EN 13035-4-2003 en Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 4 Tilting tables (Incorporates Amendment A1 2009)《平板玻.pdf

《EN 13035-4-2003 en Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 4 Tilting tables (Incorporates Amendment A1 2009)《平板玻.pdf》由会员分享，可在线阅读，更多相关《EN 13035-4-2003 en Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 4 Tilting tables (Incorporates Amendment A1 2009)《平板玻.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13035-4:2003 +A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass Safety requirements Part 4: Tilting tables ICS 81.100 National foreword This British Standard is the UK implementation of EN 13035-4:2003+A1:2009. It supersedes BS EN 13035-4:

2、2003 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparat

3、ion was entrusted by Technical Committee MCE/3, Safeguarding of machinery, to Subcommittee MCE/3/13, Glass manufacturing machines Safety. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessa

4、ry provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 13035-4:2003+A1:2009 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 23 J

5、uly 2003 BSI 2010 Amendments/corrigenda issued since publication Date Comments 28 February 2010 Implementation of CEN amendment A1:2009 ISBN 978 0 580 62971 6 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-4:2003+A1 December 2009 ICS 81.100 Supersedes EN 13035-4:2003 English Version Mach

6、ines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables Machines et installations pour la production, le faonnage et la transformation du verre plat - Prescriptions de scurit - Partie 4: Tables basculantes Maschinen und Anlagen fr di

7、e Herstellung, Be- und Verarbeitung von Flachglas - Sicherheitsanforderungen - Teil 4: Kipptische This European Standard was approved by CEN on 23 May 2003 and includes Amendment 1 approved by CEN on 8 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which sti

8、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standar

9、d exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national stand

10、ards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kin

11、gdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-4:2003+A1:20

12、09: EEN 13035-4:2003+A1:2009 (E) 2 Contents Page Foreword 3 0 Introduction 4 1 Scope 4 2 Normative references 4 3 Terms and definitions Symbols and abbreviated terms . 5 4 List of significant hazards 6 5 Safety requirements and/or protective measures 7 5.1 All-automatic tilting tables 7 5.2 Tilting

13、tables where access is intended 8 5.3 Additional requirements . 8 5.4 Noise . 9 6 Verification of safety requirements and/or protective measures . 9 7 Information for use 10 Annex A (normative) Electrical interlocking of a movable guard 12 Annex B (normative) Tilting table with safeguarding (access

14、intended) 13 Annex C (normative) Minimum gaps on tilting tables arranged as single table with free access 15 Annex D (normative) Fixed single tilting table controlled by a hold-to-run device with marking of the danger zone on floor . 17 Annex E (normative) ! ! ! !Noise-test code“ “ “ “ . 18 E.1 A-we

15、ighted emission sound pressure level determination . 18 E.2 Installation and mounting conditions 18 E.3 Operating conditions . 18 E.4 Measurement uncertainties 18 E.5 Information to be recorded . 18 E.6 Information to be reported 18 Annex ZA (informative) ! ! ! !Relationship between this European St

16、andard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC“ “ “ “ . 20 Annex ZB (informative) ! ! ! !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ “ “ “ . 21 Bibliography 22 BS EN 13035-4:2003+A1:2009EN 13035-4:2003+A1

17、:2009 (E) 3 Foreword This document (EN 13035-4:2003+A1:2009) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by

18、 publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC

19、shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-11-08. This document supersedes EN 13035-4:2003. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This docume

20、nt has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. Annexes A

21、to E are normative.“ This document is one of a series concerning machinery for the treatment and processing of flat glass. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement

22、this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and U

23、nited Kingdom. BS EN 13035-4:2003+A1:2009EN 13035-4:2003+A1:2009 (E) 4 0 Introduction This document is a type-C standard as stated in !EN ISO 12100-1“. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. Wh

24、en provisions of this type-C standard are different from those which are stated in type-A or -B standards, the provisions of this type-C standard take precedence over the provisions of the other standards for machines that have been designed and built according to the provisions of this type-C stand

25、ard. 1 Scope 1.1 This standard contains the requirements for safety for the design and installation of tilting tables, where the flat glass is brought from the horizontal almost to the vertical position or vice versa by lying on or supported at the lower edge leaning against a supporting surface. 1.

