ECMA 345-2003 Private Integrated Services Network (PISN) Use of QSIG for Message Centre Access (MCA) Profile Standard《专用综合业务网络(PISN) 消息中心接入(MCA)轮廓标准用QSIG的使用》.pdf

《ECMA 345-2003 Private Integrated Services Network (PISN) Use of QSIG for Message Centre Access (MCA) Profile Standard《专用综合业务网络(PISN) 消息中心接入(MCA)轮廓标准用QSIG的使用》.pdf》由会员分享，可在线阅读，更多相关《ECMA 345-2003 Private Integrated Services Network (PISN) Use of QSIG for Message Centre Access (MCA) Profile Standard《专用综合业务网络(PISN) 消息中心接入(MCA)轮廓标准用QSIG的使用》.pdf（75页珍藏版）》请在麦多课文档分享上搜索。

1、 Standard ECMA-345 June 2003 International Standardizing Information and Communication Systems Private Integrated Services Network (PISN) Use of QSIG for Message Centre Access (MCA) Profile Standard Phone/Fax: +41 22 849.60.00/01 - http:/www.ecma-international.org - mailto: helpdeskecma.ch Standard

2、ECMA-345 International June 2003 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) Use of QSIG for Message Centre Access (MCA) Profile Standard Phone/Fax: +41 22 849.60.00/01 - http:/www.ecma-international.org - mailto: helpdeskecma.ch IW Ecma-345.doc 16-

3、07-03 09,47 Brief History This Standard is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Sy

4、stems Interconnection as defined by ISO/IEC. It has been produced under ETSI work item DTS/ECMA-00223. This Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other interna

5、tional and regional standardization bodies. It represents a pragmatic and widely based consensus. This ECMA Standard has been adopted by the General Assembly of June 2003. - i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Definitions 2 4.1 External definitions 2 4.2 Serv

6、ed User 3 4.3 Served User PINX 4 4.4 Message Centre 4 4.4.1 MCM Message Centre 4 4.4.2 MWI Message Centre 4 4.5 MCA-Profile-1 4 4.6 MCA-Profile-2 4 4.7 MCA-Profile-3 4 4.8 MCA-Profile-4 4 4.9 Message Deposit 4 4.9.1 Direct Message Deposit 4 4.9.2 Message Deposit after Diversion 4 4.9.3 Message Depos

7、it after Transfer 5 4.10 Message Centre Monitoring 5 4.11 Message Browsing 5 4.12 Message Retrieval 5 4.13 Message Centre Transfer 5 5 Acronyms 5 6 Specification framework 6 6.1 General Description 6 6.2 Scenarios 6 6.2.1 Message Deposit 6 6.2.2 Message Centre Monitoring 7 6.2.3 Message Browsing 7 6

8、.2.4 Message Retrieval 7 6.2.5 Message Centre Transfer 7 7 Profiles 8 7.1 MCA-Profile-1 8 7.1.1 Message Deposit 8 7.1.2 Message Centre Monitoring 9 7.1.3 Message Browsing 9 7.1.4 Message Retrieval 9 7.1.5 Message Centre Transfer 9 - ii - 7.2 MCA-Profile-2 9 7.2.1 Message Deposit 9 7.2.2 Message Cent

9、re Monitoring 10 7.2.3 Message Browsing 10 7.2.4 Message Retrieval 10 7.2.5 Message Centre Transfer 10 7.3 MCA-Profile-3 11 7.3.1 Message Deposit 11 7.3.2 Message Centre Monitoring 11 7.3.3 Message Browsing 11 7.3.4 Message Retrieval 12 7.3.5 Message Centre Transfer 12 7.4 MCA-Profile-4 12 7.4.1 Mes

10、sage Deposit 12 7.4.2 Message Centre Monitoring 12 7.4.3 Message Browsing 12 7.4.4 Message Retrieval 12 7.4.5 Message Centre Transfer 13 Annex A - Requirements List (RL) 15 Annex B - Profile specific ICS proforma 39 Annex C - Example Message Flows 53 1 Scope This Profile Standard specifies the combi

11、nation of base standards, together with the selection of appropriate options and parameter values, necessary to specify how QSIG / PSS1 can be used for Message Centre Access (MCA) procedures. This Standard identifies the necessary or optional employment of particular functions, procedures and servic

12、es for a Calling User to deposit messages for a Served User at a Message Centre, a Served User to monitor the Served Users Mailbox for new messages, a Served User to browse through the messages saved in the Served Users Mailbox, a Served User to retrieve the messages saved in the Served Users Mailbo

13、x and a Served User to get connected to the Originator of a message or any other destination. 2 Conformance A system conforms to this Standard if it correctly performs all the mandatory capabilities defined in one or more of the requirement list (RL) (annex A) and one or more of the profile specific

14、 ICS (annex B). NOTE For the purpose of this Standard capabilities marked as optional in the base standards may be mandatory or excluded. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. All standards a

15、re subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number

16、of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Services Network (PISN) Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-142 Private Integrated Services Network (PISN) Circuit

