EN 635-2-1995 en Plywood - Classification by Surface Appearance - Part 2 Hardwood《胶合板 按表观分类 第2部分 硬木》.pdf

《EN 635-2-1995 en Plywood - Classification by Surface Appearance - Part 2 Hardwood《胶合板 按表观分类 第2部分 硬木》.pdf》由会员分享，可在线阅读，更多相关《EN 635-2-1995 en Plywood - Classification by Surface Appearance - Part 2 Hardwood《胶合板 按表观分类 第2部分 硬木》.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、A CEN wENtb35-2 95 3404589 0131673 138 BRITISH STANDARD Classification by surface appearance Part 2. Hardwood The European Standard EN 6352 : 1995 has the status of a British Standard ICs 79.060.10 NO COPYLNG WITBOUT BSI PERMISSION EXCEPT AS PEWED BY COPYEIGHT LAW BS EN 635-2 : 1995 Incorpomting Ame

2、ndment No. I A AmdNo. 9124 CEN *EN*b35-2 75 = 3404587 0131674 O74 Date June 1996 Indicated by a sideline in the margin s.k$csc - BS EN 635-2 : 1996 Issue 2, June 1996 This British Standard, having been prepared under the direction of the seetor Board for Building and Civil Engineering, was pubiished

3、 under the authority of the Standards bard and comes into effect on 15 December 1995 Q BSI 1995 nie foiiowing BI references reiate to the work on this standard: committee reference B1541 Draft. for comment 981 1481 1 DC ISBN O SW 24769 4 Committees responsible for this British Standard The preparati

4、on of this British Standard was entrusted to Technical Committee B/541, Wood based panels, upon which the foliowing bodies were represented: MA/Engineered Wood Association Association of British Plywood and Veneer Manufacturers British Woodworking Federation Council of the Forest Industries of Briti

5、sh Columbia Department of the Environment (Buiiding Research Establishment) Finnish Plywood International Flat Roofing Conractors Advisory Board Forestry Commission Furniture Industry Research Association institution of Stnictural Engineers Local Authority Organizations Mined Bonded Board products F

6、eddon Nationai Federation of Roofing Contsactois National House-Building Council Nationai Panel products Association Royal Institute of British Architects Structurai Board Association Thber Research and Development Associon nber R-ade Federation Wood Panel Industries Federation 1 Zurich Municipal Bu

7、ilding Guarantee Co-opted members LA Issue 2 2 1 blank original original original original original Issue 1, June 1996 BS EN 635-2 : 1995 Page Issue 4 original 5 original 6 original 7 original 8 original 9 removed 10 removed Inside back cover onginal Back cover Original Summary of pages The foliowin

8、g table identifies the current issue of each page. issue 1 indicates that a page has been introduced for the first time by amendment. Subsequent issue numbers indicate an updated page. Vertical sidelining on replacement pages indicates the most recent changes (amendment, addition, deletion). Page Fr

9、ont cover inside front cover a b 1 Il 1 2 3 O BSI 1996 a Contents page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EX 635-2 3 i BS EN 6352 : 1995 National foreword This British Standard has been prepared by Technical Committee B/541 and is the Enghsh language ve

10、rsion of EN 635-2 : 1995 Plywood - Classification by su-rface appearance - Part 2: Hardwood, published by the European Committee for Standardization (CEN). EN 635-2 was produced as a result of international discussions in which the United Kingdom took an active part. BS EN 63.51, BS EN 635-2 and BS

11、EN 635-3 together supersede BS 6566 : Part 6 : 1985, which will be withdrawn in accordance with CEK provisions within 6 months of completion of the full package of standards covering plywood and related test methods. These standards are: EN 310 EN 313- 1 EN 313-2 EN 3 14- 1 EN 314-2 EN 315 EN 322 EN

12、 323 EN 324- 1 EN 324-2 EN 325 EN 635- 1 EN 635-2 EN 635-3 EN 636- 1 EN 636-2 EN 636-3 EN 1072 EN 1084 The method of classification used in BS EN 635-2 and BS EN 635-3 is similar to that of BS 6566 : Part 6 : 1985. But although the appearance classes in BS EN 635-2 and BS EN 635-3 are identified as

13、E, I, II, III and IV, these classes do not correspond exactly to the appearance classes E, I, II, III and IV of BS 6566 : Part 6. The BS EN 635 standards are thus not technically equivalent to Bs 6566 : Part 6. Cross-reference Publication referred to EN 635-1 1994 Corresponding British Standard BS E

