EN 3660-005-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005 Cable outlet style A 90 degrees unsealed w.pdf

《EN 3660-005-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005 Cable outlet style A 90 degrees unsealed w.pdf》由会员分享，可在线阅读，更多相关《EN 3660-005-2009 en Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005 Cable outlet style A 90 degrees unsealed w.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN3660-005:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 005: Cable outlet, style A, 90,unsealed with clamp strain relieffor EN 2997 and E

2、N 4067 ProductstandardThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 63339 3Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-005:2009National forewordThis British Standard is the UK

3、implementation of EN 3660-005:2009. It supersedes BS EN 3660-005:2006 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained o

4、n request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 3660-005:2009EUROPEAN STANDARD NORME EUROPENNE

5、EUROPISCHE NORM EN 3660-005 November 2009 ICS 49.060 Supersedes EN 3660-005:2006English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90, unsealed with clamp strain relief for EN 2997 and EN 4067

6、- Product standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 005 : Raccord coud 90 non tanche type A avec brides serre-cbles pour EN 2997 et EN 4067 - Norme de produitLuft- und Raumfahrt - Endgehuse fr elektrische und optisch

7、e Rund- und Rechtecksteckverbinder - Teil 005: Endgehuse, Bauform A, 90 Ausfhrung, nicht abgedichtet, mit Zugentlastungsklemme fr EN 2997 und EN 4067 - Produktnorm This European Standard was approved by CEN on 20 June 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations wh

8、ich stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European

9、Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the nationa

10、l standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and Uni

11、ted Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-005:20

12、09: EBS EN 3660-005:2009EN 3660-005:2009 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Characteristics .55 Designation . 126 Marking 137 Technical specification 13BS EN 3660-005:2009EN 3660-005:2009 (E) 3 Foreword This document (EN 3660-005:2009) has been

13、 prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member c

14、ountries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attent

15、ion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3660-005:2006. According to the CEN/CENELEC Internal Regulations

16、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands

17、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3660-005:2009EN 3660-005:2009 (E) 4 1 Scope This European Standard defines a range of cable outlets, style A, 90, unsealed with clamp strain relief for use under the following conditions

18、: Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : 65 C to 200 C Class W : 65 C to 175 C Class K : 65 C to 260 C Class A : 65 C to 200 C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references

19、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 2997 (all parts), Aerospace series Connectors, el

20、ectrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak EN 3660-001:2006, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Techn

21、ical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards AS85049A, Connector accessories, electrical general specification for- 1)3 Terms and definitions For the purposes of this docu

22、ment, the terms and definitions given in EN 3660-001:2006 apply. *As well as all parts quoted in this standard. 1) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA. BS EN 3660-005:2009EN 3660-005:2009 (E) 5 4 Characteristics 4.1 Dimens

23、ions and mass For dimensions and mass, see Figure 1 and Table 1. For interface dimensions, see 4.2. Dimensions in millimetres (continued) Figure 1 BS EN 3660-005:2009EN 3660-005:2009 (E) 6 Dimensions in millimetres Detail Z Optional design with four holes for torque wrench, see detail Z. Key 1 Threa

24、d A 2 Teeth N (see Tables 2 and 3) 3 Three off wire lock holes equi-spaced for 0,8 mm max. diameter wire 4 Fillister head screw with wire lock hole 5 Knurled, manufacturers option 6 Marking (see Clause 6) 7 Valley of start tooth to be at vertical centre line of accessory at position shown 8 Four hol

25、es for assembly torque equi-spaced 2,8000,10+(see Figure 1, detail Z) within 3 for shell sizes 08 - 12 within 2 for shell sizes 14 - 18 within 1 for shell sizes 20 and larger. aThe location of holes axis can be left to the manufacturers preference. NOTE 1 The details X and Y are shown in the differe

26、nt variants (see 4.2.2 and 4.2.3). NOTE 2 Coupling nut to be captive on cable outlet body but free to rotate. Figure 2 (concluded) a2 min.8 B1BS EN 3660-005:2009EN 3660-005:2009 (E) 7 Table 1 Shell size A B B1 C D E aK L MbThread Class 2B Wire accomodation 0 1,14 0 1,14 + 0,640 0 1,57 0 0,56 max. 1,