17、Mode 64kbit/s Bearer Services Service Description, Functional Capabilities and Information Flows (International Standard ISO/IEC 11574) ECMA-143 Private Integrated Services Network (PISN) Circuit Mode Bearer Services Inter-Exchange Signalling Procedures and Protocol (International Standard ISO/IEC 1

18、1572) ECMA-155 Private Integrated Services Network Addressing (International Standard ISO/IEC 11571) ECMA-165 Private Integrated Services Network (PISN) Generic Functional Protocol for the Support of Supplementary Services Inter-Exchange Signalling Procedures and Protocol (International Standard ISO

19、/IEC 11582) ECMA-173 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Call Diversion Supplementary Services (CFSD) (International Standard ISO/IEC 13872) ECMA-174 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Call Divers

20、ion Supplementary Services (QSIG-CF) (International Standard ISO/IEC 13873) ECMA-177 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Call Transfer Supplementary Service (CTSD) (International Standard ISO/IEC 13865) - 2 - ECMA-178 Private Integrated Se

21、rvices Network (PISN) Inter-Exchange Signalling Protocol Call Transfer Supplementary Service (QSIG-CT) (International Standard ISO/IEC 13869) ECMA-241 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Message Waiting Indication Supplementary Service (MW

22、ISD) (International Standard ISO/IEC 15505) ECMA-242 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Message Waiting Indication Supplementary Service (QSIG-MWI) (International Standard ISO/IEC 15506) ECMA-299 Private Integrated Services Network (PISN) Specification, Fun

23、ctional Model and Information Flows Single Step Call Transfer Supplementary Service (SSCT-SD) (International Standard ISO/IEC 19459) ECMA-300 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Single Step Call Transfer Supplementary Service (QSIG-SSCT) (International Stand

24、ard ISO/IEC 19460) ECMA-310 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Simple Dialog Supplementary Service (SDSD) (International Standard ISO/IEC 21407) ECMA-311 Private Integrated Services Network (PISN) Inter-Exchange Signalling Protocol Simple

25、 Dialog Supplementary Service (QSIG-SD) (International Standard ISO/IEC 21408) ECMA-343 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Make Call Request Supplementary Service (MCRSD) ECMA-344 Private Integrated Services Network (PISN) Inter-Exchange

26、Signalling Protocol Make Call Request Supplementary Service (QSIG-MCR) ECMA-346 Private Integrated Services Network (PISN) Specification, Functional Model and Information Flows Message Centre Monitoring and Mailbox Identification Supplementary Services (MCM-SD / MID-SD) ECMA-347 Private Integrated S

27、ervices Network (PISN) - Inter-Exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification Supplementary Services (QSIG-MCM / QSIG-MID) ECMA TR/76 Private Integrated Services Network (PISN) Architecture and Scenarios for Private Integrated Services Networking (ISO/IEC TR 14475)

28、 ISO/IEC 9646-7 Information technology Open Systems Interconnection Conformance testing methodology and framework Part 7: Implementation Conformance statements (1994) ITU-T Rec. E.164 The international public telecommunication numbering plan (1997) 4 Definitions For the purposes of this Standard, th

29、e following definitions apply. 4.1 External definitions This Standard uses the following terms defined in other documents: Basic Call (ECMA-165) Call (ECMA-165) Call Independent Signalling Connection (ECMA-165) Call Related (ECMA-165) Complete Number (ECMA-155) - 3 - Compressed Information (ECMA-346

30、) Display information (ECMA-310) Diverted-to PINX (ECMA-174) Keypad information (ECMA-310) Mailbox (ECMA-346) Mailbox Identification (ECMA-346) Make Call Request (ECMA-343) Message Centre (ECMA-346) Message Centre PINX (ECMA-347) Message Type (ECMA-346) Message Status (ECMA-346) MCR Co-operating PIN

31、X (ECMA-344) MCR Co-operating User (ECMA-343) MCR Destination PINX (ECMA-344) MCR Destination User (ECMA-343) MCR Requesting PINX (ECMA-344) MCR Requesting User (ECMA-343) New Message (ECMA-346) Original Call (ECMA-343) Originator (ECMA-346) Private Integrated Services Network (PISN) (ECMA-133) Priv

32、ate Integrated services Network eXchange (PINX) (ECMA-133) Requested Call (ECMA-343) Rerouting PINX (ECMA-174) Retrieved Message (ECMA-346) Secondary Call (ECMA-178) Served User (ECMA-173, ECMA-346) Server User (ECMA-310) Served User PINX (ECMA-174, ECMA-347) Server User PINX (ECMA-311) Transferred

33、User (ECMA-299) Transferring User (ECMA-178) Telecommunication Service (ECMA-142) User (ECMA-142) User B (ECMA-177) Q reference point (ECMA-133) 4.2 Served User The Served User as defined in Message Centre Monitoring (ECMA-346). For MCA, the Served User may also act as Served User in Call Diversion

