EN 10061-2003 en Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧六边形钢棒 尺寸 形状及尺寸公差》.pdf

《EN 10061-2003 en Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧六边形钢棒 尺寸 形状及尺寸公差》.pdf》由会员分享，可在线阅读，更多相关《EN 10061-2003 en Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions《一般用途热轧六边形钢棒 尺寸 形状及尺寸公差》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 10061:2003 Hot rolled hexagon steel bars for general purposes Dimensions and tolerances on shape and dimensions The European Standard EN 10061:2003 has the status of a British Standard ICS 77.140.60 BS EN 10061:2003 This British Standard, was published under the authority of t

2、he Standards Policy and Strategy Committee on 1 December 2003 BSI 1 December 2003 ISBN 0 580 43000 6 National foreword This British Standard is the official English language version of EN 10061:2003. The UK participation in its preparation was entrusted to Technical Committee ISE/31, Wrought steels,

3、 which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the

4、section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicatio

5、n. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor

6、 related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last is

7、sued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN10061 October2003 ICS77.140.60 Englishversion HotrolledhexagonsteelbarsforgeneralpurposesDimensions andtolerancesonshapeanddimensions HexagonesenacierlaminschaudDimensionset tolrancesurla

8、formeetlesdimensions WarmgewalzteSechskantstbeausStahlMae, FormtoleranzenundGrenzabmae ThisEuropeanStandardwasapprovedbyCENon11September2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutan

9、yalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmem

10、berintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden

11、,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN10061:2003EEN10061:2003(E)

12、 2 Contents page Foreword . 3 1 Scope 4 2 Normativereferences 4 3 Termsanddefinitions. 4 4 Designation 4 5 Dimensions 4 6 Tolerancesondimensionsandshape 6 6.1 Widthacrossflats( s) 6 6.2 Length( L). 6 6.3 Radius( r) 6 6.4 Straightness( q). 6 6.5 Twist . 6 6.6 Outofsection 6 7 Measurements . 7 7.1 Wid

13、thacrossflats . 7 7.2 Length 7 7.3 Radius 7 7.4 Straightness. 7 7.5 Twist . 7 7.6 Outofsection 7EN10061:2003(E) 3 Foreword Thisdocument(EN10061:2003)hasbeenpreparedbyTechnicalCommitteeECISS/TC11 “StructuralsteelsectionsandhotrolledsteelbarsforengineeringuseDimensionsandtolerances“, thesecretariatofw

14、hichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofan identicaltextorbyendorsement,atthelatestbyApril2004,andconflictingnationalstandardsshall bewithdrawnatthelatestbyApril2004. ThisEuropeanStandardreplaces: EURONORM6182 Hotrolledsteelhexagons. Accordi

15、ngtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthe followingcountriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy,Luxembourg, Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Swede

16、n,SwitzerlandandtheUnited Kingdom.EN10061:2003(E) 4 1Scope ThisEuropeanStandardspecifiesthenominaldimensionsandthetolerancesondimensionsand shapeofhotrolledsteelhexagonbars. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromother publications.Thesenormative

17、referencesarecitedattheappropriateplacesinthetext,andthe publicationsarelistedhereafter.Fordatedreferencessubsequentamendmentstoorrevisionsofany ofthesepublicationsapplytothisEuropeanStandardonlywhenincorporatedinitbyamendmentor revision.Forundatedreferencesthelatesteditionofthepublicationreferredto

18、applies(including amendments). EN10079:1992, Definitionofsteelproducts EN100881, StainlesssteelsPart1:Listofstainlesssteels 3 Termsanddefinitions ForthepurposesofthisEuropeanStandardthetermsanddefinitionsgiveninEN10079:1992apply. 4Designation Thedesignationofhotrolledsteelhexagonbarsshallcomprise: t

19、heterm”hexagonbar”; thenumberofthisEuropeanStandard(EN10061); dimensionsinmm(widthacrossflatsxlength(M,F,orE,seeTable3); thenumberofthequalitystandardandthesteelnameorsteelnumberoftheorderedsteel. EXAMPLE HexagonbarEN1006116x6000M steelEN10025S235JR 5Dimensions HotrolledhexagonbarscomplyingwiththisE

20、uropeanStandardshallbeproducedwiththespecified dimensionsrangegiveninTable1andillustratedinFigure1.Thepreferreddimensionsare presentedinTable1.EN10061:2003(E) 5 Figure1Hotrolledhexagonbars Table1Preferreddimensions,massanddimensionaltolerancesofhotrolledhexagonbars Width acrossflats Limit deviation

