EN 1909-2004 5120 Safety requirements for cableway installations designed to carry persons - Recovery and evacuation《载人用索道装置的安全要求 恢复和撤离》.pdf

《EN 1909-2004 5120 Safety requirements for cableway installations designed to carry persons - Recovery and evacuation《载人用索道装置的安全要求 恢复和撤离》.pdf》由会员分享，可在线阅读，更多相关《EN 1909-2004 5120 Safety requirements for cableway installations designed to carry persons - Recovery and evacuation《载人用索道装置的安全要求 恢复和撤离》.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 1909:2004 Safety requirements for cableway installations designed to carry persons Recovery and evacuation The European Standard EN 1909:2004 has the status of

2、 a British Standard ICS 45.100 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIBS EN 1909:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 October 2004 BSI 27 Octobe

3、r 2004 ISBN 0 580 44690 5 National foreword This British Standard is the official English language version of EN 1909:2004. The UK participation in its preparation was entrusted to Technical Committee MCE/20, Aerial ropeways, which has the responsibility to: A list of organizations represented on th

4、is committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by usin

5、g the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity fr

6、om legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the

7、 UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed

8、Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN1909 October2004 ICS45.100 Englishversion Safetyrequirementsforcablewayinstallationsdesignedtocarry personsRecoveryandevacuation Prescriptions

9、descuritpourlesinstallationscbles transportantdespersonnesRcuprationetvacuation SicherheitsanforderungenfrSeilbahnenfrden PersonenverkehrRumungundBergung ThisEuropeanStandardwasapprovedbyCENon23August2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforg

10、ivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversionin

11、anyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Icela

12、nd,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allri

13、ghtsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN1909:2004:E Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEN 1909:2004 (E) 2 Contents Page Foreword .3 1 Scope5 2 Normative references.5 3

14、 Terms and definitions 6 4 Symbols and abbreviations .7 5 General requirements.7 5.1 Application of this standard.7 5.2 Safety principles.7 5.2.1 General7 5.2.2 Hazard scenarios7 5.2.3 Safety measures.7 6 General requirements for recovery and evacuation .8 7 Requirements for informing the passengers

15、 8 8 Requirements for the recovery of the carriers9 9 Requirements for evacuation of the passengers10 9.1 Provisions common to the various methods10 9.2 Evacuation to the ground.10 9.3 Evacuation along the rope.11 9.4 Other evacuation methods.12 9.5 Equipment for evacuation to the ground 12 9.5.1 Ge

16、neral requirements.12 9.5.2 Requirements specific to equipment for access to the carriers from the ground.12 9.5.3 Requirements specific to equipment for access to carriers from line structures and by the rope.13 9.5.4 Requirements specific to equipment for descent from carriers.13 9.6 Evacuation pl

17、an13 9.6.1 Choice of evacuation methods 13 9.6.2 Content of the evacuation plan14 9.6.3 Use of helicopters 14 10 Training and instruction of the evacuation personal15 Annex ZA (Informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating

18、to cableway installations designed to carry persons .16 Bibliography17 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEN 1909:2004 (E) 3 Foreword This document (EN 1909:2004) has been prepared by Technical Committee CEN/TC 242 “S

19、afety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards

20、shall be withdrawn at the latest by April 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, wh

21、ich is an integral part of this document. This document contains a bibliography. This document forms part of the standards programme approved by the CEN Technical Board on safety requirements for cableway installations designed to carry persons: 1) Safety requirements for cableway installations desi

22、gned to carry persons Terminology. 2) Safety requirements for cableway installations designed to carry persons - General requirements. 3) Safety requirements for cableway installations designed to carry persons Calculations. 4) Safety requirements for cableway installations designed to carry persons

23、 - Ropes. 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices. 6) Safety requirements for cableway installations designed to carry persons Drive systems and other mechanical equipment. 7) Safety requirements for cableway installations designed to carry pe

24、rsons - Carriers. 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems. 9) Safety requirements for cableway installations designed to carry persons - Civil engineering works. 10) Safety requirements for cableway installations

25、 designed to carry persons Pre-commissioning inspection, maintenance and operational inspection and checks. 11) Safety requirements for cableway installations designed to carry persons Recovery and evacuation. 12) Safety requirements for cableway installations designed to carry persons - Operation.

