for the final characteristics of the surface covering with one or several coats; finishes determined by the aggregate distribution and application

20、 technique; properties and/or type of use. They are factory-made products produced in paste form, ready to use or in powder form. Renders and plasters do not attain their final characteristics until properly dried and hardened after application. The functions performed by renders and plasters depend

21、 on the properties of the type of raw materials used, on the thickness of the coats and the type of application. In addition, renders and plasters determine the final surface of the construction before eventually receiving a finish if required. The manufacturer designates the appropriate properties

22、and characteristics for end use and appearance and should give information about the use of the renders or plasters and the relevant conditions of use. BS EN 15824:2009EN 15824:2009 (E) 5 1 Scope This European Standard is applicable to factory-made renders and plasters based on organic binders used

23、for external or internal covering on walls, columns, partitions and ceilings. This European Standard is also applicable to renders and plasters with inorganic binders such as silicates, silanes, siloxanes and silicones. This European Standard contains definitions and final performance requirements.

24、It includes relevant characteristic categories to designate renders and plasters. This European Standard is not applicable to coating materials and coating systems according to EN 1062-1 and EN 13300. This European Standard does not contain recommendations for the design and application of renders a

25、nd plasters. However, this European Standard may be used for definition of renders and plasters in conjunction with codes of application and national specifications for execution of works. 2 Normative references The following referenced documents are indispensable for the application of this documen

26、t. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1015-2, Methods of test for mortar for masonry Part 2: Bulk sampling of mortars and preparation of test mortars EN 1062-3, Paints and

27、varnishes Coating materials and coating systems for exterior masonry and concrete Part 3: Determination of liquid water permeability EN 1542, Products and systems for the protection and repair of concrete structures Test methods Measurement of bond strength by pull-off EN 1745:2002, Masonry and maso

28、nry products Methods for determining design thermal values EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13687-3, Products and systems for the protection and repair of concrete structures Test methods D

29、etermination of thermal compatibility Part 3: Thermal cycling without de-icing salt impact EN 13820, Thermal insulating materials for building applications - Determination of organic content EN ISO 7783-2, Paints and varnishes Coating materials and coating systems for exterior masonry and concrete P

30、art 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999) EN ISO 9001, Quality management systems Requirements (ISO 9001:2000) EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes Sampling (ISO 15528:2000) 3 Terms and definitions

31、 For the purposes of this document, the following terms and definitions apply. BS EN 15824:2009EN 15824:2009 (E) 6 3.1 render and plaster product in paste or powder form, consisting of a mix of one or more organic binders, aggregates, additives/additions, with water or solvent used for external rend

32、ering or internal plastering NOTE Render or plaster may be the product delivered by the manufacturer or the applied material on site. 3.2 declared value value that a manufacturer is confident in achieving, bearing in mind the precision of test and variability of a process 3.3 substrate surface to wh

33、ich the plaster or render is applied or is to be applied NOTE Examples are coated or uncoated masonry, concrete, gypsum elements, gypsum or cementitious boards for walls, columns, partitions and ceilings. 4 Requirements 4.1 General The requirements on characteristics for dried and hardened renders a

34、nd plasters shall be defined using the test methods and procedures referred to in this European Standard. For these tests, renders and plasters in paste form shall be sampled in accordance with EN ISO 15528 and renders and plasters in powder form in accordance with EN 1015-2. NOTE The characteristic

35、 values are specified under laboratory conditions and cannot always be directly compared with the characteristics obtained under site conditions. In all tests the layer thickness recommended in the manufacturers instructions shall be used. 4.2 Water vapour permeability Water vapour permeability shal

36、l be determined for external renders by measuring the water vapour transmission rate in accordance with EN ISO 7783-2 and shall be categorized in accordance with the values given in Table 1. Table 1 Categories for water vapour transmission rate (V) Category Requirement Water vapour transmission rate

37、 V g/(m d) Diffusion equivalent to the air layer thickness sd m aV1High 150 15 0,14 0,5 W2Medium 0,5 0,1 W3Low 0,1 4.4 Adhesion Adhesion of the system shall be declared and shall be determined in accordance with EN 1542 after drying, hardening and conditioning for 28 days at (23 2) C and (50 10) % r

38、elative humidity. All measured values shall be not less than 0,3 MPa. 4.5 Durability The durability against freeze-thaw for external renders shall be declared. It shall only be assessed according to EN 13687-3 if the liquid water permeability of a render is w 0,5 kg/(m d0,5). All measured values sha

39、ll be not less than 0,3 MPa. 4.6 Thermal conductivity The thermal conductivity shall be declared on the basis of Table A.12 in EN 1745:2002 for renders and plasters intended to be used in elements subject to thermal requirements. Tabulated values depending on the density are given in Table A.12 of E

40、N 1745:2002 4.7 Reaction to fire Renders and plasters containing a mass or volume fraction determined according to EN 13820 of 1,0 % of homogeneously distributed organic materials are classified as reaction to fire Class A1 without the need to test. NOTE 1 See Commission Decision 96/603/EC for class

41、ification A1 as amended by the Commission Decision 2003/424/EC of 6 June 2003. Renders and plasters containing a mass fraction determined according to EN 13820 of 1,0 % of homogeneously distributed organic materials shall be tested, using the test method(s) relevant for the corresponding reaction to

42、 fire class, in order to be classified according to EN 13501-1. NOTE 2 Otherwise as demonstrated by the test method, experience has shown that renders and plasters applied in quantities 0,5 kg/(m d0,5) EN 13687-3 0,3 MPa 4.6 Thermal conductivity (for use in elements subject to thermal requirements)

43、EN 1745 Declared value 4.7 Reaction to fire (for renders and plasters) EN 13501-1 Euroclass A.1 to F 5 Description and designation 5.1 Description The state of the render or plaster shall be described as one of the following: 1) Water-dilutable: product dissolved or dispersed in water. Viscosity adj

44、ustment is performed with water; 2) Solvent-dilutable: product dissolved or dispersed in organic solvents. Viscosity adjustment is performed with organic solvents; 3) Powder form: product to be mixed with water in order to achieve a paste consistency. 5.2 Designation Designation of the render or pla

45、ster shall be given by: 1) brand name; 2) intended use for exterior and/or interior; 3) product type according to 5.1; 4) characteristics and categories according to clause 4; 5) name and address of the manufacturer; 6) date or code of production; 7) number and date of issue of this European Standar

46、d (EN 15824:2009); 8) instructions for use and field of application, e.g.: BS EN 15824:2009EN 15824:2009 (E) 9 a) mixing procedure; b) mode of application; c) number of coats; d) information about coverage. NOTE Information about special properties can be included when it is intended to use the rend

47、er or plaster in specific conditions. 6 Marking and labelling The designation (see 5.2) and abbreviation identifying the product shall be marked on the packaging, delivery ticket and/or the manufacturers data sheet or other information accompanying the product. NOTE For CE marking and labelling, cla

48、use ZA.3 applies. When Annex ZA.3 requires the CE marking to be accompanied by specific information from the list here above, relevant requirements can be considered to have been met. 7 Evaluation of conformity 7.1 General Conformity assessment is needed to demonstrate, by Initial Type Testing ITT (

49、see 7.2), that the product complies with the requirements of this European Standard and that the performance declarations represent the true behaviour of the product and by Factory Production Control FPC (see 7.3) , that the performance declarations based on initial type testing results remain valid for subsequent products. The manufacturer or his agent shall demonstrate the compliance for his product with the requirements of this European standard by carrying out both ITT and FPC and is responsible for the product