14、N 635 Plywood - Ciassification by surface appearance Part 1 : 1995 General NOTE. EN 635-2 makes informative reference to EN 636-1, EN 636-2 and EN 636-3 which are currently in preparation. Compliance with a British Standard does not of itself confer immunity from legal obligations. il CEN *E#*b35-2

15、615 314045A9 81L3Lb7A ?AT EUROPEAN STANDARD EN 635-2 NORME EUROPENNE EUROPISCHE NORM May 1995 ICs 79.060.10 Descriptors: Wood board, plywood, deciduous timber, classifications, appearance, defects English version Plywood - Classification by surface appearance - Part 2: Hardwood Contreplaqu - Classif

16、ication selon laspect des faces - Partie 2: Bois feuillus Sperrholz - Klassifizierung nach dem Aussehen der Oberflche - Teil 2: Laubholz This European Standard was approved by CEN on 1995-04-14. CEN members are bound to comply with the CENCENELEC Internal Regulations which stipulate the conditions f

17、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretanat or to any CEN member. This European Standard exists in three official

18、 versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national bodies of Austria, Belgum, Denmar

19、k, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-

20、1050 Brussels O 1995 AU rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members Ref. No. EN 635-2 : 1995 E Page 2 EN635-2: 1995 Foreword Contents This European Standard has been prepared by the Rchnical Committee CEN/TC 112, Wood-based p

21、anels, of which the secretariat is held by DIN. Foreword 1 2 This standard is one of a series of standards for the The other Parts of this series are listed in clause 2 and annex A. This European Standard shall be given the status of a national standard, either by publication of an identical text or

22、 bv endorsement. at the latest bv classification of plywood by surface appearance. 3.1 3.2 November 1995, and conflicting national standards shall be withdrawn at the latest by November 1995. Annex A (informative) Bibliography Scope 3 Normative references 3 Classification by surface appearance 3 App

23、earance classes 3 Permissible characteristics and defects 3 7 According to the CENICENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norwa

24、y, Portugal, Spain, Sweden, Switzerland and United Kingdom. Page 3 EN 6352 : 1995 1 Scope This European Standard specifies the nature and limits of characteristics inherent in wood and manufacturing defects enabling the visual assessment of the plywood for allocation to an appearance class. This cla

25、ssification is a contribution to assessing the finishing suitability of plywood. This Part of EN 635 applies to plywood, the surface veneers of which are made from hardwood1) species. It does not apply to overlaid panels. 2 Normative references This European Standard incorporates by dated or undated

26、 reference, provisions from other pubiications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when inc

27、orporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 635- 1 Plywood - Classgication by surface appearance - krt 1: Geneml 3 Classification by surface appearance 3.1 Appearance classes Assessment of characteristics and defects

28、for determination of appearance class shall be carried out in accordance with EN 635-1. Surface classification shall be based on the permissible characteristics and defects within each of the appearance classes as specified in 3.2. NmE. Guidance on selection of finishing for each appearance class is

29、 ven in ENV 635-4. 3.2 Permissible characteristics and defects Each surface shall be individually assigned to one of the appearance classes E, I, II, III, IV, as defined by the permissible characteristics and defects indicated in tables 1 and 2. i) In English, this means conventionally broadleaved s

30、pecies. Page 4 EN6352: 1995 CEN *EN+b35-2 75 34945A9 013U81i 204 W a x Y 3 P E 3 n f c 5 z o Q, E E $ n n E E 3 c C c - c t 1; L 1; I- O tn Y cd O Y Y 5 5 r-4 Y 0 O O G 5, 3 6 w 5 3 - u E - U Y Y E 8 5; z 5 Y l-3 P Y CEN *EN+b35-2 95 m 3404589 0131684 TI3 m Page 7 EN 635-2 : 1995 Annex A (informativ

31、e) Bibliography EN 313-1 EN 313-2 EN 635-1 EN 635-2 ENV 635-4 EN 636-1 EN 636-2 EN 636-3 Plywood - Class-i;fication and terminology - PZLrt 1: Classification Plywood - Classification and terminology - Part 2 : I1Fmzinology Plywood - Classification by surfme appearance - hrt 1 : Ceneml Plywood - Clas

32、svication by surfme appearance - Part 2 : Hardwood Guideline - Plywood - Classification by suflwe appearance Part 4: Parameers of ability for finishing11 Plywood - Specifications - Part 1: Requirements for plywood for use in drg conditions Plywood - Specifications - Part 2: Requirements for plywood