26、13) Safety requirements for cableway installations designed to carry persons - Quality assurance. This series of standards forms a complete set with regard to the design, manufacture, construction, maintenance and operation of all cableway installations for designed to carry persons. According to th

27、e CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Licens

28、ed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEN 1909:2004 (E) 4 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. . Licensed Copy: Wang Bin, ISO/Exchange

29、China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEN 1909:2004 (E) 5 1 Scope This document specifies the safety requirements applicable to carrier recovery and passenger evacuation from cableway installations designed to carry persons, with the exception of ski-tows. Th

30、is standard is applicable to various types of installations and takes into account their environment. This document establishes the requirements relating to the methods and equipment to be used to ensure the safety of passengers on cableways in the event of extended stoppage of the installation. It

31、covers only the situation resulting from immobilization of the carriers, even if the passengers are not in immediate danger. It does not cover specific operations resulting from an accident. It includes requirements relating to the prevention of work accidents and to worker protection. It does not a

32、pply to installations for the transportation of goods by rope or to inclined lifts. It does not deal with construction provisions relating to carriers. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edi

33、tion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1709, Safety requirements for cableway installations designed to carry persons - Pre-commissioning inspection, maintenance and operational inspection and checks. prEN 1907

34、:2004, Safety requirements for passenger transportation by rope - Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons -Tensioning devices. EN 12397, Safety requirements for cableway installations designed to carry persons Operation. EN 12408, Safety require

35、ments for cableway installations designed to carry persons - Quality assurance. EN 12927-1, Safety requirements for cableway installations designed to carry persons - Ropes - Part 1 : Selection criteria for ropes and their end fixings. EN 12927-2, Safety requirements for cableway installations desig

36、ned to carry persons - Ropes - Part 2 : Safety factors. EN 12927-3, Safety requirements for cableway installations designed to carry persons - Ropes - Part 3 : Long splicing of 6 strand hauling, carrying-hauling and towing ropes. EN 12927-4, Safety requirements for cableway installations designed to

37、 carry persons - Ropes - Part 4 : End fixings. EN 12927-5, Safety requirements for cableway installations designed to carry persons - Ropes - Part 5 : Storage, transportation, installation and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons - Ropes -

38、Part 6 : Discard criteria. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEN 1909:2004 (E) 6 EN 12927-7, Safety requirements for cableway installations designed to carry persons - Ropes - Part 7 : Inspection, repair and maintenan

39、ce. EN 12927-8, Safety requirements for cableway installations designed to carry persons - Ropes - Part 8 : Magnetic rope testing (MRT). EN 12929-1, Safety requirements for cableway installations designed to carry persons - General requirements - Part 1 : Requirements applicable to all installations

40、. EN 12929-2, Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes. EN 12930, Safety requirements for cableway installations designed to carry persons - Ca

41、lculations. EN 13107, Safety requirements for cableway installations designed to carry persons - Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway inst

42、allations designed to carry persons - Electrical equipment other than for drive systems. prEN 13796-1, Safety requirements for cableway installations designed to carry persons - Carriers - Part 1 : Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers.

43、prEN 13796-2, Safety requirements for cableway installations designed to carry persons - Carriers - Part 2 : Slipping resistance tests for grips. prEN 13796-3, Safety requirements for cableway installations designed to carry persons - Carriers - Part 3 : Fatigue testing EN 60268-5, Sound system equi

44、pment. Part 5: Loudspeakers. 3 Terms and definitions For the purposes of this document, the terms and definitions given in prEN 1907:2004 and the following apply. 3.1 evacuation plan document containing all the provisions relating to the human and material resources and to the procedures to be imple

45、mented for the evacuation of the passengers 3.2 evacuation drive drive system for an evacuation installation or any other evacuation system 3.3 operations centre position from which the evacuation operations are directed 3.4 control centre position on the installation from which recovery of the carr

46、iers is controlled Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 22 December 2004, Uncontrolled Copy, (c) BSIEN 1909:2004 (E) 7 4 Symbols and abbreviations This document does not include either symbols or abbreviations. 5 General requirements 5.1 Application of this stand

47、ard The requirements of this document apply to all installations together with those of EN 1709, EN 1908, EN 12397, EN 12408, EN 12927-1, EN 12927-2, EN 12927-3, EN 12927-4, EN 12927-5, EN 12927-6, EN 12927-7, EN 12927-8, EN 12929-1, EN 12929-2, EN 12930, EN 13107, EN 13223, EN 13243, prEN 13796-1,

48、prEN 13796-2 and prEN 13796-3. 5.2 Safety principles 5.2.1 General The safety principles set out in EN 12929-1 apply. In addition, the following hazard scenarios and safety measures relative to the scope of this document are to be taken into consideration. 5.2.2 Hazard scenarios The following events many lead to hazardous situations which may be avoided or limited by the safety requirements of this document: prolonged exposure of persons to bad weather conditions as for example, wind, cold, etc.; prolonged immobilisation; incompetence, unfitness, ca