26、2 ! ! ! !This standard deals with all significant hazards, hazardous situations and events relevant to tilting tables for flat glass, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the app

27、ropriate technical measures to eliminate or reduce risks arising from the significant hazards during commissioning, operation and maintenance. Noise is not a significant hazard for this type of machines.“ 1.3 This standard is not applicable to tilting tables where all movements are done by human pow

28、er. 1.4 This standard is not applicable to additional equipment, e.g. for cutting (see !EN 13035-3“), loading and unloading (see !EN 13035-5“), break-out (see !EN 13035-6“), transporting (see EN 619) of flat glass as used as integral parts of the machinery. If there are specific risks that arise in

29、connection with tilting tables, appropriate measures are specified. 1.5 This document is not applicable to tilting tables which are manufactured before the date of publication of this document by CEN. 2 Normative references !The following referenced documents are indispensable for the application of

30、 this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !deleted text“ EN 349, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ EN 953:

31、1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 999:1998, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body !deleted text“ BS EN 13035-4:2003+A1:2009

32、EN 13035-4:2003+A1:2009 (E) 5 EN 1760-1:1997, Safety of machinery Pressure sensitive protective devices Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2:2001, Safety of machinery Pressure sensitive protective devices Part 2: Gen

33、eral principles for the design and testing of pressure sensitive edges and pressure sensitive bars !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005, modified)“ !CLC/TS 61496-2:2006, Safety of machinery Electro-sensitive protective

34、equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006)“ !EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201, Acoustics Noise emitted by m

35、achinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) EN ISO 11202, Acoustics Noise emitted by machinery and equipment Meas

36、urement of emission sound pressure levels at a work station and at other specified positions Survey method in situ (ISO 11202:1995) EN ISO 11204, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Method

37、 requiring environmental corrections (ISO 11204:1995, including Cor 1:1997) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for

38、 design Part 2: Technical principles (ISO 12100-2:2003) EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850, Safety of machinery Emergency stop Principles for design (ISO 13850:2006) EN ISO 13857:2008,

39、 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)“ !deleted text“ 3 Terms and definitions Symbols and abbreviated terms For the purposes of this European Standard, the terms and definitions given in !EN ISO 12100-1:2003“ apply. Addi

40、tional terms and definitions specifically needed for this document are added below: 3.1 table supporting surface for the deposit of sheets of flat glass 3.2 supports mechanical stops that prevent the glass sheet from sliding off during and after the tilting table is raised and that hold the glass sh

41、eet at the lower edge BS EN 13035-4:2003+A1:2009EN 13035-4:2003+A1:2009 (E) 6 3.3 tip-over safeguard device that ensures the lifting of the table only to an angle so that the glass sheet is being leant stable against the table 3.4 throw-off safeguard equipment or the manner of movement that prevents

42、 the glass sheet from being thrown off by the dynamic energy caused by the movement to the vertical 3.5 additional equipment equipment that can be additionally attached, e.g. cutting bridges, feeders, transport devices (conveyor rolls) 3.6 all automatic (tilting tables) tilting tables which work wit

43、hin a line where all operations including loading and unloading are controlled by a programme and where access for persons is not necessary during normal production 3.7 automatic (tilting tables) tilting tables where after start by a person, e.g. after loading or unloading of flat-glass dangerous mo

44、vements are controlled by a programme and not by a hold-to-run control device 4 List of significant hazards This clause contains all the significant hazards, hazardous situations and events as far as they are dealt with in this standard, identified by risk assessment as significant for this type of

45、machinery and which require action to eliminate or reduce the risk. Before using this standard, it is important to carry out a general risk assessment of the machine in question. NOTE Application of B-level standards see clause 5. ! ! ! !Table 1 List of significant hazards Hazards Preventive measure

46、s see clause 4.1 Crushing and shearing 4.1.1 between descending table and fixed supporting structure or floor 5.1.1-5.1.3; 5.2.2; 5.3.6; 5.3.7 4.1.2 between moving table and adjacent fixed parts, e.g. conveyors 5.2.2; 5.3.6; 5.3.7 4.1.3 of the feet between rising table with additional equipment and

47、floor 5.1.1-5.1.3; 5.2.3; 5.3.6; 5.3.7 4.1.4 of the finger (tips) between table and moving supports 5.1.1-5.1.3; 5.3.5-5.3.7 4.2 Cutting by glass 7.1.5 4.3 Impact by moving table 5.1.1-5.1.3; 5.2.2; 5.3.6; 5.3.7 4.4 Direct or indirect electrical contact 5.3.14 4.5 Neglecting ergonomic principles e.g

48、. hazards from: 4.5.1 excessive effort for access 5.1.1 (NOTE); 5.1.2; 5.1.3 4.5.2 neglected use of personal protection equipment 7.1.5 4.5.3 human behaviour 5.3.15; 7.1.4; 7.1.8; 7.1.9; 7.3 4.5.4 inadequate design, location of manual controls 5.2.2.2; 5.3.7; 5.3.12; 5.3.13 BS EN 13035-4:2003+A1:2009 “EN 13035-4:2003+A1:2009 (E) 7 Table 1 (continued) Hazards Preventive measures see clause 4.6 Unexpected start-up or malfunction from: 4.6.1 failure of the control system 5.1.2; 5.1.3; 5.2.1.4; 5.2.2.2; 5.3.3; 5.3.6.2; 5.3.9; 5.3.11 4.6.2 external influences 5.3.2; 5.3.8 4.7 Impossibility of stop