EN 792-8-2001 en Hand-held non-electric power tools - Safety requirements - Part 8 Sanders and polishers (Incorporates Amendment A1 2008)《手持非电动工具 安全要求 第8部分 砂轮机和抛光机 包含修改件A1-2008》.pdf

《EN 792-8-2001 en Hand-held non-electric power tools - Safety requirements - Part 8 Sanders and polishers (Incorporates Amendment A1 2008)《手持非电动工具 安全要求 第8部分 砂轮机和抛光机 包含修改件A1-2008》.pdf》由会员分享，可在线阅读，更多相关《EN 792-8-2001 en Hand-held non-electric power tools - Safety requirements - Part 8 Sanders and polishers (Incorporates Amendment A1 2008)《手持非电动工具 安全要求 第8部分 砂轮机和抛光机 包含修改件A1-2008》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 792-8:2001+A1:2008 Incorporating corrigendum February 2007 Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishersICS 25.140.10; 25.140.99BS EN 792-8:2001+A1:2008This British Standard waspublished under the authorityof the Standards Committee and co

2、mes into effect on 15 March 2001 BSI 2009 ISBN 978 0 580 61937 3National forewordThis British Standard is the UK implementation of EN 792-8:2001+A1:2008. It supersedes BS EN 792-8:2001, which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee MCE/8, Compressor

3、s, pneumatic tools, pneumatic machines and vacuum technology, to Panel MCE/8/-/2, Hand-held, non electric powertools Safety. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

4、a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity fromlegal obligations. Amendments/corrigenda issued since publication Amd. No. Date Comments16911 Corrigendum No. 1Revision of supersession details28 February 20070 April 2009 Imp

5、lementation of CEN amendment A1:2008The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by . 3EUROPEAN STANDARD NORME EU

6、ROPENNE EUROPISCHE NORM EN 792-8:2001+A1 September 2008 ICS 25.140.10; 25.140.99 Supersedes EN 792-8:2001English Version Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers Machines portatives moteur non lectrique - Prescriptions de scurit - Partie 8: Polisseuses

7、-lustreuses et ponceusesHandgehaltene nicht-elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 8: Schleifmaschinen fr Schleifbltter und Polierer This European Standard was approved by CEN on 16 November 2000 and includes Amendment 1 approved by CEN on 26 July 2008. CEN members are bou

8、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C

9、EN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same sta

10、tus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani

11、a, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved

12、worldwide for CEN national Members. Ref. No. EN 792-8:2001+A1:2008: EEN 792-8:2001+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 3.1 General terms and definitions6 3.2 Terms and definitions related to polishers and sanders.7 4 Lis

13、t of hazards8 5 Safety requirements and measures.9 5.1 Mechanical safety 9 5.2 Thermal safety9 5.3 Noise .10 5.4 Vibration .10 5.5 Materials and substances processed, used or exhausted10 5.6 Ergonomics 11 5.7 Safety related measures and means11 6 Information for use 12 6.1 Marking, signs and written

14、 warnings.12 6.2 Instruction for use .12 7 Verification .14 7.1 Noise .14 7.2 Vibration .14 7.3 Unintentional start .15 7.4 Structure of verification 15 Annex A (informative) Examples of sanders and polishers covered by this part of EN 792.16 Annex B (informative) Symbols for labels and signs 17 Ann

15、ex C (informative) Examples of abrasive products for polishers and sanders .18 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“.19 Annex ZB (informative) !Relationship between this European Standard and the Essential Require

16、ments of EU Directive 2006/42/EC“.20 Bibliography 21 EN 792-8:2001+A1:2008 (E) 3 Foreword This document (EN 792-8:2001+A1:2008) has been prepared by Technical Committee CEN/TC 255 “Hand-held, non-electric power tools Safety“, the secretariat of which is held by SIS. This European Standard shall be g

17、iven the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This European Standard has been prepared under a mandate given to CEN by the Europe

18、an Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ This document includes Amendment 1, approved by CEN on 2008-07-26. Thi

19、s document supersedes EN 792-8:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. The “European Committee of Manufacturers of Compressors, Vacuum Pumps and Pneumatic Tools“, PNEUROP, has given substantial contributions to this standard. The st

20、andard has been created in close co-operation with CENELEC/TC 61F with the aim of achieving requirements for mechanical safety in the EN 50 144 series, which are similar for hand-held electric and non-electric power tools. NOTE Other technical committees in CEN dealing with hand-held power tools hav

21、e been asked to follow the safety requirements as in EN 792. The annexes to this part of the standard are: Annex A (informative) Examples of power tools covered by this part Annex B (informative) Labels, signs and tags Annex C (informative) Examples of abrasive products for polishers and sanders !An

22、nexes ZA and ZB“ (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives. This Standard also contains a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are

23、bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

24、, Switzerland and United Kingdom. EN 792-8:2001+A1:2008 (E) 4 Introduction This European standard is a type C standard as stated in EN 1070:1998. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this standard. When pro

25、visions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of other standards, for machines that have been designed and built according to the provisions of this type C standard. EN 79

26、2 consists of a number of independent parts for individual types of hand-held non-electric power tools. Other European standards deal with safety rules for hand-held power tools used in e.g. the following fields: agriculture and forestry such as chain saws, hedge-trimmers, brush cutters, grass trimm

27、ers; construction and building such as cutting-off power tools, concrete vibrators; food industry, such as fowl secateurs, sheep shears. Endeavours have been made to achieve co-ordination with the relevant Technical Committees so that the safety requirements are compatible. This standard is divided