33、for use in humid conditions Plywood Specifications - Part 3: Requirements for plywood for use in exterior conditions At present at the draft stage. A Page 4 5 6 7 8 9 10 Inside back cover Back cover CEN uENtb35-2 95 3404589 OL3Lb5 95T Issue Original Original Original Original Original removed remove

34、d Original Original Issue 1, June 1996 BS EN 635-2 1995 Summary of pages The foilowing table identifies the current issue of each page. hue 1 indicates that a page has been introduced for the fmt time by amendment. Subsequent issue numbers indicate an updated page. Vertical sidelining on replacement

35、 pages indicates the most recent changes (amendment, addition, deletion). Page Front cover inside front cover a b 1 11 1 2 3 Issue 2 2 1 blank Original Original Original Ol-igWI OfilZiIlal O BSI 1996 a - CEN *EN*h35-2 95 W 3404589 OL3Lb8b 89b W BS EN 6352 : 1995 List of references See national forew

36、ord. CEN *EN*b35-2 95 m 3404589 0131687 722 = BS EN 635-2 : 1995 BSI 389 Chiswick High Road London W4 4AL 9512- 6- 0.5k- FP . . BSI - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at

37、the international level. It is incorporated by Royal Charter. Contract requirements A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Revisions British Standards are updated by amendmen

38、t or revision. Users of British Standards should make sure that they possess the latest amendments or editions. Any person who finds an inaccuracy or ambiguity while using this British Standard should bring it to the attention of the Quality Manager, BSI without delay so that the matter may be inves

39、tigated swiftly. BSI offers members an individual updating service calied PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for ali BI, international and foreign standards publications should be addressed to Customer Services, Sales D

40、epartment at Chiswick: Rl: 0181 996 7000; Eax: 0181 996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. information on standards BSI provides a wide range of

41、 information on national, European and international standards through its Library, the Standardline Database, the BI information lkchnology Service (BrrS) and its Technical Help to Exporters Service. Contact the Information Department at Chiswick: l: 0181 996 7111; k: 0181 996 7048. Subscribing mem

42、bers of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Customer Services, Membership at Chiswick: El: 0181 996 7002; M: 0181 996 7001. copyright Copyright subsists in ail BSI pu

43、blications and no part may be reproduced in any form without the prior permission in writing of BSI. This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols and size, type or grade designations including use by incorporation into computer

44、programs, but where these details are reproduced including without limitation in printed form, in computer programs or in any other form whatsoever, the permission in writing of BSI must be obtained and if granted will be on terms including royalty, before the product is sold, licensed or otherwise

45、exploited for commercial gain. Enquiries about copyright should be made to the Copyright Manager at Chiswick. ISBN O 880 24769 4 Wuct code 00601616 BI541 AMD 9124 Amendment No. 1 published and effective from 15 June 1996 to BS EN 635-2 : 1995 Plywood - Classification by surface appearance Part 2. Ha

46、rdwood Instructions for replacement of pages Where ony one of the two pages on each sheet has been updated, the other page has been reprinted. hnt cover and incide front cover a 9 and 10 Replace the pages insert the page immediately after the inside front cover Remove the pages You may wish to retai

47、n the superseded pages, e.g. for reference purposes, if so please mark them Superseded by issue X, where X is the appropriate issue number. if you do not wish to retain the superseded pages, please destroy them. CEN *EN*b35-2 95 m 3404589 Oii3iib89 5T5 BRITISH STANDARD Plywood - Classification by su

48、rface appearance Part 2. Hardwood * * o The European Standard EN 6352 : 1995 has the status of a British Standard ICs 79.060. LO BS EN 635-2 : 1995 Incorporating Amendmt No. I NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PEBMIlTED BY COPYBIGHT LAW CEN *EN*b35-2 95 E 3404589 0131b90 217 E AmdNo. BS EN

49、 635-2 : 1995 Issue 2, June 1996 Date Text affected Committees responsible for this British Standard The following BSI references relate to the work on this standard: Committee reference Wi Draft for comment 92114811 DC ISBN O 580 24769 4 The preparation of this British Standard was entrusted to Technical Committee W541, Wood based panels, upon which the foiiowing bodies were represented MA/Engineered Wood Association Association of British Plywood and Veneer Manufacturers British Woodworking Federation Council of the Forest