27、57 max. min. inches mm mm mm mm mm mm mm mm 08 0,500-20UNF 15,67 19,47 12,74 13,72 7,75 28,97 18,95 5,2 3,2 10 0,625-24UNEF 18,64 22,47 15,88 13,72 7,75 30,05 20,45 7,3 4,8 12 0,750-20UNEF 21,79 25,47 19,05 13,72 7,75 34,95 22,02 9,8 7,4 14 0,875-20UNEF 24,99 28,67 22,23 13,72 7,75 36,47 23,62 11,3

28、9,0 16 1,000-20UNEF 28,24 31,67 25,40 13,72 7,75 40,26 25,25 15,1 12,8 18 1,063-18UNEF 30,94 34,67 27,00 13,72 7,75 43,10 29,74 16,3 13,2 20 1,188-18UNEF 34,16 37,67 30,18 13,72 7,75 46,29 31,34 17,9 15,0 22 1,313-18UNEF 37,29 40,67 33,35 13,72 7,75 49,45 32,92 19,5 16,3 24 1,438-18UNEF 40,46 44,07

29、36,53 13,72 7,75 52,63 34,49 20,3 18,0 28 1,750-18UNS 50,01 50,97 44,45 17,83 7,75 60,25 39,93 20,7 19,0 Shell size M1bP R Screw size Class 2A T b T1bMass Wire accomodation Classes N, A and W Class K max. min. 0,5 0,5 0,8 0,8 max. g Variant mm mm mm mm inches mm mm 1 2 1 2 08 5,2 3,2 18,6 6,35 6-32U

30、NC 12,7 12,7 11,0 11,9 19,6 27,310 7,3 4,8 20,6 6,35 6-32UNC 12,7 12,7 12,0 14,2 21,2 33,212 10,6 7,4 24,6 6,35 6-32UNC 12,7 15,9 14,0 18,4 23,9 43,814 12,0 9,0 26,1 6,35 6-32UNC 12,7 15,9 18,0 22 27,6 53,116 16,0 12,8 33,0 6,35 6-32UNC 12,7 15,9 20,0 27 35,1 66,118 18,0 13,2 36,4 9,53 8-32UNC 15,9

31、19,1 28,5 41,4 45,0 99,720 21,0 15,0 39,0 9,53 8-32UNC 15,9 22,3 31,0 49,2 51,1 119,122 24,3 16,3 41,5 9,53 8-32UNC 15,9 25,4 35,5 57 55,7 138,424 27,5 18,0 44,6 9,53 8-32UNC 15,9 28,6 39,5 69,4 73,6 170,428 30,0 19,0 50,8 12,70 8-32UNC 19,5 31,8 70,0 114,2 89,8 289,5aE dimension is taken when the c

32、oupling nut is pulled in forward position. bM and T dimensions are for variants A and D; M1and T1dimensions are for variants B and C. M and M1diameters are wire bundle accommodation and are not meant to define the clamp hardware limits. BS EN 3660-005:2009EN 3660-005:2009 (E) 8 4.2 Interface dimensi

33、ons 4.2.1 Associated connection See EN 3660-002. 4.2.2 Variants A and C AS85049 interface See Figure 2, Figure 3 and Table 2. All dimensions are in millimetres. Figure 3 Detail X Figure 4 Detail Y Table 2 Dimensions in millimetres Shell size G H J N 0 0,38 + 0,38 0 0 0,25 Number of teeth 08 9,10 7,5

34、9 6,86 12 10 12,50 11,00 9,53 15 12 15,50 13,94 12,98 21 14 18,70 17,12 14,86 24 16 21,80 20,29 18,03 30 18 23,30 22,07 20,04 33 20 26,40 25,25 23,22 36 22 29,60 28,42 26,39 39 24 32,80 31,60 29,31 42 28 38,40 37,31 35,28 54 BS EN 3660-005:2009EN 3660-005:2009 (E) 9 4.2.3 Variants B and D Modified A

35、S85049 interface See Figure 4, Figure 5 and Table 3. All dimensions are in millimetres. Figure 5 Detail X (Class K only) Figure 6 Detail Y Table 3 Dimensions in millimetres Shell size F G H J N + 0,18 0 Ref. + 0,13 0 0 0,25 Numberof teeth 08 6,68 11,10 9,17 6,86 12 10 9,35 14,53 11,10 9,53 15 12 12,