21、Mass b,c Areaofcross section Width acrossflats Limit deviation a Mass b,c Areaofcross section ss (mm) (mm) (kg/m) (cm 2 ) (mm) (mm) (kg/m) (cm 2) 13 1,15 1,46 37.5 9,56 12,2 14 0,4 1,33 1,70 39.5 0,8 10,6 13,5 15 1,53 1,95 42,5 12,3 15,6 16 1,74 2,22 47,5 15,3 19,5 17 1,96 2,50 52 18,4 23,4 18 2,20

22、2,81 57 22,1 28,1 19 0,5 2,46 3,13 62 1,0 26,1 33,3 20,5 2,86 3,64 67 30,5 38,9 22,5 3,44 4,38 72 35,2 44,9 23,5 3,75 4,78 78 41,4 52,7 25,5 4,42 5,63 83 46,8 59,7 28,5 0,6 5,52 7,03 88 1,3 52,6 67,1 31,5 6,75 8,59 93 58,8 74,9 33,5 7,63 9,72 98 65,3 83,2 35,5 0,8 8,56 10,9 103 1,5 72,1 91,9 a Wheno

23、rdering,thetotalrangesforthepermissibledeviationsmay,byagreement,beentirelyontheplusside, EXAMPLE 200 0 + mm(insteadof 100mm)inthecaseoffixedlengths,or 50 0 + mm(insteadof 25mm)inthecaseofexactlengths b Calculatedusingdensityof7,85kg/dm 3 . c Themassesofstainlesssteelbarsshallbemultipliedbythefactor

24、saccordingtoEN100881.EN10061:2003(E) 6 6 Tolerancesondimensionsandshape 6.1 Widthacrossflats( s) Thedeviationfromnominalwidthacrossflats( s)shallbewithinthetolerancegiveninTable1. 6.2Length ( L) Dependingonthetypeoflengththehexagonbarsshallbecuttolengthswithintolerancesgivenin Table3. 6.3 Radius( r)

25、 TheradiusshallcomplywiththerequirementsgiveninTable2. 6.4Straightness ( q) ThestraightnessshallcomplywiththerequirementsgiveninTable2.Therequirementsforwaviness maybeagreedatthetimeofenquiryandorder. 6.5Twist Thedegreeoftwistmaybeagreedattimeofenquiryandorder. 6.6Outofsection Theoutofsectionshallbe

26、within75%ofthetolerancebandgiveninTable1. Table2Tolerancesonradiusandstraightnessofhotrolledhexagonbars Dimensionsinmm Radius r Nominalwidthacrossflats r max. s 20,0 1,5 20,0 s 28,5 2,0 28,5 s 48,0 2,5 48,0 s 83,0 3,0 83,0 s 103,0 3,5 Straightness q Nominalwidthacrossflats q max. s 39,5 Notfixed 39,

27、5 s 83,0 0,0040x L 83,0 s 103,0 0,0025x L EN10061:2003(E) 7 Table3Tolerancesonlengths Typeoflength a Range (mm) Limitdeviations b Manufacturinglength(M) 3000to13000witharangeof 2000perorderitem. 10%ofbarssuppliedmaybebelowthe minimumfortheorderedrangebutnotless than75%oftheminimumoftherange. Fixedle

28、ngth(F) 3000to13000 100mm 6000 25mm 6000to 50mm Exactlength(E) 13000 a Thepurchasershallindicateintheenquiryandorderthetypeoflengthrequiredandthelengthrangeorlength required. b Whenordering,thetotalrangesforthepermissibledeviationsmay,byagreement,beentirelyontheplusside, EXAMPLE. 200 0 + mm(insteado

29、f 100mm)inthecaseoffixedlengths,or 50 0 + mm(insteadof 25mm)inthecaseofexactlengths. 7Measurements 7.1 Widthacrossflats Thewidthacrossflatsshallbemeasuredatanypointsituatedatleast100mmfromtheendofthe hexagonbar.Shearingmaydeformthebarends.Theconditionofendsmaybeagreedattimeof enquiryandorder. 7.2Len

30、gth Thelengthshallbemeasuredasthelongestlengthofthehexagonbar. 7.3Radius Theradiusshallbemeasuredbyaradiusgaugeatanypointsituatedatleast100mmfromtheendof thehexagonbar. 7.4Straightness Thestraightnessshallbemeasuredoverthetotallength( L)ofthehexagonbar. 7.5Twist Themethodofmeasurementoftwistshallbea

31、greedattimeofenquiryandorder. 7.6Outofsection Outofsectionshallbemeasuredasthedifferencebetweenthelargestandsmallestwidthacross flats s 1 and s 2 .BS EN 10061:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparin

32、g British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.

33、It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside f

34、ront cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications s

35、hould be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have

36、 been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also

37、available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of st

38、andards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information abou

39、t BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract ma

40、y be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols,

41、and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.