EN 4509-2006 en Aerospace series - Screws 100 countersunk normal head offset cruciform recess threaded to head in titanium alloy anodized with aluminium pigmented coating metric se.pdf

《EN 4509-2006 en Aerospace series - Screws 100 countersunk normal head offset cruciform recess threaded to head in titanium alloy anodized with aluminium pigmented coating metric se.pdf》由会员分享，可在线阅读，更多相关《EN 4509-2006 en Aerospace series - Screws 100 countersunk normal head offset cruciform recess threaded to head in titanium alloy anodized with aluminium pigmented coating metric se.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIESBS EN4509:2006Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series Classification: 1 100 MPa (at ambient temperature) / 315 CThe European Standard EN 4509:2006 has

2、 the status of a British StandardICS 49.030.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 4509:2006This British Standard was published und

3、er the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006ISBN 0 580 48522 6National forewordThis British Standard is the official English language version of EN 4509:2006. The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fa

4、steners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in

5、the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible

6、 for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK inte

7、rests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this docume

8、nt indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4509 June 2006 ICS 49.030.20 English Version Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head,

9、 in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 C Srie arospatiale - Vis tte fraise 100 normale, empreinte cruciforme dporte, filetes jusqu proximit de la tte, en alliage de titane, anodises, avec revtement alum

10、ino-organique, srie mtrique - Classification : 1 100 MPa ( temprature ambiante) / 315 C Luft- und Raumfahrt - 100 Senkschrauben, mit Flgelkreuzschlitz, Gewinde annhernd bis Kopf, aus Titanlegierung, anodisiert, mit Aluminium pigmenttete Beschichtung, metrische Reihe - Klasse: 1 100 MPa (bei Raumtemp

11、eratur) / 315 C This European Standard was approved by CEN on 13 January 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

12、liographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

13、of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

14、 Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050

15、 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4509:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Required characteristics.5 4 Designation 8 5 Marking .8 6 Technical specification .8 EN 4509:

16、20063 Foreword This European Standard (EN 4509:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the Nationa

17、l Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national

18、 standards shall be withdrawn at the latest by December 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CEN

19、ELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

20、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4509:20064 1 Scope This standard specifies the characteristics of screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized,

21、 with aluminium pigmented coating, metric series. Classification: 1 100 MPa 1) / 315 C 2)2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition

22、of the referenced document (including any amendments) applies. ISO 3353-1, Aerospace Lead and runout threads Part 1: Rolled external threads. ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. ISO 7913, Aerospace Bolts and screws, metric Tolerances of form and position. IS

23、O 7994:1985, Aerospace Internal drive, offset cruciform recess (Torq-Set ) for rotary fastening devices Metric series. 3)ISO 9152, Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification. EN 2424, Aerospace series Marking of aerospace products. EN 447

24、4, Aerospace series Aluminium pigmented coating Coating methods. 4)EN 9100, Aerospace series Quality management systems Requirements (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) EN 913

25、3, Aerospace series Quality management systems Qualification Procedure for aerospace standard parts. MIL-L-87132B, Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners. 5)TR 3775, Aerospace series Bolts and pins Materials. 6)1) Minimum tensile strength of the material at ambient tempera

26、ture. 2) Maximum temperature that the screw can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is determined by the coating. 3) Withdrawn standard (2003-09-03) 4) Published as AECMA Prestandard at the date of publicat

27、ion of this standard 5) Published by: Department of Defense (DoD), the Pentagon, Washington, D.C.20301, USA. 6) Published as AECMA Technical Report at the date of publication of this standard. EN 4509:20065 3 Required characteristics 3.1 Configuration - Dimensions - Masses See Figure 1 and Table 1.

28、Dimensions and tolerances are expressed in millimetres and apply after coating. Details of form not stated are left to the manufacturers discretion. 3.2 Tolerances of form and position See ISO 7913. 3.3 Materials TR 3775 (titanium alloy, strength class 1 100 MPa) 3.4 Surface treatments See EN 4474.

29、Lubrication with cetylic alcohol (chlorine free) according to MIL-L-87132 EN 4509:2006Valuesin micrometres apply prior to surface treatment. Break sharp edges 0,1 to 0,4. Key1 Conforms to ISO 3353-1 2 Thread 3 Marking 4 Drive: see Table 2. 5 Blended convexform permitted 6 Thread nominal diameter Fig

30、ure 1 3,2 0,83,2 6EN 4509:2006Table 1 ThreadaD1D2D3D4EFGHL0,2b cRMassdDiametercodemax.min. nom.Tol. min. 0 0,08 Code nom. nom.Tol. e f 030 MJ30,5-4h6h6 5,4 4,5 2,3 1,27 0,06 0,63 0,3 006 to 042 6 to 42 0,220,03040 MJ40,7-4h6h8 7,2 5,783 0 0,5 1,69 0,08 0,93 0,4 008 to 056 8 to 56 0,4 0,530,06050 MJ5

31、0,8-4h6h10 9 7,713,4 2,12 0,96 0,5 010 to 070 10 to70 0,5 1,020,09060 MJ61-4h6h 12 10,8 9 4,2 2,54 1,26 012 to 084 12 to84 1,780,13070 MJ71-4h6h 14 12,8 10,285,2 2,96 1,57 012 to 098 12 to98 2,540,17080 MJ81-4h6h 16 14,8 12,216,2 3,39 1,6 014 to 112 14 to112 0,7 3,860,23100 MJ101,25-4h6h 20 18,8 15,

32、437,9 4,23 1,93 018 to 140 18 to140 0,8 0 0,2 7,780,34120 MJ121,25-4h6h 24 22,8 18 9,8 0,5 5,08 0,1 2,53 0,6 020 to 168 20 to168 0,9 0 0,3 12,720,51aIn accordance with ISO 5855-2 bIncrements: 2 for L100 4 for L100 cIf greater lengths arerequired, theyshall bechosen using theabove increments. The len

33、gth codecorresponds tolength L,completed byoneortwozeros to theleft, where necessary, to obtain a three digit code. dApproximate values (kg/1 000 pieces), calculated on the basis of 4,45 kg/dm3, for information purposes only. eValue for first LfIncrease for each additional 2 mm of L.EN 4509:2006EN 4

34、509:2006EN 4509:2006EN 4509:20067 8 4 Designation EXAMPLE Description block SCREW Identity block EN4509050010A Number of this standard Diameter code (see Table 1) Length code (see Table 1) Drive code (see Table 2) NOTE If necessary, the code I9005 shall be placed between the description block and th

35、e identity block. Table 2 Drive Code ISO 7994 R ISO 7994 unribbed A 5 Marking See Table 3 and Figure 1, indented. Table 3 Diameter code EN 2424 Style 030 and 040 N 050 to 120 C + MJ 6 Technical specification ISO 9152, except for clauses: Approval of manufacturers: see EN 9100; Qualification of screw

36、s: see EN 9133. EN 4509:2006blankBS EN 4509:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by

37、 Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an

38、 inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS

39、 which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are a

40、lso available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of informatio

41、n on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44

42、(0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7

43、001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, i

44、n the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise with

45、out prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.