36、62 17,45 14,83 12,98 21 14 14,86 20,62 17,22 15,98 24 16 17,73 23,80 20,55 18,03 30 18 20,04 25,20 22,48 21,46 33 20 23,22 28,37 25,53 25,02 36 22 26,39 31,55 29,01 27,61 39 24 29,31 34,72 32,46 31,62 42 28 35,28 42,75 38,91 37,97 54 4.3 Material and finish Material/Finish Class N : Aluminium/Electr

37、oless nickel plated Material/Finish Class W : Aluminium/Olive drab cadmium plated Material/Finish Class K : Stainless steel/Passivated Material/Finish Class A : Aluminium/Black anodized BS EN 3660-005:2009EN 3660-005:2009 (E) 10 4.4 Assembly torque These torque values are intended for installation u

38、se only, see Table 4. Table 4 Shell size Torque Nm 0,5 08 4,5 10 12 14 16 18 20 9,0 22 24 28 10,0 4.5 Coupling thread strength torques These torque values are for test purposes, see EN 2591-420 and Table 5. Table 5 Shell size Torque Nm 0,5 08 5,5 10 12 14 16 18 20 11,0 22 24 28 12,0 4.6 Tests Test d

39、etails to be in accordance with Table 6, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. BS EN 3660-005:2009EN 3660-005:2009 (E) 11 Table 6 EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 101 Visual examination X 102 Examination of d

40、imensions and mass X See 4.1. 205 Housing (shell) electrical continuity X Classes W, N and K only 5 m max. 212 Surface transfer impedance (from 100 MHz to 1 GHz) aX 301 Endurance at temperature X Classes N, A and W only 305 Rapid change of temperature X 306 Mould growth X See EN 3660-001. 307 Salt m

41、ist X Cable outlet not fitted to a connector and suspended with non-metallic cord. Duration: Classes N, K and A 48 h Class W 500 h 308 Sand and dust X 314 Immersion at low air pressure X 315 Fluid resistance X 316 Ozone resistance X 317 Flammability X 318 Fire-resistance X Class K only. In accordanc

42、e with EN 2997 Classes K, KE, S and SE, respectively 402 Shock X Method A. Severity: 100 g No. of shocks: One in each direction in three perpendicular axes, i.e. six shocks403 Sinusoidal and random vibration X Method B. Figure 3. Level J Duration: 8 h in each of two axes Test performed: on one group

43、 50 % of time at 65 C 50 % of time at ambient temperature on a 2ndgroup 100 % of time at maximum temperature of class under testcontinued BS EN 3660-005:2009EN 3660-005:2009 (E) 12 Table 6 (concluded) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 406 Mechanical en

44、durance X 408 Mating and unmating forces X Only variant 2, see Table 4. 420 Mechanical strength of rear accessories X Phase A Shell size Bending moment Nm 08 10 12 14 16 18 20 22 24 28 6,0 10,0 20,5 22,5 28,0 31,5 34,0 39,5 43,0 47,5 Phase D and Table 5 422 Locking wire hole strength X 513 Magnetic

45、permeability X Not fitted to a connector. Max. values: Classes N, A and W 2,0 Class K 5,0 a1 GHz to 10 GHz under consideration. 5 Designation EXAMPLE 1 Description block CABLE OUTLET Identity block EN3660-005XXXXX Number of this standard Material/Finish class Shell size Variant - A Standard AS85049

46、interface with M entry and T screw B Modified AS85049 interface with M1entry and T1screw C Standard AS85049 interface with M1entry and T1screw D Modified AS85049 interface with M entry and T screw Variant 1: Nothing nut with three holes for wire lock Variant 2: One nut with four holes for assembly t

47、orque BS EN 3660-005:2009EN 3660-005:2009 (E) 13 EXAMPLE 2 EN3660-005N08B1 Cable outlet, style A, 90, aluminium, electroless nickel, shell size 08, modified AS85049 interface, nut with four holes for assembly torque. NOTE 1 No gaps are required between sections in the part number when printed. NOTE

48、2 If necessary, the code I9005 shall be placed between the description block and the identity block. 6 Marking Refer to EN 3660-001 and Figure 1. 7 Technical specification Refer to EN 3660-001. BS EN3660-005:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax

49、 +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they p