28、in the following parts: Part 1: Assembly power tools for non-threaded mechanical fasteners (former part 14) Part 2: Cutting-off and crimping power tools (former part 15) Part 3: Drills and tappers Part 4: Non rotary percussive power tools Part 5: Rotary, percussive power drills Part 6: Assembly powe

29、r tools for threaded fasteners Part 7: Grinders Part 8: Sanders and polishers Part 9: Die grinders Part 10: Compression power tools Part 11: Nibblers and shears Part 12: Small circular, small oscillating and reciprocating saws Part 13: Fastener driving tools Certain parts of EN 792 cover hand-held n

30、on-electric power tools, driven by internal combustion engines powered by gaseous or liquid fuel. In these parts, the safety aspects relating to internal combustion engines are found in a normative annex. The parts are type C standards and refer to pertinent European Standards of type A and B where

31、such standards are applicable. EN 792-8:2001+A1:2008 (E) 5 1 Scope EN 792 applies to hand-held non-electric power tools driven by rotary or linear motors, powered by compressed air or hydraulic fluid and intended to be used by one operator and supported by: the operators hand or hands, a suspension,

32、 e.g. a balancer. This part of EN 792 applies to hand-held non electric power tools intended for polishing and sanding with all types of movement e.g. rotary, orbital and reciprocating, using coated abrasive products and bonnets of various soft materials and endless belts. This part lists the signif

33、icant hazards caused by such power tools and specifies safety requirements valid for different aspects of safety during their foreseeable lifetime. Power tools covered by this part of the standard: belt sanders, orbital sanders, polishers, random orbital sanders, rotary sanders, straight line sander

34、s. Special requirements and modifications on a hand-held power tool for the purpose of mounting it in a fixture are not covered by this part. NOTE At the date of publication no sanders and polishers driven by internal combustion engines are known. 2 Normative references This European Standard incorp

35、orates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Europ

36、ean Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 292-1:1991, Safety of machinery - Basic concepts, general principles for design Part 1: Basic terminology, methodology EN 29

37、2-2:1991, Safety of machinery - Basic concepts, general principles for design Part 2: Technical principles and specifications EN 563, Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces EN 614-1, Safety of machinery - Ergo

38、nomic design principles Part 1: Terminology and general principles EN 1070:1998, Safety of machinery - Terminology EN 792-8:2001+A1:2008 (E) 6 EN 1127-1, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology EN 12096, Mechanical vibration - Declaration and

39、verification of vibration emission values EN ISO 4871, Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN 28662-1, Hand-held portable power tools - Measurement of vibrations at the handle Part 1: General (ISO 8662-1:1988) EN ISO 8662-8, Ha

40、nd-held portable power tools - Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) EN ISO 14163, Acoustics Guidelines for noise control by silencers (ISO 14163:1998) !EN ISO 15744:2008, Hand-held non-electric power tools Noise me

41、asurement code Engineering method (grade 2) (ISO 15744:2002)“ ISO 3857-3:1989, Compressors, Pneumatic tools and machines - Vocabulary Part 3: Pneumatic tools and machines. ISO 5391:1988, Pneumatic tools and machines - Vocabulary 3 Terms and definitions For the purposes of this part of the standard,

42、the following terms and definitions apply. 3.1 General terms and definitions 3.1.1 hand-held power tool machine driven by rotary or linear motors powered by compressed air, hydraulic fluid, gaseous or liquid fuel, electricity or stored energy (e.g. by a spring) to do mechanical work and so designed

43、that the motor and the mechanism form an assembly that can easily be brought to its place of operation. The hand-held power tool is operated by one or two hands NOTE Hand-held power tools driven by compressed air or gas are called pneumatic tools. Hand-held power tools driven by hydraulic liquid are

44、 called hydraulic tools. 3.1.2 rotary power tool hand-held power tool the machine spindle of which rotates 3.1.3 inserted tool tool inserted in the hand-held power tool to perform the intended work 3.1.4 service tool tool intended for performing maintenance or service on the hand-held power tool 3.1

45、.5 control device device to start and stop the hand-held power tool or to change the direction of the rotation or to control the functional characteristics such as speed and power EN 792-8:2001+A1:2008 (E) 7 3.1.6 rated speed, r/min maximum rotational speed of the machine spindle, in revolutions per

46、 minute under operating conditions with the inserted tool mounted and at the upper limit of the energy supply, e.g. pressure or flow, as specified by the manufacturer 3.1.7 maximum operating pressure maximum pressure that a hand-held power tool may be operated at, as specified by the manufacturer 3.

47、2 Terms and definitions related to polishers and sanders 3.2.1 sander power tool with rotary, orbital, random orbital or reciprocating motion for sanding, equipped with a flexible pad fitted with a coated abrasive product, such as fibre disc or abrasive paper 3.2.2 belt sander sander driving an endl

48、ess belt, coated with abrasive material 3.2.3 orbital sander sander driving a rectangular pad in a circular or orbital motion 3.2.4 random orbital sander sander driving a rotating round pad in a combined reciprocating and rotational motion 3.2.5 rotary sander sander driving a circular flexible pad i

49、n a simple rotating motion 3.2.6 straight line sander sander driving a rectangular pad in an alternating motion (also called a reciprocating sander) 3.2.7 polisher power tool, fitted with a flexible pad and various soft materials or felt pad for polishing surfaces NOTE Polisher is often a modified sander. For other terms, see EN 1070:1998 and also ISO 3857-3:1989 and ISO 5391:1988. For examples of power tools see annex A. EN 792-8:2001+A1:2008 (E) 8 4 List of hazards The following hazards can occur in the use of sanders and p