34、(as defined in ECMA-173), as a User B in Call Transfer (as defined in ECMA-177), as a Client User in Simple Dialog (as defined in ECMA-310), as a Transferred User - 4 - in Single Step Call Transfer (as defined in ECMA-299) and as a Co-operating User in Make Call Request (as defined in ECMA-343). 4.3

35、 Served User PINX The Served User PINX as defined in ECMA-347. For MCA, the Served User PINX may also act as Served User PINX or Rerouting PINX for Call Diversion (as defined in ECMA-173), as a Primary PINX for Call Transfer (as defined in ECMA-177), as a Client User PINX for Simple Dialog (as defin

36、ed in ECMA-311), as a Transferred PINX for Single Step Call Transfer (as defined in ECMA-300) and as a Co-operating PINX for Make Call Request (as defined in ECMA-344). 4.4 Message Centre Depending on the MCA-Profile, either the MCM or the MWI Message Centre. 4.4.1 MCM Message Centre The Message Cen

37、tre as defined in ECMA-346. This definition is used in MCA-Profile-3 and MCA-Profile-4. For MCA, the MCM Message Centre may also act as Diverted-to PINX for Call Diversion (as defined in ECMA-174), as a Server User PINX for Simple Dialog (as defined in ECMA-311), a Transferring PINX for Call Transfe

38、r (as defined in ECMA-178), a Transferring PINX for Single Step Call Transfer (as defined in ECMA-300) and a Requesting PINX for Make Call Request (as defined in ECMA-344). 4.4.2 MWI Message Centre The Message Centre as defined in ECMA-241. This definition is used in MCA-Profile-1 and MCA-Profile-2.

39、 For MCA, the MWI Message Centre may also act as Diverted-to PINX for Call Diversion (as defined in ECMA-174), as a Server User PINX for Simple Dialog (as defined in ECMA-311), as a Transferring PINX for Call Transfer (as defined in ECMA-178) and as a Transferring PINX for Single Step Call Transfer

40、(as defined in ECMA-300). 4.5 MCA-Profile-1 MCA-Profile-1 is a profile, which describes the interoperation of supplementary services for Message Centre Access purposes. Supplementary services involved in MCA-Profile-1 are Call Diversion, Message Waiting Indication and Call Transfer. 4.6 MCA-Profile-

41、2 MCA-Profile-2 is a profile, which describes the interoperation of supplementary services for Message Centre Access purposes. Supplementary services involved in MCA-Profile-2 are Call Diversion, Message Waiting Indication, Call Transfer, Single Step Call Transfer and Simple Dialog. 4.7 MCA-Profile-

42、3 MCA-Profile-3 is a profile, which describes the interoperation of supplementary services for Message Centre Access purposes. Supplementary services involved in MCA-Profile-3 are Call Diversion, Call Transfer, Single Step Call Transfer, Simple Dialog, Message Centre Monitoring and Mailbox Identific

43、ation. 4.8 MCA-Profile-4 MCA-Profile-4 is a profile, which describes the interoperation of supplementary services for Message Centre Access purposes. Supplementary services involved in MCA-Profile-4 are Call Diversion, Call Transfer, Single Step Call Transfer, Simple Dialog, Message Centre Monitorin

44、g, Mailbox Identification and Make Call Request. 4.9 Message Deposit The part of MCA describing how an Originator can deposit a Message in a Served Users Mailbox at a Message Centre. 4.9.1 Direct Message Deposit The part of MCA describing how an Originator can deposit a Message in a Served Users Mai

45、lbox by directly calling the Message Centre, i.e. without a prior call to the Served User. 4.9.2 Message Deposit after Diversion The part of MCA describing how an Originator can deposit a Message in a Served Users Mailbox if the Originator gets diverted to the Served Users Mailbox. - 5 - 4.9.3 Messa

46、ge Deposit after Transfer The part of MCA describing how an Originator can deposit a Message in a Served Users Mailbox if the Originator gets transferred to the Served Users Mailbox. 4.10 Message Centre Monitoring The part of MCA describing how a Message Centre informs a Served User about the status

47、 and status changes of Messages in the Served Users Mailbox. 4.11 Message Browsing The part of MCA describing how a Served User can contact a Message Centre to get access to the Served Users Mailbox, for example; configuration update, message browsing or message deletion purposes. 4.12 Message Retri

48、eval The part of MCA describing how a Served User can retrieve Messages from the Served Users Mailbox. 4.13 Message Centre Transfer The part of MCA describing how a Served User can request the Message Centre to get connected (e.g. transferred) to the Originator of a specific Message or any other des

49、tination. 5 Acronyms APDU Application Protocol Data Unit ASN.1 Abstract Syntax Notation One BC Basic Call CF Supplementary Service Call Diversion CISC Call Independent Signalling Connection CN Corporate telecommunication NetworkCT Supplementary Service Call Transfer DTMF Dual Tone Multiple Frequency GF Generic Functional protocol (for the support of supplementary services) MCA Message Centre Access MCM Supp